PoE HAT (C)
From Waveshare Wiki
| ||
Instroduction
This Power Over Ethernet HAT (Type B) is designed for Raspberry Pi 3B+/4B, it supports 802.3af Power-Sourcing equipment for PoE function.
Features
- Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B
- PoE (Power Over Ethernet) capability,802.3af-compliant
- Fully isolated switched-mode power supply (SMPS)
- 0.91" OLED, for monitoring processor temperature, IP address, and fan status in real-time
- Onboard cooling fan, allows auto running on powerup OR programmable control, configured by the switch
- Integrates PCF8574 IO expander for I2C bus, providing pin P0 for directly fan control, and more spare IO pin
Specifications
- PoE Power input: 37V ~ 57V DC in
- PoE Power output: 5V 2.5A DC out
- Network standard: 802.3af PoE
- Dimensions: 56.5mm x 65mm
- OLED size: 0.91inch
- OLED pixels: 128x32
- OLED driver: SSD1306
- OLED display color: White
Examples
Hardware connection
You need to connect the PoE HAT to Raspberry Pi as picture
Resources
Documents
Support
Support
If you require technical support, please go to the Support page and open a ticket.