Difference between revisions of "PoE HAT (C)"
From Waveshare Wiki
| Line 10: | Line 10: | ||
}} | }} | ||
==Instroduction== | ==Instroduction== | ||
| − | + | PoE HAT (C) is a Power over Ethernet (PoE) expansion board for Raspberry Pi 3B+/4B, supporting IEEE 802.3af/at network standard. If you have a PoE router or switch that supports the IEEE 802.3af/at network standard, then take me and you only need a network cable to connect to your Raspberry Pi to achieve networking and power supply | |
===Features=== | ===Features=== | ||
| − | * | + | *Based on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi 3B+/4B |
| − | *PoE | + | *Support PoE power over Ethernet, support IEEE 802.3af/at PoE network standard |
| − | * | + | *Using a fully isolated switch mode power supply (SMPS) |
| − | * | + | *Onboard USB Type A interface, while satisfying the stable power supply of the Raspberry Pi, it can also supply power to additional external devices |
| − | *Onboard cooling fan | + | *Onboard high-speed active cooling fan for better heat dissipation |
| − | |||
===Specifications=== | ===Specifications=== | ||
| − | * | + | *POE input voltage: 37V ~ 57V DC input |
| − | * | + | *POE-USB Type A output voltage: 5V 4A (MAX) |
| − | *Network standard: 802.3af PoE | + | *POE-Pin header output voltage: 12V 2A (MAX) |
| − | * | + | *Network standard: Support IEEE 802.3af/at PoE |
| − | + | *Product size: 56.5 × 65mm | |
| − | + | ||
| − | |||
| − | |||
==Examples== | ==Examples== | ||
===Hardware connection=== | ===Hardware connection=== | ||
Revision as of 02:51, 20 April 2021
| ||
Instroduction
PoE HAT (C) is a Power over Ethernet (PoE) expansion board for Raspberry Pi 3B+/4B, supporting IEEE 802.3af/at network standard. If you have a PoE router or switch that supports the IEEE 802.3af/at network standard, then take me and you only need a network cable to connect to your Raspberry Pi to achieve networking and power supply
Features
- Based on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi 3B+/4B
- Support PoE power over Ethernet, support IEEE 802.3af/at PoE network standard
- Using a fully isolated switch mode power supply (SMPS)
- Onboard USB Type A interface, while satisfying the stable power supply of the Raspberry Pi, it can also supply power to additional external devices
- Onboard high-speed active cooling fan for better heat dissipation
Specifications
- POE input voltage: 37V ~ 57V DC input
- POE-USB Type A output voltage: 5V 4A (MAX)
- POE-Pin header output voltage: 12V 2A (MAX)
- Network standard: Support IEEE 802.3af/at PoE
- Product size: 56.5 × 65mm
Examples
Hardware connection
You need to connect the PoE HAT to Raspberry Pi as picture
Resources
Documents
Support
Support
If you require technical support, please go to the Support page and open a ticket.