Difference between revisions of "PoE HAT (C)"

From Waveshare Wiki
Jump to: navigation, search
m (Text replacement - "==Support==" to "")
Line 1: Line 1:
 
{{infobox item|
 
{{infobox item|
|img=[[File:PoE-HAT-C-1.jpg|400px|link=https://www.waveshare.com/poe-hat-c.htm|PoE HAT (C)]]
+
|img=[[File:PoE-HAT-C-1.jpg|400px|{{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/poe-hat-c.htm}}|PoE HAT (C)]]
 
|caption=PoE HAT (C) is a Power over Ethernet (PoE) expansion board for Raspberry Pi 3B+/4B, supporting IEEE 802.3af/at network standard
 
|caption=PoE HAT (C) is a Power over Ethernet (PoE) expansion board for Raspberry Pi 3B+/4B, supporting IEEE 802.3af/at network standard
 
|brand=Waveshare
 
|brand=Waveshare

Revision as of 11:28, 6 June 2022

PoE HAT (C)
PoE HAT (C)

PoE HAT (C) is a Power over Ethernet (PoE) expansion board for Raspberry Pi 3B+/4B, supporting IEEE 802.3af/at network standard
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Instroduction

PoE HAT (C) is a Power over Ethernet (PoE) expansion board for Raspberry Pi 3B+/4B, supporting IEEE 802.3af/at network standard. If you have a PoE router or switch that supports the IEEE 802.3af/at network standard, then take me and you only need a network cable to connect to your Raspberry Pi to achieve networking and power supply

Features

  • Based on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi 3B+/4B
  • Support PoE power over Ethernet, support IEEE 802.3af/at PoE network standard
  • Using a fully isolated switch mode power supply (SMPS)
  • Onboard USB Type A interface, while satisfying the stable power supply of the Raspberry Pi, it can also supply power to additional external devices
  • Onboard high-speed active cooling fan for better heat dissipation

Specifications

  • POE input voltage: 37V ~ 57V DC input
  • POE-USB Type A output voltage: 5V 4A (MAX)
  • POE-Pin header output voltage: 12V 2A (MAX)
  • Network standard: Support IEEE 802.3af/at PoE
  • Product size: 56.5 × 65mm

Examples

Hardware connection

You need to connect the PoE HAT to Raspberry Pi as picture
PoE-HAT-C-details-5.jpg

Heat sink

Heat sink installation
PoE-HAT-C-1-1.jpg



Support

If you require technical support, please go to the Support page and open a ticket.