PoE HAT (B)

PoE HAT (B) Power Over Ethernet HAT (Type B) For Raspberry Pi 3B+/4B, 802.3af Power-Sourcing Equipment Required

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute Category: {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website English: Website Chinese: 中文网站

Onboard Interfaces I2C RPi

Related Products

Instroduction

This Power Over Ethernet HAT (Type B) is designed for Raspberry Pi 3B+/4B, it supports 802.3af Power-Sourcing equipment for PoE function.

Features

• Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B
• PoE (Power Over Ethernet) capability，802.3af-compliant
• Fully isolated switched-mode power supply (SMPS)
• 0.91" OLED, for monitoring processor temperature, IP address, and fan status in real-time
• Onboard cooling fan, allows auto running on powerup OR programmable control, configured by the switch
• Integrates PCF8574 IO expander for I2C bus, providing pin P0 for directly fan control, and more spare IO pin

Specifications

• PoE Power input: 37V ~ 57V DC in
• PoE Power output: 5V 2.5A DC out
• Network standard: 802.3af PoE
• Dimensions: 56.5mm x 65mm
• OLED size: 0.91inch
• OLED pixels: 128x32
• OLED driver: SSD1306
• OLED display color: White

Examples

Hardware connection

You need to connect the PoE HAT to Raspberry Pi as picture

Libraries Installation for RPi

Open the terminal of Raspberry Pi and install libraries as guides below

Install WiringPi Library

cd
sudo apt-get install wiringpi
wget https://project-downloads.drogon.net/wiringpi-latest.deb
sudo dpkg -i wiringpi-latest.deb
gpio -v

Install C Library bcm2835

cd
wget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.60.tar.gz
tar zxvf bcm2835-1.60.tar.gz 
cd bcm2835-1.60/
sudo ./configure
sudo make && sudo make check && sudo make install

For more information and the newest libraries please refer to website：http://www.airspayce.com/mikem/bcm2835/

Install Python Library

sudo pip3 install pillow
sudo pip3 install numpy
sudo apt-get install libopenjp2-7
sudo apt install libtiff
sudo apt install libtiff5
sudo apt-get install libatlas-base-dev

For python2

cd
sudo apt-get update
sudo apt-get install python-pip
sudo pip install RPi.GPIO
sudo pip smbus

For python3

cd
sudo apt-get update
sudo apt-get install python3-pip
sudo pip3 install RPi.GPIO
sudo pip3 smbus

Download example

Open a terminal and download with commands below.

cd
sudo apt-get install p7zip-full
wget https://www.waveshare.com/w/upload/b/b7/PoE_HAT_B_code.7z
7z x PoE_HAT_B_code.7z -r -o./PoE_HAT_B_code

Run the example

Open a terminal and run the example

C

cd ~/PoE_HAT_B_code/c/
make clean 
make
sudo ./main

python

cd ~/PoE_HAT_B_code/python/
sudo python main.py

Set the temperature threshold

C

sudo nano ~/PoE_HAT_B_code/c/examples/main.c

Modify the last parameter of POE_HAT_Display() and save

python

sudo nano ~/PoE_HAT_B_code/python/examples/main.py

Modify the last parameter of POE.POE_HAT_Display() and save

Auto-run

Modify rc.local file

sudo nano /etc/rc.local

• Add the following line in front of the line exit 0

fi
sudo /home/pi/PoE_HAT_B_code/c/main &
#exit 0

Resources

Documents

• SSD1306 datasheet
• SI3404 datasheet
• Schematic

Example

• Codes

Support

Please contact us by Email/Skype/WeChat for technology support.Our response may be delay, you can just leave your questions, we will reply to you as soon as possible in working time.

	[email protected]
	[email protected]
	09:00 - 18:00 (UTC+8 Monday to Staturday)