Difference between revisions of "PoE/ETH/USB HUB HAT"
From Waveshare Wiki
Line 1: | Line 1: | ||
{{Infobox item| | {{Infobox item| | ||
+ | |name = PoE/ETH/USB HUB HAT | ||
+ | |name2 = PoE/ETH/USB HUB BOX | ||
|img=[[File:PoE-ETH-USB-HUB-HAT-1.jpg|300px|link=https://www.waveshare.com/poe-eth-usb-hub-hat.htm|alt=PoE/ETH/USB HUB HAT]] | |img=[[File:PoE-ETH-USB-HUB-HAT-1.jpg|300px|link=https://www.waveshare.com/poe-eth-usb-hub-hat.htm|alt=PoE/ETH/USB HUB HAT]] | ||
+ | |img2=[[File:PoE-ETH-USB-HUB-BOX-details-1.jpg|300px|link=https://www.waveshare.com/poe-eth-usb-hub-box.htm|alt=PoE-ETH-USB-HUB-BOX]] | ||
|category={{Category:Raspberry Pi}} | |category={{Category:Raspberry Pi}} | ||
|brand=Waveshare | |brand=Waveshare | ||
Line 39: | Line 42: | ||
*[https://www.waveshare.com/w/upload/4/41/ETH_USB_HUB_HAT_SchDoc.pdf USB HUB schematic] | *[https://www.waveshare.com/w/upload/4/41/ETH_USB_HUB_HAT_SchDoc.pdf USB HUB schematic] | ||
*[https://www.waveshare.com/w/upload/5/56/USB_HUB_Board_SchDoc.pdf POE schematic] | *[https://www.waveshare.com/w/upload/5/56/USB_HUB_Board_SchDoc.pdf POE schematic] | ||
+ | *[https://www.waveshare.com/w/upload/e/ef/PoE-ETH-USB-HUB-BOX-Assembly.jpg PoE-ETH-USB-HUB-BOX Assembly] | ||
</div> | </div> | ||
<div class="tabbertab" title="FAQ"> | <div class="tabbertab" title="FAQ"> |
Revision as of 06:08, 26 November 2021
| ||
| ||
Instructions
The PoE/ETH/USB HUB HAT is a PoE (Power over Ethernet) USB HUB HAT designed for Raspberry Pi Zero. By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable, along with 3x extended USB ports.
Features
- Designed for Raspberry Pi Zero, compatible with Zero series boards
- Incorporates RTL8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port
- PoE (Power over Ethernet) feature, 802.3af-compliant
- Fully isolated SMPS (Switch Mode Power Supply)
- 3x extended USB ports, compatible with USB 2.0 / 1.1
Specification
- POE power input: 37V ~ 57V DC in
- Power Output: 5V 2.5A DC out
- Network standard: IEEE 802.3af-compliant PoE
- Dimensions: 23.10 × 65.00 mm
Hardware connection
Designed For Raspberry Pi Zero, Compatible With Zero / Zero W / Zero WH
Application Example:
FAQ
Answer:
Please connect the USB HUT interface to the PC by USB cable to check if the HUB can be recognized. If the HUB can be recognized by PC but not the Pi, please check if you have connected the USB connector tightly. And if you have set the USB port of Pi zero for networking, it cannot be used with the USB HUB either.