PoE/ETH/USB HUB HAT

From Waveshare Wiki
Revision as of 11:50, 6 May 2021 by Eng35 (talk | contribs) (Created page with "{{Infobox item| |img=300px|link=https://www.waveshare.com/poe-eth-usb-hub-hat.htm|alt=PoE/ETH/USB HUB HAT |category={{Category:Raspberry Pi}...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
PoE/ETH/USB HUB HAT
PoE/ETH/USB HUB HAT
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Instructions

The PoE/ETH/USB HUB HAT is a PoE (Power over Ethernet) USB HUB HAT designed for Raspberry Pi Zero. By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable, along with 3x extended USB ports. --Features--

  • Designed for Raspberry Pi Zero, compatible with Zero series boards
  • Incorporates RTL8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port
  • PoE (Power over Ethernet) feature, 802.3af-compliant
  • Fully isolated SMPS (Switch Mode Power Supply)
  • 3x extended USB ports, compatible with USB 2.0 / 1.1

Specification

  • POE power input: 37V ~ 57V DC in
  • Power Output: 5V 2.5A DC out
  • Network standard: IEEE 802.3af-compliant PoE
  • Dimensions: 23.10 × 65.00 mm

Hardware connection

Designed For Raspberry Pi Zero, Compatible With Zero / Zero W / Zero WH

PoE-ETH-USB-HUB-HAT-details-8.jpg

Application Example:

PoE-ETH-USB-HUB-HAT-details-7.jpg

Resources

Document

FAQ

Support

Support

If you require technical support, please go to the Support page and open a ticket.