PiRacer AI Kit

From Waveshare Wiki
Revision as of 09:13, 25 August 2022 by Eng52 (talk | contribs) (→‎Resouces)
Jump to: navigation, search
PiRacer AI Kit
PiRacer AI Kit

Racing Robot Kit base on Raspberry Pi
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

PiRacer DonkeyCar — AI Autonomous Racing Robot Powered by Raspberry Pi 4, Deep Learning, Self Driving.

Feature

  • Three onboard 2600mAh 18650 batteries, up to 12.6V voltage output, and stronger motor power.
  • On-board lithium battery protection circuit with anti-overcharge, anti-over-discharge, anti-over-current, and short-circuit protection functions.
  • On-board voltage regulator chip, which can provide stable 5V voltage to Raspberry Pi.
  • The onboard motor driver chip can drive the left and right motors to work.
  • Onboard 0.91-inch 128 × 32 resolution OLED, real-time display of car IP address, memory, power, etc.
  • The onboard ADS1115 AD acquisition chip is convenient for real-time monitoring of battery power.

Assembly


Schematic


Guide of DonkeyCar

Resouces

FAQ

 Answer:
Equipped with three 18650 type batteries, that is, the direct size is 18mm and the length is 65mm. The standard voltage of a single cell is generally 3.7V, and the fully charged voltage is generally 4.2V.

{{{5}}}


 Answer:
Length: 240mm, width: 196mm, height: 130mm.

{{{5}}}


Support

If you require technical support, please go to the Support page and open a ticket.