Difference between revisions of "NodeMCU-32-S2-Kit"

From Waveshare Wiki
Jump to: navigation, search
m (Text replacement - "*[email protected] (When sending questions, please cc <font color="red">[email protected]</font> )" to "*[email protected] (For questions, please cc <font color="red">[email protected]</font> )")
m (Text replacement - "==Support==" to "")
Line 71: Line 71:
 
[https://blog.csdn.net/Boantong_/article/details/107466493 ④ In the smart home lighting industry, how to understand PWM smooth dimming?]
 
[https://blog.csdn.net/Boantong_/article/details/107466493 ④ In the smart home lighting industry, how to understand PWM smooth dimming?]
  
==Support==
+
 
 
*[email protected] (For questions, please cc  <font color="red">[email protected]</font> )
 
*[email protected] (For questions, please cc  <font color="red">[email protected]</font> )
  
 
<!--{{Service00}}-->
 
<!--{{Service00}}-->

Revision as of 09:04, 6 June 2022

NodeMCU-32-S2-Kit
NodeMCU-32-S2-Kit

ESP32-S2 WiFi Development Board, Based On ESP-12K Module
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Overview

This is an entry-level development board based on Espressif ESP32-S2 SoC, which is is equipped with Xtensa® 32-bit LX7 single-core processor, operating frequency up to 240 MHz, supports secondary development without using other microcontrollers or processors.

The ESP32-S2 has industry-leading low-power performance and RF performance, supports IEEE802.11b / g / n protocol, integrates Wi-Fi MAC, Wi-Fi RF and baseband, RF switch, RF Balun, power amplifier, low noise Amplifier, etc, designed for various applications such as internet of things (IoT), mobile devices, wearable electronics, smart home, etc.

  • Onboard ESP-12K module that comes with a PCB antenna
  • Onboard CH340, USB to UART converter
  • USB port for power input, firmware programming, or UART debugging
  • 2x21pin extension headers, breakout all the I/O pins of the module
  • 2x keys, used as reset or user-defined

Features

  • Complete Wi-Fi 802.11b/g/n, data rate up to 150Mbps
  • Built-in ESP32-S2 chip, Xtensa® single-core 32-bit LX7 microprocessor, support up to 240 MHz clock frequency, with 128KB ROM, 320KB SRAM, 16KB RTC SRAM
  • Support UART/GPIO/PWM/ADC/I2C
  • Integrate Wi-Fi MAC/ BB/RF/PA/LNA
  • Support multiple sleep modes, deep sleep current is less than10uA
  • Built-in Lwip protocol stack
  • Support STA/AP/STA+AP work mode
  • Smart Config (APP) / AirKiss (WeChat) one-click distribution network supporting Android and IOS
  • Support serial local upgrade and remote firmware upgrade (FOTA)
  • General AT command can be used quickly
  • Support secondary development, integrated Windows, Linux development environment

Specifications

  • Dimensions: 59.05mm x 25.50mm
  • Package: DIP-42 (2.54mm pitch standard pin header)
  • Antenna: PCB antenna OR IPEX connector
  • WiFi frequency range: 2400~2483.5MHz
  • Operating temperature: -40℃ ~ 85 ℃
  • Storage condition: -40 ℃ ~ 125 ℃, < 90%RH
  • Power supply
    • Micro USB supply voltage 4.75V~5.25V, 5.0V recommended;
    • Pin header supply voltage 3.0V ~ 3.6V, supply current > 500mA, 3.3V recommended
  • Serial port data rate: support 110 ~ 4608000 bps, 115200 bps by default
  • WiFi security: WEP/WPA-PSK/WPA2-PSK
  • SPI Flash: default 32Mbit (i.e. 4MByte)
  • PSRAM: 8MByte PSRAM

Dimensions

NodeMCU-32-S2-Kit-size.jpg

Resources

Driver

CH340 Windows Driver

Other references

【Note: The following use reference links are only in Chinese for the time being. For the convenience of reading, it is recommended to use google translation】

① Compare ESP32S2 and ESP32 development methods, and take you to get started with environment construction
② ESP-12K is directly connected to Apple's smart home HomeKit platform, easy voice Siri control
③ Ai-Thinker drive the WS2812B light board with ESP-12K to achieve colorful lighting effects
④ In the smart home lighting industry, how to understand PWM smooth dimming?