JetBot AI Kit Assemble Manual

From Waveshare Wiki
Revision as of 11:06, 27 July 2019 by Waveshare-eng11 (talk | contribs) (Created page with "==JetBot AI Kit Assembly== ;Components and screws :Please check the components and screws :File:Jetbot_assemble_manual_1.png ;1. Assemble motors :File:assemble-1.png ;...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

JetBot AI Kit Assembly

Components and screws
Please check the components and screws
Jetbot assemble manual 1.png
1. Assemble motors
Assemble-1.png
2. Assemble the antennas
Assemble-2.png
3. Mounting the Camera holder to metail box
Assemble-3.png
4. Set standoffs on metal box for assembling JetBot expansion board
Assemble-4.png
5. Set standoffs on jetbot expansion board for assembling jetson nano developer kit
Assemble-5.png
6. Assemble Jetbot expansion board, adjust place of antennas
Assemble-6.png
Connect motors to jetbot expansion board, connect left motor to the left interface, and right to the right
Assemble-10.png
7. Mounting 18650 batteries to batteries holder, note that you should recognize direction of batteries according to the white screen silk printing.
Assemble-7.png
8. Turn out screws from Omni-direction wheels, then fixing the wheels to metal bottom board
Assemble-8.png
9. Assemble metal box
Assemble-9.png
10. Assemble wheels
Assemble-11.png
11. Assemble camera, don't forget the set the Acrylic piece between holder and camera
Assemble-12.png
12. Take out the jetson nano board, and assemble wireless-AC 8265
Assemble-13.png
13. Connect antennas
Assemble-14.png
14. Finally, connect the 8PIN cable according to screen silk printing.
Assemble-15.png