Difference between revisions of "JetBot AI Kit"
From Waveshare Wiki
Line 32: | Line 32: | ||
*Start Jetson nano again. After booting, Ubuntu will auto-connect WIFI, IP address is also displayed on OLED | *Start Jetson nano again. After booting, Ubuntu will auto-connect WIFI, IP address is also displayed on OLED | ||
;Step 4. Access JetBot via Web | ;Step 4. Access JetBot via Web | ||
+ | *After networking. You can remove peripherals and power adapter. | ||
+ | *Turn Power switch of Jetbot into On | ||
==Supports== | ==Supports== | ||
{{Service00}} | {{Service00}} |
Revision as of 01:24, 19 July 2019
| ||
Instruction
This is a AI Robot kit based on Jetson Nano Developer Kit. Supports facial recognition, object tracking, auto line following or collision advancing and so on.
User Guides
1. Install Image
- Step 1. Write JetBot image to SD card
- You need to prepare a SD card which should be at least 64G
- Download JetBot image which is provided by NVIDIA and unzip it. Click here to download it
- Connect the SD card to PC via card reader
- User Etcher software to write image (unzip above) to SD card.Click here to download Etcher software
- After writting, eject the SD card
- Step 2. Start up Jetson Nano Developer Kit
- Insert SD card to SD card slot of Jetson nano (slot is under Jetson Nano board)
- Connect HDMI display (if you don't have HDMI or DP display and want to buy one, recommend our HDMI display), keyboard and Mouse to Jetson Nano Developer Kit
【Note】You had better test the Jetson Nano Developer Kit before you assemble JetBot
- Step 3. Connect Jetbot to WIFI
All the examples use WIFI, we need to connect JetBot to WIFI firstly.
- Start Jetson nano Developer Kit, default user name and password of Jetbot are both jetbot
- Click Network icon on top-right of Desktop and connect WIFI
- Power off. Then assemble Jetbot
- Start Jetson nano again. After booting, Ubuntu will auto-connect WIFI, IP address is also displayed on OLED
- Step 4. Access JetBot via Web
- After networking. You can remove peripherals and power adapter.
- Turn Power switch of Jetbot into On
Supports
Support
If you require technical support, please go to the Support page and open a ticket.