Difference between revisions of "IMX219-77 Camera"
From Waveshare Wiki
Line 22: | Line 22: | ||
*Power on Jetson Nano and open the Terminal (Ctrl+ALT+T) | *Power on Jetson Nano and open the Terminal (Ctrl+ALT+T) | ||
*Test camera with command: | *Test camera with command: | ||
− | DISPLAY=:0.0 gst-launch-1.0 nvarguscamerasrc ! | + | DISPLAY=:0.0 gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM), width=1920, height=1080, format=(string)NV12, framerate=(fraction)30/1' ! nvoverlaysink -e |
==Resources== | ==Resources== |
Revision as of 03:49, 14 June 2019
| ||
Introduction
IMX219 Camera, 800 megapixels and 77 FOV. Compatible with Jetson nano
More |
Hardware connection
- Connect the camera to CSI interface of Jetson Nano.Set the metal side of FFC into Heat-sink
- Connect a HDMI LCD to Jetson Nano
- Power on Jetson Nano and open the Terminal (Ctrl+ALT+T)
- Test camera with command:
DISPLAY=:0.0 gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM), width=1920, height=1080, format=(string)NV12, framerate=(fraction)30/1' ! nvoverlaysink -e
Resources
Related resources
FAQ
Support
Support
If you require technical support, please go to the Support page and open a ticket.