IMX219-200 Camera

From Waveshare Wiki
Revision as of 06:11, 26 June 2019 by Waveshare-eng11 (Talk | contribs)

Jump to: navigation, search
IMX219-200 Camera
IMX219-200 Camera

IMX219 sensor, FOV 200, compatible with jetson nano




Primary Attribute
Category: Modules, Cameras
{{{userDefinedInfo}}}: {{{userdefinedvalue}}}
Brand: Waveshare
English: Website
Chinese: 网站
Onboard Interfaces
Related Products


IMX219 Camera, 800 megapixels and 200 FOV. Compatible with Jetson nano


Hardware connection

  • Connect the camera to CSI interface of Jetson Nano.Set the metal side of FFC into Heat-sink
  • Connect a HDMI LCD to Jetson Nano

Software setting

  • Power on Jetson Nano and open the Terminal (Ctrl+ALT+T)
  • Test camera with command:
DISPLAY=:0.0 gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM), width=3280, height=2464, format=(string)NV12, framerate=(fraction)20/1' ! nvoverlaysink -e
  • If you find that the image captured is red. You can try to download .isp file and installed:
tar zxvf Camera_overrides.tar.gz 
sudo cp camera_overrides.isp /var/nvidia/nvcam/settings/
sudo chmod 664 /var/nvidia/nvcam/settings/camera_overrides.isp
sudo chown root:root /var/nvidia/nvcam/settings/camera_overrides.isp

Selection Guide

Product Pixels Sensor Dual Len Infrared Angle of View (Diagonal)(degree) Afterture (F) Focal Length (MM) PCBA Suit for
RPi Camera 8 Mega IMX219 × × 62.2 2.0 3.04 Raspberry Pi, Jetson Nano
RPi NoIR Camera V2 62.2 2.0 3.04 Raspberry Pi, Jetson Nano
IMX219-77 Camera × 77 2.0 2.96 Jetson Nano, CM3/3+
IMX219-77IR 77 2.0 2.96 Jetson Nano, CM3/3+
IMX219-120 Camera × 120 2.2 1.88 Jetson Nano, CM3/3+
IMX219-160 Camera × 160 2.35 3.15 Jetson Nano, CM3/3+
IMX219-160IR Camera 160 2.35 3.15 Jetson Nano, CM3/3+
IMX219-170 Camera × 170 2.0 0.87 Jetson Nano, CM3/3+
IMX219-200 Camera × 200 2.0 3.15 Jetson Nano, CM3/3+
IMX219-D160 × 160 2.35 3.15 × Raspberry Pi, Jetson Nano
[IMX219-83 Stereo Camera] × 83 NA 2.6 Jetson Nano, CM3/3+


Related resources



Mail.png Contact your seller (fast response and most recommended)

or send emails to [email protected] (not fast enough but please be patient) for help.

Our working time: 09:00-18:00 (UTC+8 Monday to Saturday)