ICE Tower Fan for Pi

From Waveshare Wiki
Revision as of 10:17, 4 January 2020 by Waveshare-eng11 (talk | contribs)
Jump to: navigation, search
ICE Tower Fan for Pi
ICE Tower Fan for Pi

ICE Tower CPU Cooling Fan for Raspberry Pi 4 & 3, Super Heat Dissipation
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Assembly

1
Ice-tower-fan-for-pi-2.jpg
2
Ice-tower-fan-for-pi-3.jpg
3
Ice-tower-fan-for-pi-4.jpg
4
Ice-tower-fan-for-pi-5.jpg
5
Ice-tower-fan-for-pi-6.jpg
6
Ice-tower-fan-for-pi-7.jpg

Raspberry Pi 4B/3B+/3B

  • 1. Fix the steel mounting fixer to radiator's heat dissipation cube by M2.0 screws
  • 2. Fix the steel mounting fixer to Raspberry Pi’s mounting hole by M2.5 standoffs, and please make sure the heat dissipation is in contact with the CPU shield properly.
  • 3. Fix the copper stick to Raspberry Pi with M2.5 nuts.
  • 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.


Package Include

  • ICE Tower Fan for Pi x1

ICE-Tower-Fan-for-Pi-pack.jpg

PS: Product does not contain thermal silicone grease, but if you have thermal silicone the dispassion effect will be better.

Customer Review

FAQ

  • Q: Can it be installed to my retroflag case?
 A: No, the dimension is too big. 
  • Q: How many degrees can be decreased?
 A: We've tested it at room temperature 25℃, it can decrease about 40℃.
  • Q: Does it easy to assemble?
 A: Yes, it is very easy to install, we've provided an instruction for you.