Difference between revisions of "ICE Tower Fan for Pi"
From Waveshare Wiki
Line 11: | Line 11: | ||
|[[File:ice-tower-fan-for-pi-7.jpg|none|320px]] | |[[File:ice-tower-fan-for-pi-7.jpg|none|320px]] | ||
|} | |} | ||
− | ===Raspberry Pi 3B+=== | + | ===Raspberry Pi 4B/3B+/3B=== |
* 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws | * 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws | ||
− | * 2. Fixed the steel mounting fixer to Raspberry | + | * 2. Fixed the steel mounting fixer to Raspberry Pi’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly. |
− | |||
− | |||
− | |||
− | |||
− | |||
* 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts. | * 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts. | ||
* 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin. | * 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin. | ||
+ | |||
==Package Include== | ==Package Include== |
Revision as of 12:44, 28 November 2019
How to assemble
Raspberry Pi 4B/3B+/3B
- 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
- 2. Fixed the steel mounting fixer to Raspberry Pi’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
- 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
- 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.
Package Include
- ICE Tower Fan for Pi x1
PS: Product does not contain thermal silicone grease, but if you have thermal silicone the dispassion effect will be better.
Customer Review
- YOUTUBE URL:
FAQ
- Q: Can it be install to my retroflag case?
A: No, the dimension is too big.
- Q: How many degrees can be decreased ?
A: We've tested it at room temperature 25℃, it can decreased about 40℃.
- Q: Does it easy to assemble?
A: Yes, it is very easy to install, we've provided an instruction for you.