Difference between revisions of "ICE Tower Fan for Pi"

From Waveshare Wiki
Jump to: navigation, search
(Package Include)
Line 11: Line 11:
 
|[[File:ice-tower-fan-for-pi-7.jpg|none|320px]]
 
|[[File:ice-tower-fan-for-pi-7.jpg|none|320px]]
 
|}
 
|}
===Raspberry Pi 3B+===
+
===Raspberry Pi 4B/3B+/3B===
 
* 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
 
* 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
* 2. Fixed the steel mounting fixer to Raspberry Pi 3B+’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
+
* 2. Fixed the steel mounting fixer to Raspberry Pi’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
* 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
+
* 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.
+
===Raspberry Pi 4B===
+
* 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
+
* 2. Fixed the steel mounting fixer to Raspberry Pi 4B’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
+
 
* 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
 
* 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
 
* 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.
 
* 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.
 +
  
 
==Package Include==
 
==Package Include==

Revision as of 12:44, 28 November 2019

How to assemble

Ice-tower-fan-for-pi-2.jpg
Ice-tower-fan-for-pi-3.jpg
Ice-tower-fan-for-pi-4.jpg
Ice-tower-fan-for-pi-5.jpg
Ice-tower-fan-for-pi-6.jpg
Ice-tower-fan-for-pi-7.jpg

Raspberry Pi 4B/3B+/3B

  • 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
  • 2. Fixed the steel mounting fixer to Raspberry Pi’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
  • 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
  • 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.


Package Include

  • ICE Tower Fan for Pi x1

ICE-Tower-Fan-for-Pi-pack.jpg

PS: Product does not contain thermal silicone grease, but if you have thermal silicone the dispassion effect will be better.

Customer Review

FAQ

  • Q: Can it be install to my retroflag case?
 A: No, the dimension is too big. 
  • Q: How many degrees can be decreased ?
 A: We've tested it at room temperature 25℃, it can decreased about 40℃.
  • Q: Does it easy to assemble?
 A: Yes, it is very easy to install, we've provided an instruction for you.