Difference between revisions of "ICE Tower Fan for Pi"

From Waveshare Wiki
Jump to: navigation, search
(How to assemble)
(Package Include)
Line 23: Line 23:
  
 
==Package Include==
 
==Package Include==
* 1 x Ice Tower radiator and Fan
+
* ICE Tower Fan for Pi x1
* 2 x Steel Mounting brackets
+
[[File:ICE-Tower-Fan-for-Pi-pack.jpg|500px]]
* 8 x M2.5x6 Copper sticks
+
* 4 x M2.5 Nuts
+
* 6 x M2.5x4 screws
+
* 3 x Thermal Tape
+
* 1 x Screw Driver
+
* 1 x Protective Acrylic Panel
+
[[File:塔式风扇-新2.jpg|left|500px]]
+
 
<br style="clear:both;">
 
<br style="clear:both;">
 
<font color=red><pre>PS: Product does not contain thermal silicone grease, but if you have thermal silicone the dispassion effect will be better.</pre></font>
 
<font color=red><pre>PS: Product does not contain thermal silicone grease, but if you have thermal silicone the dispassion effect will be better.</pre></font>

Revision as of 12:42, 28 November 2019

How to assemble

Ice-tower-fan-for-pi-2.jpg
Ice-tower-fan-for-pi-3.jpg
Ice-tower-fan-for-pi-4.jpg
Ice-tower-fan-for-pi-5.jpg
Ice-tower-fan-for-pi-6.jpg
Ice-tower-fan-for-pi-7.jpg

Raspberry Pi 3B+

  • 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
  • 2. Fixed the steel mounting fixer to Raspberry Pi 3B+’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
  • 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
  • 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.

Raspberry Pi 4B

  • 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
  • 2. Fixed the steel mounting fixer to Raspberry Pi 4B’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
  • 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
  • 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.

Package Include

  • ICE Tower Fan for Pi x1

ICE-Tower-Fan-for-Pi-pack.jpg

PS: Product does not contain thermal silicone grease, but if you have thermal silicone the dispassion effect will be better.

Customer Review

FAQ

  • Q: Can it be install to my retroflag case?
 A: No, the dimension is too big. 
  • Q: How many degrees can be decreased ?
 A: We've tested it at room temperature 25℃, it can decreased about 40℃.
  • Q: Does it easy to assemble?
 A: Yes, it is very easy to install, we've provided an instruction for you.