Difference between revisions of "ICE Tower Fan for Pi"

From Waveshare Wiki
Jump to: navigation, search
(How to assemble)
Line 1: Line 1:
 
==How to assemble==
 
==How to assemble==
 
{|
 
{|
|[[File:Rpi3bthermaltape.png|left|320px]]
+
|[[File:ice-tower-fan-for-pi-2.jpg|left|320px]]
|[[File:Icetowerassemble05.jpg|none|320px]]
+
|[[File:ice-tower-fan-for-pi-3.jpg|none|320px]]
|[[File:Icetowerassemble03.jpg|none|320px]]
+
|[[File:ice-tower-fan-for-pi-4.jpg|none|320px]]
  
 
|}
 
|}
 
{|
 
{|
|[[File:Icetowerassemble02.jpg|left|320px]]
+
|[[File:ice-tower-fan-for-pi-5.jpg|left|320px]]
|[[File:Icetowerassemble01.jpg|none|320px]]
+
|[[File:ice-tower-fan-for-pi-6.jpg|none|320px]]
|[[File:塔式风扇--3.jpg|none|320px]]
+
|[[File:ice-tower-fan-for-pi-7.jpg|none|320px]]
 
|}
 
|}
 
===Raspberry Pi 3B+===
 
===Raspberry Pi 3B+===

Revision as of 12:41, 28 November 2019

How to assemble

Ice-tower-fan-for-pi-2.jpg
Ice-tower-fan-for-pi-3.jpg
Ice-tower-fan-for-pi-4.jpg
Ice-tower-fan-for-pi-5.jpg
Ice-tower-fan-for-pi-6.jpg
Ice-tower-fan-for-pi-7.jpg

Raspberry Pi 3B+

  • 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
  • 2. Fixed the steel mounting fixer to Raspberry Pi 3B+’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
  • 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
  • 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.

Raspberry Pi 4B

  • 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
  • 2. Fixed the steel mounting fixer to Raspberry Pi 4B’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
  • 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
  • 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.

Package Include

  • 1 x Ice Tower radiator and Fan
  • 2 x Steel Mounting brackets
  • 8 x M2.5x6 Copper sticks
  • 4 x M2.5 Nuts
  • 6 x M2.5x4 screws
  • 3 x Thermal Tape
  • 1 x Screw Driver
  • 1 x Protective Acrylic Panel


PS: Product does not contain thermal silicone grease, but if you have thermal silicone the dispassion effect will be better.

Customer Review

FAQ

  • Q: Can it be install to my retroflag case?
 A: No, the dimension is too big. 
  • Q: How many degrees can be decreased ?
 A: We've tested it at room temperature 25℃, it can decreased about 40℃.
  • Q: Does it easy to assemble?
 A: Yes, it is very easy to install, we've provided an instruction for you.