HDMI to CSI Adapter

HDMI to CSI Adapter HDMI To CSI Adapter For Raspberry Pi Series, 1080p@30fps Support

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute Category: Raspberry Pi {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: Website Chinese: 微雪电子

Onboard Interfaces

Related Products

Overview

This is an HDMI to CSI camera port adapter designed for Raspberry Pi with up to 1080p@30fps support from HDMI input, backward compatible. It allows you to use HDMI cameras just as the standard Raspberry Pi CSI cameras, all versions of Raspberry Pi series boards are supported.

Connection

Connect the FPC cable of Raspberry Pi to the CSI interface of Raspberry Pi. The CSI interface of Pi 2B, 3B, 3B+ located between the LAN port and HDMI port. The CSI interface of Pi 4 is placed between the HDMI1 interface and the audio jack. If you use Pi zero, the CSI interface is beside the Power port. Here is the diagram of Pi 4. 4B

Note that the silver side (metal side) should toward to the HDMI interface. Release the black buckle, align the FPC cable and insert it tightly, then close the black buckle.

2. Enable Camera

The camera interface of Raspberry Pi is default disabled. Before you use camera, you should enable it.
Open Raspberry Pi terminal and excute command sudo raspi-config, then choose Interfacing Options -> Camera -> Yes
  

  

Reboot Raspberry Pi

sudo reboot

3. Test

Open a terminal and test the adapter

Capture：sudo raspistill -o image-01.jpg

Record：sudo raspivid -o video-01.h264 -t 10000

Support

If you require technical support, please go to the Support page and open a ticket.