Difference between revisions of "Game HAT"

From Waveshare Wiki
Jump to: navigation, search
(2 intermediate revisions by the same user not shown)
Line 20: Line 20:
 
== Resources ==
 
== Resources ==
 
*[https://www.waveshare.com/w/upload/2/22/Game_HAT_user_manual_en.pdf User Manual]
 
*[https://www.waveshare.com/w/upload/2/22/Game_HAT_user_manual_en.pdf User Manual]
 +
*[https://www.waveshare.com/w/upload/c/c7/Setting_for_recalbox.pdf Setting for recalbox]
 
===Images===
 
===Images===
*[https://drive.google.com/open?id=1D08leiE1rAzlbdEb0-pBvw3kRFnxS5C9 Image for Pi zero/zero W]
+
*[https://drive.google.com/open?id=1CtcWXs89OkOf4OTTXDAcCgyPLG5MR2AU Retropie for Pi 2/3B/3B+]
*[https://drive.google.com/open?id=1alJePNBE_6SeOuvbvhOmbUbPdDOlxASZ Image for Pi 2/3B/3B+]
+
*[https://drive.google.com/open?id=1htOTq5SC_-IY8a2eeRIxxo19_e-UrE45 Retropie for Pi zero]
 
+
<!--
 +
*[https://drive.google.com/open?id=1dBZ_jZMF_Iz0vrik_wnkIQdSewDm8bcr Recalbox for Pi 3/3B+]
 +
*[https://drive.google.com/open?id=1jC_INqlZ2cZ940THisQUIUCeYpQx4agw Recalbox for Pi zero]
 +
-->
 
===Driver===
 
===Driver===
 
*[[:File:Game-HAT-180720.tar.gz|Driver]]
 
*[[:File:Game-HAT-180720.tar.gz|Driver]]
 +
===3D Drawing===
 +
*[https://www.waveshare.com/w/upload/9/90/Game-hat-3D-drawing.7z Game HAT 3D Drawing]
  
 
== Support ==
 
== Support ==

Revision as of 07:54, 13 May 2019

Game HAT
Game-HAT-3.jpg

Game HAT for Raspberry Pi, make your own game console
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Note

Please focus on the direction of battery, if you reversely connecting the battery, the charging circuit will be damaged, so please pay attention to it when you mounting the battery.

FAQ

 Answer:
The battery could last for about 1~2 hours, according to the game you play. This HAT supports charging and playing, note that Raspberry Pi will auto reboot if you disconnect USB cable after charging.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
We recommend you to use 5V/2A power adapter for charging,and please use high quantity adapter. If the instantaneous voltage higher than 7V, it will damage the charge circuit on board.
{{{3}}}
{{{4}}}

{{{5}}}


Resources

Images

Driver

3D Drawing

Support

Support

If you require technical support, please go to the Support page and open a ticket.