Difference between revisions of "GamePi43"

From Waveshare Wiki
Jump to: navigation, search
 
(18 intermediate revisions by 3 users not shown)
Line 9: Line 9:
 
|related={{Product List|Game Machines/Portable Game Machines/Raspberry Pi Based}}
 
|related={{Product List|Game Machines/Portable Game Machines/Raspberry Pi Based}}
 
}}
 
}}
 +
=Overview=
 
==Notice==
 
==Notice==
<font color=red>Please take care of the direction of poles when mounting the batteries. It may damage the charge circuit if you reverse the batteries. And please use the same types of batteries, different types/brands of batteries may cause charging issue.</font>
+
<font color=red>Please take care of the direction of the poles when mounting the batteries. It may damage the charge circuit if you reverse the batteries. And please use the same types of batteries, different types/brands of batteries may cause charging issues.</font>
 
<!--
 
<!--
 
==Overview==
 
==Overview==
The GamePi43 is a portable retro video game console based on Raspberry Pi 3B+ with a 4.3inch IPS display, 800 x 480 pixels.-->
+
The GamePi43 is a portable retro video game console based on Raspberry Pi 3B+ with a 4.3-inch IPS display, 800 x 480 pixels.-->
 
==Features==
 
==Features==
 
*Raspberry Pi controller, available options:
 
*Raspberry Pi controller, available options:
Line 20: Line 21:
 
*60 fps smooth gaming experience.
 
*60 fps smooth gaming experience.
 
*Compatible with Raspberry Pi A+/B+/2B/3B/3B+4B (external HDMI adapter is required for Pi Zero/Zero W/Zerao WH).
 
*Compatible with Raspberry Pi A+/B+/2B/3B/3B+4B (external HDMI adapter is required for Pi Zero/Zero W/Zerao WH).
*Integrates battery charge circuitry, powered from 18650 lithium batteries (NOT included), plays anywhere anytime.
+
*Integrates battery charge circuitry, powered from 18650 lithium batteries <font color="#FF0000">(NOT included)</font>, plays anywhere anytime.
 
*Battery life indicator.
 
*Battery life indicator.
 
*Onboard speaker and earphone jack, listen to the familiar BGM from the old days.
 
*Onboard speaker and earphone jack, listen to the familiar BGM from the old days.
Line 29: Line 30:
  
 
==User Guides==
 
==User Guides==
<!--<font color=red>【Note】Please make sure you mount the batteries in the correct direction, otherwise it may damage charging circuity</font>-->
+
<!--<font color=red>Please make sure you mount the batteries in the correct direction, otherwise it may damage charging circuity</font>-->
 
===Hardware connection===
 
===Hardware connection===
 
# Insert the GPIO of Raspberry Pi into GamePi43.
 
# Insert the GPIO of Raspberry Pi into GamePi43.
# Connect the HDMI port of GamePi43 to Raspberry Pi by HDMI connector.
+
# Connect to the HDMI port. Connect the HDMI connector to the HDMI interface of the screen and the board.
 
#*If you use Raspberry Pi Zero/Raspberry Pi Zero W, you should use an HDMI cable.
 
#*If you use Raspberry Pi Zero/Raspberry Pi Zero W, you should use an HDMI cable.
 
# Turn the power switch to OFF and mount 18650 batteries.
 
# Turn the power switch to OFF and mount 18650 batteries.
Line 38: Line 39:
  
 
===Method 1: Use pre-configured Image===
 
===Method 1: Use pre-configured Image===
1) The image of the pre-installed driver is provided here, decompress and write the image to the TF card (open the [https://www.waveshare.com/w/upload/7/76/Win32DiskImager.zip Win32DiskImager.exe], select the .img file, and click "write" to program the image).
+
1) The image of the pre-installed driver is provided here, decompress and write the image to the TF card (open the [https://files.waveshare.com/upload/7/76/Win32DiskImager.zip Win32DiskImager.exe], select the .img file, and click "write" to program the image).
 
{|class="wikitable"
 
{|class="wikitable"
 
!OS!!Revision!!Raspberry Pi!!User name/Password!!Link
 
!OS!!Revision!!Raspberry Pi!!User name/Password!!Link
Line 54: Line 55:
 
|Recalbox||6.0-DragonBlaze||Raspberry Pi 1/Zero/Zero W||root / recalboxroot|| [https://drive.google.com/open?id=1StNzCJNpxCJ4EuKdKECIiIlHNr_yKyq_ Google Drive]
 
|Recalbox||6.0-DragonBlaze||Raspberry Pi 1/Zero/Zero W||root / recalboxroot|| [https://drive.google.com/open?id=1StNzCJNpxCJ4EuKdKECIiIlHNr_yKyq_ Google Drive]
 
|-
 
|-
|Recalbox||7.1-DragonBlaze||Raspberry Pi 2/3/Pi 3B+||root / recalboxroot ||[https://1drv.ms/u/s!At1XVmt1PVrlgSxpYsVENSf-vD4E?e=niX25Z One Drive]
+
|Recalbox||7.1-DragonBlaze||Raspberry Pi 2/3/Pi 3B+||root / recalboxroot ||[https://drive.google.com/file/d/1kA6CELIo5-jH6kG5Foc6p9l78o-Oa31c/view?usp=share_link Google Drive]
 
|-
 
|-
|Recalbox||7.1-DragonBlaze||Raspberry Pi 4||root / recalboxroot ||[https://1drv.ms/u/s!At1XVmt1PVrlgS100gDtSlL7q7wF?e=1zhdUQ One Drive]
+
|Recalbox||7.1-DragonBlaze||Raspberry Pi 4||root / recalboxroot ||[https://drive.google.com/file/d/1aO4HRnTlF2tGsNdUcWgQV9f2J5Iy1ssL/view?usp=share_link Google Drive]
 
|}
 
|}
  
Line 63: Line 64:
 
#If batteries are enough, the LED of GamePi43 will prompt the current battery level and start the system.
 
#If batteries are enough, the LED of GamePi43 will prompt the current battery level and start the system.
  
3) After booting, you can select emulators. In Retropie, button "A" is OK, and "B" is the return. In Recalbox, button "B" is OK and "A" is the return.
+
3) After booting, you can select emulators. In Retropie, button "A" is OK, and "B" is the return. In Recalbox, button "B" is OK, and "A" is the return.
  
 
4) You can press "Start" to start games.
 
4) You can press "Start" to start games.
  
5) If you want to exit games, press "HK" and "Select"  or "Select" and "Start" at the same time.
+
5) If you want to exit games, press "HK" + "Select"  or "Select" + "Start" at the same time.
  
 
6) To adjust the volume and backlight of the LCD, you can use the buttons on the bottom of GamePi43.
 
6) To adjust the volume and backlight of the LCD, you can use the buttons on the bottom of GamePi43.
Line 73: Line 74:
 
===Method 2: Install driver manually===
 
===Method 2: Install driver manually===
 
===='''Install Driver on Retropie'''====
 
===='''Install Driver on Retropie'''====
<!--*Download the driver of GamePi43: [https://www.waveshare.com/w/upload/6/6a/GamePi43-210127.tar.gz GamePi43-210127 Driver-Support Retropie-v4.7]-->
+
<!--*Download the driver of GamePi43: [https://files.waveshare.com/upload/6/6a/GamePi43-210127.tar.gz GamePi43-210127 Driver-Support Retropie-v4.7]-->
 
Download the Retropie image from [https://retropie.org.uk/download/ Retropie website].<br/>
 
Download the Retropie image from [https://retropie.org.uk/download/ Retropie website].<br/>
  
Line 80: Line 81:
 
1) Download the image file to the computer and unzip it to get the .img file.<br/>
 
1) Download the image file to the computer and unzip it to get the .img file.<br/>
  
2) Connect the TF card to the computer, open the [https://www.waveshare.com/w/upload/7/76/Win32DiskImager.zip Win32DiskImager.exe], select the .img file prepared in step 1, and click write to program the image.<br/>
+
2) Connect the TF card to the computer, open the [https://files.waveshare.com/upload/7/76/Win32DiskImager.zip Win32DiskImager.exe], select the .img file prepared in step 1, and click write to program the image.<br/>
  
 
3) After the programming is completed, use WordPad to open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt, save and eject the TF card safely.<br/>
 
3) After the programming is completed, use WordPad to open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt, save and eject the TF card safely.<br/>
Line 90: Line 91:
 
hdmi_cvt 800 480 60 6 0 0 0
 
hdmi_cvt 800 480 60 6 0 0 0
 
</syntaxhighlight>
 
</syntaxhighlight>
4) Connect the TF card and USB keyboard to the Raspberry Pi, turn on the power switch, start the Raspberry Pi, enter the system and press F4 on the keyboard to enter the terminal.<br/>
+
4) Connect the TF card and USB keyboard to the Raspberry Pi, turn on the power switch, start the Raspberry Pi, enter the system, and press F4 on the keyboard to enter the terminal.<br/>
  
 
5) After entering the terminal, there are two ways to install the driver, and you can choose one of them to install.
 
5) After entering the terminal, there are two ways to install the driver, and you can choose one of them to install.
Line 103: Line 104:
 
Select the Manage Packages option in the following interface, and then press "Enter".
 
Select the Manage Packages option in the following interface, and then press "Enter".
 
:[[File:GamePi43 driver01.png|800px]]
 
:[[File:GamePi43 driver01.png|800px]]
After entering the following interface, select the Manage driver Packages option and press "Enter".
+
After entering the following interface, select the Manage Driver Packages option and press "Enter".
 
:[[File:GamePi43 driver02.png|800px]]
 
:[[File:GamePi43 driver02.png|800px]]
 
Select mkarcadejoystick in the following interface and press "Enter".
 
Select mkarcadejoystick in the following interface and press "Enter".
 
:[[File:GamePi43 driver03.png |800px]]
 
:[[File:GamePi43 driver03.png |800px]]
After entering the next interface, select install from the source. After the driver is installed, Ctrl+C can exit the RetroPie-Setup configuration interface.
+
After entering the next interface, select Install from the source. After the driver is installed, Ctrl+C can exit the RetroPie-Setup configuration interface.
  
 
Then enter the following command in the terminal to modify the configuration.
 
Then enter the following command in the terminal to modify the configuration.
Line 118: Line 119:
  
 
*Method 2: Use the driver provided by us and install it in the following way.
 
*Method 2: Use the driver provided by us and install it in the following way.
Download driver of GamePi43: [https://www.waveshare.com/w/upload/6/6a/GamePi43-210127.tar.gz GamePi43-210127 Driver-Support Retropie-v4.7]<br/>
+
Download driver of GamePi43: [https://files.waveshare.com/upload/6/6a/GamePi43-210127.tar.gz GamePi43-210127 Driver-Support Retropie-v4.7]<br/>
Download the GamePi43 driver and copy it to the /boot directory of the TF card (you can also use a USB flash drive or network to copy the driver file to the RetroPie system), and perform the following operations:
+
Download the GamePi43 driver and copy it to the /boot directory of the TF card (you can also use a USB flash drive or network to copy the driver file to the RetroPie system), and perform the following operations:<br/>
After opening the folder where the driver is located.
+
Opening the folder where the driver is located.
 
<pre>
 
<pre>
 
tar xzvf /boot/GamePi43-210127.tar.gz
 
tar xzvf /boot/GamePi43-210127.tar.gz
Line 134: Line 135:
 
#Press "A" to save the configuration and configure the interface.
 
#Press "A" to save the configuration and configure the interface.
 
#Press the "B" or "Start" key to abandon the configuration and exit the configuration interface.
 
#Press the "B" or "Start" key to abandon the configuration and exit the configuration interface.
 +
After that, you can play the game normally.
  
 
===='''Install Driver On Recalbox'''====
 
===='''Install Driver On Recalbox'''====
Line 143: Line 145:
 
1) Unzip the files download to get the .img file<br/>
 
1) Unzip the files download to get the .img file<br/>
  
2)Connect the TF card to the computer, open the [https://www.waveshare.com/w/upload/7/76/Win32DiskImager.zip Win32DiskImager.exe], select the .img file prepared in step 1, and click write to burn the image.<br/>
+
2)Connect the TF card to the computer, open the [https://files.waveshare.com/upload/7/76/Win32DiskImager.zip Win32DiskImager.exe], select the .img file prepared in step 1, and click "write" to program the image.<br/>
  
 
3) After the programming is completed, copy the GamePi43 driver to the root directory of the TF card (you can also use a USB flash drive or network to copy the driver file to the mirrored file system).<br/>
 
3) After the programming is completed, copy the GamePi43 driver to the root directory of the TF card (you can also use a USB flash drive or network to copy the driver file to the mirrored file system).<br/>
Line 169: Line 171:
 
nano /recalbox/share/system/recalbox.conf
 
nano /recalbox/share/system/recalbox.conf
 
</syntaxhighlight>
 
</syntaxhighlight>
Modify the line controllers.gpio.enabled=0 in the file to
+
Modify the line "controllers.gpio.enabled=0" in the file to
 
<syntaxhighlight lang="c">
 
<syntaxhighlight lang="c">
 
controllers.gpio.enabled=1
 
controllers.gpio.enabled=1
Line 175: Line 177:
 
After modification, save the file and exit the editing. After entering reboot to restart the system, you can use the buttons normally.
 
After modification, save the file and exit the editing. After entering reboot to restart the system, you can use the buttons normally.
  
<!--
 
 
==Add new games==
 
==Add new games==
 
Maybe the default games in the test image are not those you want, you can also add games as you like.
 
Maybe the default games in the test image are not those you want, you can also add games as you like.
*Usually games take up a lot of memory. so we need to expand the filesystem first. Choose RASPI-CONFIG on configure page and press enter.
+
*Usually games take up a lot of memory. so we need to expand the filesystem first. Choose RASPI-CONFIG on the configure page and press enter.
 
[[File:600px-Game-HAT-Manual03.jpg]]
 
[[File:600px-Game-HAT-Manual03.jpg]]
  
Line 186: Line 187:
 
[[File:600px-Game-HAT-Manual05.jpg]]
 
[[File:600px-Game-HAT-Manual05.jpg]]
 
*Choose OK, and reboot.
 
*Choose OK, and reboot.
*Download ROMS of games you like
+
 
 +
2) Prepare the game ROMs.<br/>
 +
Here is a very cool recommended website: http://coolrom.com/<br/>
 +
You can download various game ROMs on it through your PC. For example, if we want to play Sony Playstation games, we can choose.<br/>
 +
[[File: Game-HAT-Manual06.png]]<br/>
 +
Just find the game you want to play inside and download it. For example: http://coolrom.com/roms/psx/39719/Tekken_3.php<br/>
 +
Click here to download.<br/>
 +
[[File: Game-HAT-Manual07.png]]<br/>
 
[[File:600px-Game-HAT-Manual08.png]]
 
[[File:600px-Game-HAT-Manual08.png]]
*Connect your Raspberry Pi to the network (Make sure the network you connect to is on the same LAN as your PC). Find SHOW IP in Retropie list, press “A” to query the current IP address of your Raspberry Pi.
+
*Connect your Raspberry Pi to the network (Make sure the network you connect to is on the same LAN as your PC). Find the SHOW IP in the Retropie list, and press "A" to query the current IP address of your Raspberry Pi.
 
[[File:600px-Game-HAT-Manual09.jpg|400px]]
 
[[File:600px-Game-HAT-Manual09.jpg|400px]]
 
*Open it with the IP address on your PC.
 
*Open it with the IP address on your PC.
Line 194: Line 202:
  
 
[[File:600px-Game-HAT-Manual11.png]]
 
[[File:600px-Game-HAT-Manual11.png]]
*Then on the emulator choose the page, you can press “Start”->QUIT->RESTART EMULATIONSTAION, and press "A" to confirm. Then restart the emulator, you can find the game added.
+
*Then on the emulator choose the page, you can press “Start”->QUIT->RESTART EMULATIONSTAION, and press "A" to confirm. Then restart the emulator, and you can find the game added.
  
 
For more operations, you can read [https://retropie.org.uk/docs/ Retropie Instructions].
 
For more operations, you can read [https://retropie.org.uk/docs/ Retropie Instructions].
-->
 
  
 
==WIFI Networking==
 
==WIFI Networking==
 
===Retropie and Raspberry Pi OS Set WIFI Networking===
 
===Retropie and Raspberry Pi OS Set WIFI Networking===
 
*Download the following files, and extract the wpa_supplicant.conf file, open the wpa_supplicant.conf file, modify the SSID and password of WIFI and save the file.
 
*Download the following files, and extract the wpa_supplicant.conf file, open the wpa_supplicant.conf file, modify the SSID and password of WIFI and save the file.
**[https://www.waveshare.com/w/upload/0/00/Wpa_supplicant.zip Wpa supplicant.zip]
+
**[https://files.waveshare.com/upload/0/00/Wpa_supplicant.zip Wpa supplicant.zip]
 
*Put the modified wpa_supplicant.conf file in the boot directory and restart the Raspberry Pi. (Connect the TF card to the PC through the card reader, and the opened root directory is the boot directory).
 
*Put the modified wpa_supplicant.conf file in the boot directory and restart the Raspberry Pi. (Connect the TF card to the PC through the card reader, and the opened root directory is the boot directory).
  
Line 307: Line 314:
 
=Resources=
 
=Resources=
 
{{RPi Software}}
 
{{RPi Software}}
*[https://www.waveshare.com/w/upload/6/6f/GamePi43-190717.tar.gz GamePi43-190717 Driver-Supports Retropie-v4.4 and Recalbox6.0-DragonBlaze]
+
*[https://files.waveshare.com/upload/6/6f/GamePi43-190717.tar.gz GamePi43-190717 Driver-Supports Retropie-v4.4 and Recalbox6.0-DragonBlaze]
*[https://www.waveshare.com/w/upload/5/53/GamePi43-200730.tar.gz GamePi43-200730 Driver-SupportRetropie-v4.6]
+
*[https://files.waveshare.com/upload/5/53/GamePi43-200730.tar.gz GamePi43-200730 Driver-SupportRetropie-v4.6]
*[https://www.waveshare.com/w/upload/1/1d/GamePi43-Assembly-Manual.pdf GamePi43 Assemble Manual]
+
*[https://files.waveshare.com/upload/1/1d/GamePi43-Assembly-Manual.pdf GamePi43 Assemble Manual]
  
 
=FAQ=
 
=FAQ=
{{FAQ|I can't play NEO-GEO games on my own system, what should I do?
+
{{FAQ|I can't play NEO-GEO games on my system, what should I do?
|Put [[:File:Neogeo.zip|neogeo.zip]] under the system bios/ and roms/neogeo/ (note: do not unzip), and then restart the system to try.
+
|Put [https://files.waveshare.com/upload/2/2b/Neogeo.zip neogeo.zip] under the system bios/ and roms/neogeo/ (note: do not unzip), and then restart the system to try.
 
}}
 
}}
 
{{FAQ|How long is the battery life when playing games all the time?
 
{{FAQ|How long is the battery life when playing games all the time?
Line 321: Line 328:
 
|https://retropie.org.uk/docs/ Select Emulators in RetroPie Docs to view.
 
|https://retropie.org.uk/docs/ Select Emulators in RetroPie Docs to view.
 
}}
 
}}
+
{{FAQ|Why am I unable to use the blue HK button?
{{Service00}}
+
|
 +
That is because the Retropie system doesn't activate the HK button by default. It is not a hardware problem.<br>
 +
If you use the Recalbbox system, the HK button will work.<br>
 +
On the Retropie system, you can use the Select key to replace the HK button.<br>
 +
That means when configured to HOTKEY ENABLE, reuse the select key to replace the HK key. Then use operations such as select + start to exit the game to achieve the Hot Key function
 +
If you still need to use the HK button in the Retropie, you can try to use the method in this link:https://github.com/recalbox/mk_arcade_joystick_rpi/tree/hotkeybtn
 +
||}}
 +
 
 +
=Support=
 +
{{Servicebox1}}

Latest revision as of 08:23, 15 March 2024

GamePi43
GamePi43

A portable retro video game console based on Raspberry Pi
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Overview

Notice

Please take care of the direction of the poles when mounting the batteries. It may damage the charge circuit if you reverse the batteries. And please use the same types of batteries, different types/brands of batteries may cause charging issues.

Features

  • Raspberry Pi controller, available options:
    • PI3B+, 64-bit 1.4G frequency quad-core CPU, 1G RAM.
    • PI4B-2GB, 64-bit 1.5G frequency quad-core CPU, 2G RAM.
  • 60 fps smooth gaming experience.
  • Compatible with Raspberry Pi A+/B+/2B/3B/3B+4B (external HDMI adapter is required for Pi Zero/Zero W/Zerao WH).
  • Integrates battery charge circuitry, powered from 18650 lithium batteries (NOT included), plays anywhere anytime.
  • Battery life indicator.
  • Onboard speaker and earphone jack, listen to the familiar BGM from the old days.
  • Volume and backlight adjustment keys, adjust the device status according to a specific game, better experience.

User Guides

Hardware connection

  1. Insert the GPIO of Raspberry Pi into GamePi43.
  2. Connect to the HDMI port. Connect the HDMI connector to the HDMI interface of the screen and the board.
    • If you use Raspberry Pi Zero/Raspberry Pi Zero W, you should use an HDMI cable.
  3. Turn the power switch to OFF and mount 18650 batteries.

You can use GamePi43 in two ways: Method 1, using the pre-installed driver image. Method 2: Install the driver for the system.

Method 1: Use pre-configured Image

1) The image of the pre-installed driver is provided here, decompress and write the image to the TF card (open the Win32DiskImager.exe, select the .img file, and click "write" to program the image).

OS Revision Raspberry Pi User name/Password Link
Retropie V4.8 Raspberry Pi 4B pi / raspberry Google Drive
Retropie V4.6 Raspberry Pi 4B pi / raspberry Google Drive
Retropie v4.4 Raspberry Pi 2/3/3B+ pi / raspberry Google Drive
Retropie v4.4 Raspberry Pi 1/Zero/Zero W pi / raspberry Google Drive
Recalbox 6.0-DragonBlaze Raspberry Pi 2/3/3B+ root / recalboxroot Google Drive
Recalbox 6.0-DragonBlaze Raspberry Pi 1/Zero/Zero W root / recalboxroot Google Drive
Recalbox 7.1-DragonBlaze Raspberry Pi 2/3/Pi 3B+ root / recalboxroot Google Drive
Recalbox 7.1-DragonBlaze Raspberry Pi 4 root / recalboxroot Google Drive

2) Write the image to the Micro SD card. Then insert the SD card into Raspberry Pi. Turning the Power switch ON to start Raspberry Pi.

  1. If batteries are low, Raspberry Pi will fail to boot. In this case, you can connect a 5V 3A power adapter to the Power port for charging. Indicators are flashing when charging. (You can play when charging, however, Raspberry Pi will reboot when inserting/disconnecting the power adapter.)
  2. If batteries are enough, the LED of GamePi43 will prompt the current battery level and start the system.

3) After booting, you can select emulators. In Retropie, button "A" is OK, and "B" is the return. In Recalbox, button "B" is OK, and "A" is the return.

4) You can press "Start" to start games.

5) If you want to exit games, press "HK" + "Select" or "Select" + "Start" at the same time.

6) To adjust the volume and backlight of the LCD, you can use the buttons on the bottom of GamePi43.

Method 2: Install driver manually

Install Driver on Retropie

Download the Retropie image from Retropie website.

RetroPie 01.png

1) Download the image file to the computer and unzip it to get the .img file.

2) Connect the TF card to the computer, open the Win32DiskImager.exe, select the .img file prepared in step 1, and click write to program the image.

3) After the programming is completed, use WordPad to open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt, save and eject the TF card safely.

max_usb_current=1
hdmi_force_hotplug=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0

4) Connect the TF card and USB keyboard to the Raspberry Pi, turn on the power switch, start the Raspberry Pi, enter the system, and press F4 on the keyboard to enter the terminal.

5) After entering the terminal, there are two ways to install the driver, and you can choose one of them to install.

  • Method 1: Install the remote sensing driver that comes with the system.

【Note】: The Raspberry Pi must be connected to the network, or else the driver won't be successfully installed.

Enter the following command to enter the configuration interface of RetroPie-Setup:

cd RetroPie-Setup/
sudo ./retropie_setup.sh

Select the Manage Packages option in the following interface, and then press "Enter".

GamePi43 driver01.png

After entering the following interface, select the Manage Driver Packages option and press "Enter".

GamePi43 driver02.png

Select mkarcadejoystick in the following interface and press "Enter".

GamePi43 driver03.png

After entering the next interface, select Install from the source. After the driver is installed, Ctrl+C can exit the RetroPie-Setup configuration interface.

Then enter the following command in the terminal to modify the configuration.

sudo nano /etc/modprobe.d/mk_arcade_joystick_rpi.conf

Modify the statement in the file to

options mk_arcade_joystick_rpi map=1

After saving the file and restarting the system, the keys can be mapped normally.

  • Method 2: Use the driver provided by us and install it in the following way.

Download driver of GamePi43: GamePi43-210127 Driver-Support Retropie-v4.7
Download the GamePi43 driver and copy it to the /boot directory of the TF card (you can also use a USB flash drive or network to copy the driver file to the RetroPie system), and perform the following operations:
Opening the folder where the driver is located.

tar xzvf /boot/GamePi43-210127.tar.gz
cd GamePi43/
sudo ./GamePi43

After restarting, you can enter the system normally.

6) Press and hold the "A" key (other keys are also available), and you will enter the key mapping interface.

Press the corresponding keys according to the instructions to map. Long press the "A" key (other keys are also available), and you can skip the mapping of redundant keys. After all key mappings are complete:

  1. Press "A" to save the configuration and configure the interface.
  2. Press the "B" or "Start" key to abandon the configuration and exit the configuration interface.

After that, you can play the game normally.

Install Driver On Recalbox

Download the latest image from Recalbox website. (Choose the corresponding version according to your Raspberry Pi.)

Recallbox 01.png

1) Unzip the files download to get the .img file

2)Connect the TF card to the computer, open the Win32DiskImager.exe, select the .img file prepared in step 1, and click "write" to program the image.

3) After the programming is completed, copy the GamePi43 driver to the root directory of the TF card (you can also use a USB flash drive or network to copy the driver file to the mirrored file system).

4) Then open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt, then save and quit the TF card safely.

hdmi_force_hotplug=1
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 800 600 60 6 0 0 0
hdmi_drive=2
display_rotate=0
avoid_warnings=1

5) Connect the TF card and USB keyboard to the Raspberry Pi, turn on the power switch, start the Raspberry Pi, press F4 on the keyboard after entering the system, press Alt+F2, enter the account: root, password: recalboxroot, and enter the terminal (also You can log in to the terminal control interface through the network).

6) Enter the following commands in the terminal to configure the keys.

mount -o remount,rw /
 mount -o remount,rw /boot

Edit the recalbox.conf file.

nano /recalbox/share/system/recalbox.conf

Modify the line "controllers.gpio.enabled=0" in the file to

controllers.gpio.enabled=1

After modification, save the file and exit the editing. After entering reboot to restart the system, you can use the buttons normally.

Add new games

Maybe the default games in the test image are not those you want, you can also add games as you like.

  • Usually games take up a lot of memory. so we need to expand the filesystem first. Choose RASPI-CONFIG on the configure page and press enter.

600px-Game-HAT-Manual03.jpg

600px-Game-HAT-Manual04.jpg

  • Choose 7 Advanced Options -> A1 Expand Filesystem, Enter->Finish, (physical keyboard is required).

600px-Game-HAT-Manual05.jpg

  • Choose OK, and reboot.

2) Prepare the game ROMs.
Here is a very cool recommended website: http://coolrom.com/
You can download various game ROMs on it through your PC. For example, if we want to play Sony Playstation games, we can choose.
Game-HAT-Manual06.png
Just find the game you want to play inside and download it. For example: http://coolrom.com/roms/psx/39719/Tekken_3.php
Click here to download.
Game-HAT-Manual07.png
600px-Game-HAT-Manual08.png

  • Connect your Raspberry Pi to the network (Make sure the network you connect to is on the same LAN as your PC). Find the SHOW IP in the Retropie list, and press "A" to query the current IP address of your Raspberry Pi.

600px-Game-HAT-Manual09.jpg

  • Open it with the IP address on your PC.

800px-Game-HAT-Manual10.png

600px-Game-HAT-Manual11.png

  • Then on the emulator choose the page, you can press “Start”->QUIT->RESTART EMULATIONSTAION, and press "A" to confirm. Then restart the emulator, and you can find the game added.

For more operations, you can read Retropie Instructions.

WIFI Networking

Retropie and Raspberry Pi OS Set WIFI Networking

  • Download the following files, and extract the wpa_supplicant.conf file, open the wpa_supplicant.conf file, modify the SSID and password of WIFI and save the file.
  • Put the modified wpa_supplicant.conf file in the boot directory and restart the Raspberry Pi. (Connect the TF card to the PC through the card reader, and the opened root directory is the boot directory).

recalbox Set WIFI Networking

  • Press START to enter the main menu.
  • Select network settings.
  • Change "Enable WIFI" to "On".
  • Select "WIFI SSID" and enter your network name.
  • Select "WIFI Password" and enter your network password.

GamePi2006.jpg

  • Once WiFi is connected, RecalBox will immediately check for system updates:

GamePi2007.jpg

Others

Please refer to retropie user manual.

Interface

【Note】 NC: not connected

PIN Symbol Description
1 3.3V 3.3V power input
2 5V 5V Power input
3 HOTKEY BCM=2, WPI=8
4 5V 5V Power input
5 NC NC
6 GND Ground
7 UP BCM=4,WPI=7
8 TL BCM=14, WPI=15
9 GND Ground
10 X BCM=15, WPI=16
11 DOWN BCM=17, WPI=0
12 Y BCM=18, WPI=1
13 LEFT BCM=27, WPI=2
14 GND Ground
15 RIGHT BCM=22, WPI=3
16 TR BCM=23, WPI=4
17 3.3V 3.3V Power input
18 B BCM=24, WPI=5
19 START BCM=10, WPI=12
20 GND Ground
21 SELECT BCM=9, WPI=13
22 A BCM=25, WPI=6
23 NC NC
24 NC NC
25 GND Ground
26 NC NC
27 NC NC
28 NC NC
29 NC NC
30 GND Ground
31 NC NC
32 NC NC
33 NC NC
34 GND Ground
35 NC NC
36 NC NC
37 NC NC
38 NC NC
39 GND Ground
40 NC NC

Resources

FAQ

 Answer:
Put neogeo.zip under the system bios/ and roms/neogeo/ (note: do not unzip), and then restart the system to try.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
2-3 hours, different games will be different.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
https://retropie.org.uk/docs/ Select Emulators in RetroPie Docs to view.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:

That is because the Retropie system doesn't activate the HK button by default. It is not a hardware problem.
If you use the Recalbbox system, the HK button will work.
On the Retropie system, you can use the Select key to replace the HK button.
That means when configured to HOTKEY ENABLE, reuse the select key to replace the HK key. Then use operations such as select + start to exit the game to achieve the Hot Key function If you still need to use the HK button in the Retropie, you can try to use the method in this link:https://github.com/recalbox/mk_arcade_joystick_rpi/tree/hotkeybtn

{{{5}}}


Support



Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 AM GMT+8 (Monday to Friday)