FT232 USB UART Board (micro)

From Waveshare Wiki
Revision as of 06:15, 15 May 2023 by Eng52 (talk | contribs)
Jump to: navigation, search
FT232 USB UART Board (micro)
FT232-USB-UART-Board-micro

USB TO UART solution with USB micro connector
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Overview

Specification

Item Parameters
Model USB to UART TTL
Power Supply 5V
Baudrate 300bps ~ 3Mbps
UART (TTL) 5V/3.3V
OS Support Support Win7/8/8.1/10/11, Mac, Linux, Android, WinCE...

Interface Description

FT232 USB UART Board Spec01.jpg

Pin Function Input/Output
VCCIO 5V or 3.3V available for external devices (via jumper cap) -
GND Ground -
TXD Serial data transmit pin, connect to MCU.RX Output
RXD Serial data receive pin, connect to MCU.TX Input
RTS# Request to send, connected to MCU.CTS Output
CTS# Clear to send, connected to MCU.RTS. Input
RI# Ringing indication, used to detect whether the external device is ringing, low active Input
DCD# Data carrier detection, low active Input
DTR# Data terminal is ready for controlling external devices, low active Output
DSR# Dataset is ready for detecting whether the external device is ready, low active Input
RESET# FT232 reset pin, low active (pull low the RESET pin, FT232 reset) Input
CBUS0-CBUS4 I/O pin Output/Input

Function Description

FT232 USB UART Board is a UART module that converts the USB interface to the TTL level. This module enables data communication by connecting the USB interface of a computer or other device to TTL logic-level devices such as microcontrollers, sensors, etc.

How to Use

Windows

Driver

There are two drivers for FT232: VCP and D2XX.

  • VCP (Virtual COM Port): The PC side will be recognized as a serial port, using the serial protocol.
  • D2XX driver: The PC side will be recognized as a USB port and needs to be operated using API functions.
  • This product provides a VCP example, so we will only discuss the installation of the VCP driver below.

The following is an example of the driver installation steps for the Windows 10 64-bit system:

Ft232 driver 2.png
USB TO RS4825-5.png
USB TO RS4852-6.png
USB TO RS4852-7.png
USB TO RS4852-8.png

Device Connection

  • Connect the FT232 USB UART Board to the PC.
  • After installing the driver program, connect the FT232 USB UART Board to the USB port of the PC, and the PC finds the new hardware.
  • Right-click the Windows on the left corner of the PC, choose "Device Manager", and you can see as shown below:

FT232 USB UART Board10.png

COM Port Setting (Optional)

The COM Port may change, you can configure it to the specified COM port by the following steps, as follows:
Right-click the COM port in the above figure, click "Port Settings" in the window, then click "Advanced, select the required (not occupied by other) COM port number from the down menu. (not occupied by other devices):

Ft232 com 1.png Ft232 com 2.png Ft232 com 3.png Ft232 com 4.png


Device Connection

  • Connect the FT232 USB UART Board to the PC.
  • After installing the driver program, connect the FT232 USB UART Board to the USB port of the PC, and the PC finds the new hardware.
  • Right-click the Windows on the left corner of the PC, choose "Device Manager", and you can see as shown below:

FT232 USB UART Board10.png

COM Port Setting (Optional)

The COM Port may change, you can configure it to the specified COM port by the following steps, as follows:
Right-click the COM port in the above figure, click "Port Settings" in the window, then click "Advanced, select the required (not occupied by other) COM port number from the down menu. (not occupied by other devices):

Ft232 com 1.png Ft232 com 2.png Ft232 com 3.png Ft232 com 4.png

Linux

Take RPI as an example, use the default driver, connect the device, and query the serial device name through the following command:

lsusb
ls /dev/ttyUSB*

FT232 USB UART Board11.png
For example, use minicom to open UART0, input the following command line:

sudo minicom -D /dev/ttyUSB0
The mainstream Linux systems, such as Raspbian, Ubuntu, and CentOS, generally come with FT232 drivers and can be connected to use. You can also install Linxu drivers to some Linux systems lacking FT232.

Android

For example, connect the Android phone to the PC with FT232:

  • Connect the USB port of FT232 to the USB port of the Android phone with the OTG adapter cable, and then connect to another FT232 and computer via the USB port.

FT232 USB UART Board12.png

  • Download SerialTool_Android to the Android device, unzip it, and then install it.
  • Whether to allow the APP to visit the USB device, click OK.
  • Input the string to be sent in the Android serial tool, the computer can receive the corresponding on the sscom, and vice versa.

FT232 USB UART Board 15.gif

Android serial port assistant used here has integrated Android drivers, no need to install additional drivers; you can also use FTDI Android source code directed development can drive FT232 APP.

MacOS

  1. Click to download the driver.
  2. Driver installation guide: Click here to see the tutorial.
  3. After installing, you can open SSCOM (MAC can directly download the serial debugging assistant online).
More

Resources

FAQ

 Answer:

The FT232 can reach up to 3Mbps.

{{{5}}}


 Answer:

Install this driver.

{{{3}}}
{{{4}}}

{{{5}}}


 Answer:

You can manually install this driver: FT232 Driver WIN11 64.

Ft232 com 1.png FT232 USB UART Boar 21.png FT232 USB UART Boar 22.png FT232 USB UART Boar 23.png

{{{5}}}


 Answer:

The FT232 USB UART Board adopts the official FT232 original chip from FTDI, which can support a variety of operating systems. The drivers for different systems can be downloaded from the official website: www.ftdichip.com/FTDrivers.htm

{{{3}}}
{{{4}}}

{{{5}}}


 Answer:

You can short-circuit TXD and RXD, and then send data in the serial port debugging assistant Windows to see if there is corresponding data returned, if there is, the function is normal; as shown below:
FT232 USB UART Board (mini) FAQ.png
FT232 USB UART Board 06.png

{{{3}}}
{{{4}}}

{{{5}}}


 Answer:

The label faces up, the upper row is VCC GND TXD RXD; the lower row is 5V GND CTS RTS, as shown in the figure: FT232 USB UART Board (mini) FAQ03.png

{{{3}}}
{{{4}}}

{{{5}}}


 Answer:

Temperature range: -15℃~70℃
Humidity range: 5%RH~95%RH

{{{5}}}


 Answer:

Disconnect the power to the external TTL device. A USB serial device should appear. Open the FTDI programming tool, scan for devices, click to program the device, and upon successful programming, it indicates enabling a strengthened 3.3V supply current to the external device.
FT232 USB UART Board FAQ00.png

{{{5}}}


 Answer:

1) Overvoltage and overcurrent, electrostatic reverse connection, harsh environment, electromagnetic interference, and other conditions may cause IC damage:

  • Overvoltage and overcurrent: When the FT232 chip receives an excessive voltage shock, the connected circuit or peripherals consume more current than its specification range, and the current protection mechanism inside the chip may cause damage.
  • Electrostatic reverse connection: When reverse voltage appears between the pins, or when subjected to electrostatic discharge, its internal circuit may be damaged.
  • Harsh environment: Using FT232R under high, low, or humid temperature conditions, especially without proper heat dissipation measures, may lead to chip performance degradation, short circuits, or even damage.
  • Electromagnetic Interference: A strong electromagnetic interference environment may affect the normal operation of the chip, causing performance problems or even damage.

2) To reduce the risk of chip damage, the following precautions are recommended:

  • Use proper supply voltage and current, and avoid over-current and over-voltage conditions.
  • Avoid electrostatic discharge, use anti-static measures, such as wearing electrostatic gloves.
  • Provide sufficient heat dissipation and temperature control to avoid use under extreme temperature conditions.
  • Using Industrial grade products, with the protection of shell, isolation, overcurrent, and overvoltage, it can resist electromagnetic to a certain extent interference.


Beware of knock-offs

Please note that we've found some poor copies of this item in the market. They are usually made of inferior materials and shipped without any testing.

You might be wondering if the one you're watching or you've purchased in other non-official stores is original, feel free to contact us.


Support

If you require technical support, please go to the Support page and open a ticket.