ETH/USB HUB HAT

From Waveshare Wiki
Revision as of 04:51, 26 November 2021 by Waveshare-admin (talk | contribs)
Jump to: navigation, search
ETH/USB HUB HAT
ETH/USB HUB HAT
ETH-USB-HUB-BOX
ETH-USB-HUB-BOX
{{{name3}}}

{{{name4}}}

{{{name5}}}

Instructions

Ethernet / USB HUB HAT for Raspberry Pi, 1x RJ45 Ethernet Port, 3x USB Ports

How to use it

  • Insert the ETH/USB HUB HAT to Raspberry Pi. Connect USB interface of Raspberry Pi to micro USB interface of ETH/USB HUB HAT
ETH-USB-HUB-HAT-4.jpg
  • Connect Network cable to RJ45 interface of ETH/USB HUB HAT
  • Power on Raspberry Pi. PWR indicator lights on and ACT indicator is flashing. Now you can check the network and USB ports
  • When USB devices are connected to USB1~USB3 ports, related LED D1-D3 light on

Interfaces

SYMBOL Description
USB USB interface, should be connected to USB port of Raspberry Pi
USB1~USB3 Extended USB ports, can be connected to external USB devices
ETH RJ45 port, can be connect to wired network

Resources

Supports

Support

If you require technical support, please go to the Support page and open a ticket.