Difference between revisions of "ETH/USB HUB HAT"
From Waveshare Wiki
Line 3: | Line 3: | ||
|name2=[[ETH-USB-HUB-BOX]] | |name2=[[ETH-USB-HUB-BOX]] | ||
|img=[[File:ETH-USB-HUB-HAT-1.jpg|300px|link=https://www.waveshare.com/eth-usb-hub-hat.htm|alt=ETH/USB HUB HAT]] | |img=[[File:ETH-USB-HUB-HAT-1.jpg|300px|link=https://www.waveshare.com/eth-usb-hub-hat.htm|alt=ETH/USB HUB HAT]] | ||
− | | | + | |img2=[[File:ETH-USB-HUB-BOX-1.jpg|300px|link=https://www.waveshare.com/eth-usb-hub-box.htm|alt=ETH-USB-HUB-BOX]] |
|category={{Category:Raspberry Pi}} | |category={{Category:Raspberry Pi}} | ||
|brand=Waveshare | |brand=Waveshare |
Revision as of 04:48, 26 November 2021
| ||
| ||
Instructions
Ethernet / USB HUB HAT for Raspberry Pi, 1x RJ45 Ethernet Port, 3x USB Ports
How to use it
- Insert the ETH/USB HUB HAT to Raspberry Pi. Connect USB interface of Raspberry Pi to micro USB interface of ETH/USB HUB HAT
- Connect Network cable to RJ45 interface of ETH/USB HUB HAT
- Power on Raspberry Pi. PWR indicator lights on and ACT indicator is flashing. Now you can check the network and USB ports
- When USB devices are connected to USB1~USB3 ports, related LED D1-D3 light on
Interfaces
SYMBOL | Description |
---|---|
USB | USB interface, should be connected to USB port of Raspberry Pi |
USB1~USB3 | Extended USB ports, can be connected to external USB devices |
ETH | RJ45 port, can be connect to wired network |
Resources
Supports
Support
If you require technical support, please go to the Support page and open a ticket.