Difference between revisions of "ESP-C3-32S-Kit"
From Waveshare Wiki
(→FAQ) |
|||
Line 40: | Line 40: | ||
==Resources== | ==Resources== | ||
− | *[[:File:Esp-c3-32s-kit-v1.0_specification.pdf| | + | *[[:File:Esp-c3-32s-kit-v1.0_specification.pdf|ESP-C3-32S_Kit specification]] |
*[[:File:Nodemcu-esp-c3-32s-kit-schematics.pdf|ESP-C3-32S-Kit schematics]] | *[[:File:Nodemcu-esp-c3-32s-kit-schematics.pdf|ESP-C3-32S-Kit schematics]] | ||
− | *[[:File:Esp32-c3s_specification.pdf | | + | *[[:File:Esp32-c3s_specification.pdf | ESP-C3-32S specification]] |
*[[:File:Esp-c3-32s_specification-EN.pdf|ESP32-C3S datasheets]] | *[[:File:Esp-c3-32s_specification-EN.pdf|ESP32-C3S datasheets]] | ||
+ | |||
+ | ==AT Firmware== | ||
+ | *[https://docs.espressif.com/projects/esp-at/en/latest/AT_Command_Set/index.html AT Command Set] | ||
+ | *[https://www.waveshare.com/w/upload/9/92/Esp32-c3-at_firmware_2mb.zip Esp32-c3-at_firmware_2mb] | ||
+ | *[https://www.waveshare.com/w/upload/a/ad/Flash_download_tool_v3.8.8.zip Flash_download_tool_v3.8.8] | ||
+ | *[https://www.waveshare.com/w/upload/4/4c/ESP-C3-32S-Kit-firmware_flash_video.zip ESP-C3-32S-Kit-firmware_flash_video] | ||
== Documents for second development == | == Documents for second development == |
Revision as of 09:59, 20 July 2021
| ||
Overview
This is an entry-level development board based on Espressif ESP32-C3 SoC, which is equipped with a RISC-V 32-bit single-core processor, operating frequency up to 160 MHz, supports secondary development without using other microcontrollers or processors. The ESP32-C3 is an highly integrated low power Wi-Fi and Bluetooth system-level chip (SoC), designed for various applications such as internet of things (IoT), mobile devices, wearable electronics, smart home, etc.
Features
- Onboard ESP-C3-32S module that comes with a PCB antenna
- Onboard CH340, USB to UART converter
- RGB 3-in-1 LED, convenient for secondary development
- USB port for power input, firmware programming, or UART debugging
- 2x15pin extension headers, breakout all the I/O pins of the module
- 2x keys, used as reset or user-defined
Specifications
- Complete Wi-Fi 802.11b/g/n, 1T1R mode data rate up to 150Mbps
- Support BLE5.0 and rate support: 125Kbps, 500Kbps, 1Mbps,2Mbps
- Onboard ESP32-C3 chip, 32-bit RISC-V single-core processor, supports a clock frequency of up to 160 MHz, with 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM
- Support UART/PWM/GPIO/ADC/I2C/I2S interface, temperature sensor, pulse counter
- SMD-38 package
- Integrated Wi-Fi MAC/ BB/RF/PA/LNA/BLE
- Support multiple sleep modes, deep sleep electric current is less than 5uA
- UART rate up to 5Mbps
- Support STA/AP/STA+AP mode and mix mode
- Support Smart Config (APP)/AirKiss (WeChat) of Android and IOS One-click network configuration
- Support UART port local upgrade and remote firmware upgrade (FOTA)
- General AT commands can be better understand
- Support secondary development, integrated Linux development environment
- ESP-C3-32S module acquiesce in using the built-in 4MByte Flash, meanwhile support external Flash version
Resources
- ESP-C3-32S_Kit specification
- ESP-C3-32S-Kit schematics
- ESP-C3-32S specification
- ESP32-C3S datasheets
AT Firmware
- AT Command Set
- Esp32-c3-at_firmware_2mb
- Flash_download_tool_v3.8.8
- ESP-C3-32S-Kit-firmware_flash_video
Documents for second development
- Secondary development SDK source code address:https://github.com/espressif/esp-idf
- WeChat applet Bluetooth + WiFi dual control Ai-Thinker ESP32-C3 module application demonstration:https://aithinker.blog.csdn.net/article/details/114983580
- WeChat applet Bluetooth + WiFi dual control Ai-Thinker ESP32-C3 module application demonstration source code:https://github.com/xuhongv/ESP32WiFiBleControlProject
FAQ
Support
Support
If you require technical support, please go to the Support page and open a ticket.