Difference between revisions of "E-Paper ESP32 Driver Board"

From Waveshare Wiki
Jump to: navigation, search
(FAQ)
Line 38: Line 38:
  
 
*Turn on the serial port module: Turn the No. 2 switch to "ON", this switch controls the power supply of the CP2102 (USB to UART module). When you don’t need to use it, you can manually turn off the module to save power (if the No. 2 switch is in the OFF state, the device cannot upload the program)
 
*Turn on the serial port module: Turn the No. 2 switch to "ON", this switch controls the power supply of the CP2102 (USB to UART module). When you don’t need to use it, you can manually turn off the module to save power (if the No. 2 switch is in the OFF state, the device cannot upload the program)
[[File:Epd_esp32_hard_3.png|600px]]
+
[[File:Epd_esp32_hard_30.png|600px]]
 
||}}
 
||}}
 +
 
==Support==
 
==Support==
 
{{Service00}}
 
{{Service00}}

Revision as of 02:15, 1 April 2021

E-Paper ESP32 Driver Board
E-Paper-ESP32-Driver-Board-1.jpg

Universal e-Paper Driver HAT, supports various Waveshare SPI e-Paper raw panels
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute
Category: Expansions, e-Paper, Raspberry Pi
{{{userDefinedInfo}}}: {{{userdefinedvalue}}}
Brand: Waveshare
Website
International: Waveshare website
Chinese:
Onboard Interfaces
Related Products

Introduction

Universal e-Paper Driver HAT, Onboard ESP32, supports various Waveshare SPI interface e-Paper raw panels. Supports refreshing image to e-paper via WIFI or Bluetooth

More

Resources

Documentation

Demo Code

Related Resources

This is a post in Arduino Form about our SPI e-Paper thanks to ZinggJM, maybe you want to refer to.

FAQ

Question:
If you don't have a V2 logo on the back of your 2.13inch e-paper screen, how do I use it?
Answer:
  • Open epd1in13.h in the project and change the following value to 1

Epd2in13 esp chose.png



Question:
For the new version of the ESP32 Driver Board, what are the functions of the above two DIP switches?
Answer:
  • Set the model: Set the No. 1 switch according to the E-Paper model you are using. There are many models of the E-Paper. If the model you used is not listed, please use ‘A’ first to try.

ESP32 SWITCH.png

  • Turn on the serial port module: Turn the No. 2 switch to "ON", this switch controls the power supply of the CP2102 (USB to UART module). When you don’t need to use it, you can manually turn off the module to save power (if the No. 2 switch is in the OFF state, the device cannot upload the program)

Epd esp32 hard 30.png



Support

Please contact us by Email/Skype/WeChat for technology support.Our response may be delay, you can just leave your questions, we will reply to you as soon as possible in working time.

Service email.png [email protected]
Service skype.png [email protected]
Service wechat.png Webchat Linzeru.png
Service time.png 09:00 - 18:00 (UTC+8 Monday to Staturday)