Difference between revisions of "E-Paper ESP32 Driver Board"

From Waveshare Wiki
Jump to: navigation, search
Line 26: Line 26:
 
This is a post in Arduino Form about our SPI e-Paper thanks to ZinggJM, maybe you want to refer to.
 
This is a post in Arduino Form about our SPI e-Paper thanks to ZinggJM, maybe you want to refer to.
 
*[https://forum.arduino.cc/index.php?topic=487007.0 Waveshare e-Paper display with SPI]
 
*[https://forum.arduino.cc/index.php?topic=487007.0 Waveshare e-Paper display with SPI]
 
==Support==
 
{{Service00}}
 
  
 
==FAQ==
 
==FAQ==
Line 35: Line 32:
 
[[File:epd2in13_esp_chose.png|400px]]
 
[[File:epd2in13_esp_chose.png|400px]]
 
|||}}
 
|||}}
 +
 +
{{FAQ|For the new version of the ESP32 Driver Board, what are the functions of the above two DIP switches?|
 +
* Set the model: Set the No. 1 switch according to the E-Paper model you are using. There are many models of the E-Paper. If the model you used is not listed, please use ‘A’ first to try.
 +
[[File:ESP32_SWITCH.png|900px]]
 +
||]]
 +
==Support==
 +
{{Service00}}
 +
 +
  
  
  
 
[[Category:Expansions|Expansions]] [[Category:e-Paper|e-Paper]] [[Category:Raspberry Pi|Raspberry Pi]]
 
[[Category:Expansions|Expansions]] [[Category:e-Paper|e-Paper]] [[Category:Raspberry Pi|Raspberry Pi]]

Revision as of 01:58, 1 April 2021

E-Paper ESP32 Driver Board
E-Paper-ESP32-Driver-Board-1.jpg

Universal e-Paper Driver HAT, supports various Waveshare SPI e-Paper raw panels
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute
Category: Expansions, e-Paper, Raspberry Pi
{{{userDefinedInfo}}}: {{{userdefinedvalue}}}
Brand: Waveshare
Website
International: Waveshare website
Chinese:
Onboard Interfaces
Related Products

Introduction

Universal e-Paper Driver HAT, Onboard ESP32, supports various Waveshare SPI interface e-Paper raw panels. Supports refreshing image to e-paper via WIFI or Bluetooth

More

Resources

Documentation

Demo Code

Related Resources

This is a post in Arduino Form about our SPI e-Paper thanks to ZinggJM, maybe you want to refer to.

FAQ

Question:
If you don't have a V2 logo on the back of your 2.13inch e-paper screen, how do I use it?
Answer:
  • Open epd1in13.h in the project and change the following value to 1

Epd2in13 esp chose.png



{{FAQ|For the new version of the ESP32 Driver Board, what are the functions of the above two DIP switches?|

  • Set the model: Set the No. 1 switch according to the E-Paper model you are using. There are many models of the E-Paper. If the model you used is not listed, please use ‘A’ first to try.

ESP32 SWITCH.png ||]]

Support

Please contact us by Email/Skype/WeChat for technology support.Our response may be delay, you can just leave your questions, we will reply to you as soon as possible in working time.

Service email.png [email protected]
Service skype.png [email protected]
Service wechat.png Webchat Linzeru.png
Service time.png 09:00 - 18:00 (UTC+8 Monday to Staturday)