Difference between revisions of "9HP-CAPQLED"

From Waveshare Wiki
Jump to: navigation, search
Line 89: Line 89:
 
*[https://www.waveshare.com/w/upload/5/5f/9HP-CAPQLED-3D-drawing.zip 9HP-CAPQLED 3D Drawing]
 
*[https://www.waveshare.com/w/upload/5/5f/9HP-CAPQLED-3D-drawing.zip 9HP-CAPQLED 3D Drawing]
  
=='''FAQ'''==
+
='''FAQ'''=
 
{{FAQ| What should I do if I connect to the PC with LCD and it cannot display normally?
 
{{FAQ| What should I do if I connect to the PC with LCD and it cannot display normally?
 
|
 
|

Revision as of 03:18, 27 September 2022

9HP-CAPQLED
9HP-CAPQLED
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

9inch QLED Quantum Dot Display, Capacitive Touch, 1280 × 720, G+G Tempered Glass Panel, Various Devices & Systems Support.

More

Features

  • 9inch QLED quantum dot display, wider color gamut, more pure chroma, and longer lifetime, 1280 x 720 hardware resolution.
  • 10-point capacitive touch control, tempered glass capacitive touch panel, hardness up to 6H.
  • Used with Jetson Nano, supports Ubuntu.
  • Used with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie and driver free.
  • When used as a computer monitor, supports Windows 11/10/8.1/8/7.
  • Support popular Game Consoles like Xbox360, PS4, and SWITCH.
  • Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
  • It has a 3.5mm audio jack and supports HDMI audio output.

What's On Board

9HP-Exterior-Size.jpg

Working with PC

This product supports Windows 11/10/8.1/8/7 OS.:
1. Connect the 5V power supply to the Power port of the LCD, and you can see that the LCD backlight is lit normally.
2. Connect the TOUCH interface of LCD to the USB interface of PC. Wait for a while, the windows will automatically recognize the touch function.
3. Connect the HDMI interface of LCD to the HDMI port of the PC. About 5s later, you can see the LCD display properly. If you need the audio, you can insert 3.5mm earphones into HP ports.
Note:
1) When the computer is connected to several different displays at the same time, only this LCD can be used to control the cursor on the main display, so we recommended setting this LCD as the main display.
2) Some of PC cannot support HDMI screen Hot Plug. In this case, restart the PC can solve.

Working with Raspberry Pi

This LCD can support Raspberry Pi OS / Ubuntu / Kali / Retropie systems.

Please download the latest version of the image on the Raspberry Pi official website.

1) Download the compressed file to the PC, and unzip it to get the .img file.
2) Connect the TF card to the PC, use SDFormatter software to format the TF card.
3) Open the Win32DiskImager software, select the system image downloaded in step 1, and click ‘Write’ to write the system image.
4) After the image has finished writing, open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt, then save and quit the TF card safely.
hdmi_group=2 
hdmi_mode=87 
hdmi_timings=1280 0 160 32 48 720 0 10 10 12 0 0 0 60 0 77000000 3
5) Insert the TF card into the Raspberry Pi
6) Connect the 5V power supply to the Power port of the LCD, and you can see that the LCD backlight is lit normally.
7) Connect the Touch interface of the LCD to the USB port of Raspberry Pi.
8) Connect the HDMI interface of the LCD to the HDMI port of Raspberry Pi and then power on the Raspberry Pi, it can display normally after waiting for about a few seconds.

Working with Jetson Nano

To use with Jetson Nano, it doesn't require to configure.
1) Connect the 5V power supply to the Power port of the LCD, and you can see that the LCD backlight is lit normally.

2) Connect the TOUCH interface of the display to the USB port of Jetson Nano

3) Connect the HDMI interface of the display to the HDMI port of Jetson Nano.

4) Wait for seconds and the display will work normally. If you need to get the audio, you need to connect 3.5mm earphones to the HP port of the display.

Note:
When using the HP audio interface, you may need to set the sound output settings in the system.

Resources

Software

3D Drawing

FAQ

 Answer:
  • Make sure that the HDMI interface of the PC can output normally.
  • The PC only connects to this LCD as a monitor without others.
  • You should connect the touch cable first and then the HDMI cable.
  • Some PC need to be restarted to make the 7inch HDMI LCD display normally.

Note: The PC must use a windows system.

{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
Add the following command to /boot/config.txt
disable_splash=1
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
Replace the custom image with the image in this directory /usr/share/plymouth/themes/pix/splash.png
{{{3}}}
{{{4}}}

{{{5}}}



Anti-Piracy

Since the first-generation Raspberry Pi released, Waveshare has been working on designing, developing, and producing various fantastic touch LCDs for the Pi. Unfortunately, there are quite a few pirated/knock-off products in the market. They're usually some poor copies of our early hardware revisions, and comes with none support service.

To avoid becoming a victim of pirated products, please pay attention to the following features when purchasing:

RPi-LCD-Anti-Piracy.jpg

(Click to enlarge)

Beware of knock-offs

Please note that we've found some poor copies of this item in the market. They are usually made of inferior materials and shipped without any testing.

You might be wondering if the one you're watching or you've purchased in other non-official stores is original, feel free to contact us.


Support

If you require technical support, please go to the Support page and open a ticket.