Difference between revisions of "9HP-CAPQLED"

From Waveshare Wiki
Jump to: navigation, search
(Created page with " {{Infobox item|colorscheme=green |name= 9HP-CAPQLED |img=300px|link=https://www.waveshare.com/9hp-capqled.htm|9HP-CAPQLED |platform=Supports variou...")
 
Line 94: Line 94:
 
*[http://www.waveshare.com/w/upload/7/76/Win32DiskImager.zip Win32DiskImager]
 
*[http://www.waveshare.com/w/upload/7/76/Win32DiskImager.zip Win32DiskImager]
 
*[http://www.waveshare.com/w/upload/5/56/Putty.zip PuTTY]
 
*[http://www.waveshare.com/w/upload/5/56/Putty.zip PuTTY]
 +
 +
===3D Drawing===
 +
*[https://www.waveshare.com/w/upload/5/5f/9HP-CAPQLED-3D-drawing.zip 9HP-CAPQLED 3D Drawing]
  
 
===External guides===
 
===External guides===

Revision as of 07:25, 19 January 2022

9HP-CAPQLED
9HP-CAPQLED
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Onboard Interfaces
USB HDMI

Introduction

9inch QLED Quantum Dot Display, Capacitive Touch, 1280×720, G+G Toughened Glass Panel, Various Devices & Systems Support

More

Features

  • 9inch QLED quantum dot display, wider color gamut, more pure chroma, and longer lifetime.
  • 1280x720 hardware resolution, support software resolution (up to 1920x1080)
  • Toughened glass capacitive touch panel, 6H hardness. (case version only)
  • Support Jetson Nano Developer Kit, driver free
  • Used with Raspberry Pi, supports Raspbian, Ubuntu, WIN 10 IoT, driver free.
  • Support popular Game Consoles like Xbox360, PS4, and SWITCH.
  • Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
  • It has a 3.5mm audio jack and supports HDMI audio output

What's ON Board

9HP-Exterior-Size.jpg

Working with PC

This product supports Windows 10/8.1/8/7 OS.:
1. Connect the TOUCH interface of LCD to the USB interface of PC. Wait for a while, the windows will automatically recognize the touch function.
2. Connect the HDMI interface of LCD to the HDMI port of the PC. About 5s later, you can see the LCD display properly. If you need the audio, you can insert 3.5mm earphones into HP ports.
Note:
1) When the computer is connected to several different displays at the same time, only this LCD can be used to control the cursor on the main display, so we recommended setting this LCD as the main display.
2) Some of PC cannot support HDMI screen Hot Plug. In this case, restart the PC can solve.
3) Sometimes LCD will flicker because of undersupplying from USB cable of PC. You need to connect an external power supply (5V/2A) to DC port.

Working with Raspberry Pi

Supports Raspbian/Ubuntu mate/Windows 10 IoT Core

When working with Raspberry Pi, you should set the resolution of the LCD by yourself, otherwise, the LCD screen will not work. For more detailed information, please read the following section.

Please download the latest version of the image on the Raspberry Pi official website.

1) Download the compressed file to the PC, and unzip it to get the .img file.

2) Connect the TF card to the PC, use SDFormatter.exe software to format the TF card.

3) Open the Win32DiskImager.exe software, select the system image downloaded in step 1, and click‘Write’ to write the system image.

4) After the image has finished writing, open the config.txt file in the root directory of the TF card, and comment out dtoverlay=vc4-fkms-V3D.

5) Add the following code at the end of config.txt, then save and quit the TF card safely.

max_usb_current=1
hdmi_group=2 
hdmi_mode=87 
hdmi_timings=1280 0 160 32 48 720 0 10 10 12 0 0 0 60 0 77000000 3

You must make sure that there are no spaces on either side of the equal sign.

6) Save and connect the TF card to your Pi then power up.

7) Connect the Touch interface of LCD to the USB port of Raspberry Pi.

8) Connect the HDMI interface of LCD to the HDMI port of Raspberry Pi.


Note:

  • Resolution of Ubuntu Mate OS or Windows 10 IoT Core OS can also be set properly by editing config.txt.
  • For Pi Zero / Zero W: if you've used an SD card on a Pi 3 and then attached the card to the Pi Zero, the touch screen often doesn't work. In such cases, you have to write a fresh system image to the SD card. The first boot up must be done on the Pi Zero but not Pi 3, due to initialization for a corresponding device.


Working with Jetson Nano

To use with Jetson Nano, it doesn't require to configure.

1) Connect the TOUCH interface of the display to the USB port of Jetson Nano

2) Connect the HDMI interface of the display to the HDMI port of Jetson Nano.

3) Wait for seconds and the display will work normally. If you need to get the audio, you need to connect 3.5mm earphones to the HP port of the display.

Resources

Software

3D Drawing

External guides

FAQ

 Answer:
  • Make sure that the HDMI interface of the PC can output normally.
  • The PC only connects to this LCD as a monitor without others.
  • You should connect the touch cable first and then the HDMI cable.
  • Some PC need to be restarted to make the 7inch HDMI LCD display normally.

Note: The PC must use a windows system.

{{{3}}}
{{{4}}}

{{{5}}}


Anti-Piracy

Since the first-generation Raspberry Pi released, Waveshare has been working on designing, developing, and producing various fantastic touch LCDs for the Pi. Unfortunately, there are quite a few pirated/knock-off products in the market. They're usually some poor copies of our early hardware revisions, and comes with none support service.

To avoid becoming a victim of pirated products, please pay attention to the following features when purchasing:

RPi-LCD-Anti-Piracy.jpg

(Click to enlarge)

Beware of knock-offs

Please note that we've found some poor copies of this item in the market. They are usually made of inferior materials and shipped without any testing.

You might be wondering if the one you're watching or you've purchased in other non-official stores is original, feel free to contact us.

Support

If you require technical support, please go to the Support page and open a tickets.