From Waveshare Wiki
Revision as of 12:15, 6 January 2023 by Eng49 (talk | contribs) (→‎3D Drawing)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search



8DP-CAPLCD is a mini universal capacitive touch screen with HD resolution and is compatible with most standard HDMI devices.
As it is thin and light with toughened glass capacitive touch panel, 8DP-CAPLCD is excellent in display and has a smooth multi-touch effect.
The baseboard comes with fixed nuts, which enables users to integrate it into an all-in-one project more conveniently.


  • 8-inch IPS screen with a hardware resolution of 1280 x 800.
  • 10-point capacitive touch, with tempered glass panel, hardness up to 6H.
  • Adopting optical bonding touch technology, the display effect is better.
  • Supports Raspberry Pi OS / Ubuntu / Kali and Retropie when used with Raspberry Pi.
  • Supports Windows 11 / 10 / 8.1 / 8 / 7 when used as a computer monitor.
  • Support multi-language OSD menu (can be used for power control, adjusting brightness/contrast, etc.)
  • Support HDMI audio output, onboard 3.5mm headphone jack, and 4PIN speaker jack.



Item Description Unit
Model 8DP-CAPLCD /
Size 8.0 Inch
Viewing Angle 178 Deg
Resolution 1280 x 800 Pixels
Touch screen dimensions 194.00 (H) × 119.00 (V) × 2 (D) mm
Display dimensions 114.66 (H) × 184.16 (V) × 2.6 (D) mm
Display area 107.64 (H) × 172.22 (V) mm
Pixel pitch 0.13455 (H) × 0.13455 (V) mm
Color gamut 62% NTSC
Maximum brightness 400 cd/m²
Contrast 1200:1 /
Backlight adjustment OSD menu dimming /
Refresh Rate 60 Hz
Display port Standard HDMI port /
Power port 5V Type-C power supply /
Power Consumption 4 Watt
Weight 406 g

Electrical Specifications

Parameter Minimum Value Standard Maximum Value Unit Note
Input Voltage 4.75 5.00 5.25 V Note 1
Input Current 750 800 TBD mA Note 2
Operating Temperature 0 25 60 Note 4
Storage Temperature -10 25 70 Note 4

•Note 1: Input voltage exceeding the maximum value or improper operation may cause permanent damage to the device.
•Note 2: The input current must be ≥750mA, otherwise, it will cause startup failure or abnormal display, and it may cause permanent damage to the device if it is in an abnormal state for a long time.
•Note 3: Please do not store the display in a high-temperature and high-humidity environment for a long time. The display must work within the limited value range, otherwise, the display may be damaged.

EDID Sequence Parameter

If the system of the main control board can automatically identify the EDID for display, there is no need to additionally set related sequence parameters.
Otherwise, you can refer to the following EDID settings:

Pixel Clock H Addressable H Blanking V Addressable V Blanking H Front Porch H Sync Width V Front Porch V Sync Width H Image Size V Image Size H Border V Border
77.00 1280 232 800 56 160 32 20 6 294 165 0 0

Interface Introduction


User Guide

Working With Raspberry Pi

Hardware Connection

  1. Connect the Touch port to the USB port of the Raspberry Pi.
  2. Connect the HDMI port to the HDMI port of the Raspberry Pi.


Software Setting

Support Raspberry Pi OS/Ubuntu/Kali and Retropie system.
When LCD works with the Raspberry Pi systems, you must set the resolution manually. Otherwise, the resolution will be wrong and it will affect your experience.

1. Please download the latest image in the official Raspberry Pi website.
2. Download the compressed file on the PC and unzip it to get the ".img" file.
3. Connect the TF card to the PC and use SDFormatter to format the TF card.
4. Open Win32DiskImager.zip, select the system image prepared in the first step, and click "write" to program the system image.
5. After programming, you can open the "config.txt" file in the TF card root directory. Add the following code at the end of "config.txt", save it and then safely remove the TF card.

hdmi_cvt 1280 800 60 6 0 0 0

6. Insert the TF card into the Raspberry Pi, power on the Raspberry Pi, and wait for a few seconds for a normal display.

Working With PC

Support Windows 11/10/8.1/8/7

How To Use

  1. Connect the Touch port of the LCD to the USB port of the PC, and Windows will automatically identify the touch function.
  2. Connect the HDMI port of the LCD to the HDMI port of the PC, and Windows will automatically identify the display function.
  • Note:
  • Some PCs do not support the plug-and-play function of the HDMI device, but it can be used normally after restarting the system.
  • If the power supply of the USB port is insufficient, the LCD will flicker. After connecting an external 5V 1A power adapter to the Power interface of the LCD, it can be operated normally.

Windows Touch Calibration

Take Windows 10 as an example:

  • 1. Enter the Windows settings of the system, type in the search bar and click "Calibrate the screen for pen or touch input" (as shown in the picture below):

Win10 touch011.png

  • 2. Click "Setup" in the pop-up "Tablet PC Settings" interface:

Win10 touch02.png

  • 3. The following text prompt will appear on the screen. Please tap the touch screen with your finger, and the computer will recognize it as a touch screen.
【Note】If the touch screen is blank, press the "Enter" key, and the text prompt will switch to the touch screen. (The screen which displays the text prompt will be used as a touch screen!)

Win10 touch03.png

Outline Dimensions

8DP-CAPLCD 90.jpg


3D Drawing


If you require technical support, please go to the Support page and open a ticket.