Difference between revisions of "7inch HDMI LCD (C)"

From Waveshare Wiki
Jump to: navigation, search
Line 25: Line 25:
 
{{Amazon|{{#urlget:amazon|default}}=display
 
{{Amazon|{{#urlget:amazon|default}}=display
 
|More = [http://www.waveshare.com/7inch-HDMI-LCD-C.htm More]}}
 
|More = [http://www.waveshare.com/7inch-HDMI-LCD-C.htm More]}}
 +
<!--
 
== Working with PC ==
 
== Working with PC ==
 
This product supports Windows 10/8.1/8/7 OS. For the Windows 10/8.1/8 OS, the touch screen supports multi-touch up to 5 points. For some Window 7 OS, the touch screen supports single touch only.
 
This product supports Windows 10/8.1/8/7 OS. For the Windows 10/8.1/8 OS, the touch screen supports multi-touch up to 5 points. For some Window 7 OS, the touch screen supports single touch only.
Line 94: Line 95:
 
* [http://www.waveshare.com/wiki/7inch_HDMI_LCD_(C)_(Firmware_Rev_1.1)_User_Manual 7inch HDMI LCD (C) (Firmware Rev 1.1) User Manual(Not support Raspberry Pi 3 Model B)]
 
* [http://www.waveshare.com/wiki/7inch_HDMI_LCD_(C)_(Firmware_Rev_1.1)_User_Manual 7inch HDMI LCD (C) (Firmware Rev 1.1) User Manual(Not support Raspberry Pi 3 Model B)]
 
*[[:File:7inch-HDMI-LCD-Bicolor-case-assemble.jpg|How to install 7inch Bicolor case]]
 
*[[:File:7inch-HDMI-LCD-Bicolor-case-assemble.jpg|How to install 7inch Bicolor case]]
 
+
-->
 
== Resources ==
 
== Resources ==
 +
<!--
 
An LCD with Rev 2.1 firmware does not require any driver, that is, touch function works properly without installing any software. So we did not provide drivers for Rev 2.1 LCDs.  
 
An LCD with Rev 2.1 firmware does not require any driver, that is, touch function works properly without installing any software. So we did not provide drivers for Rev 2.1 LCDs.  
 
{{7INCH_HDMI_LCD_C_IMAGE}}
 
{{7INCH_HDMI_LCD_C_IMAGE}}
 
{{7INCH_HDMI_LCD_C_DRIVER}}
 
{{7INCH_HDMI_LCD_C_DRIVER}}
 +
-->
 +
*[https://www.waveshare.com/w/upload/c/cc/7inch_HDMI_LCD_%28C%29_User_Manual.pdf User Manual]
 
=== 3D Drawings ===
 
=== 3D Drawings ===
 
* [[:File:7inch_cad.zip|7inch HDMI LCD B/C Drawings]]
 
* [[:File:7inch_cad.zip|7inch HDMI LCD B/C Drawings]]

Revision as of 10:19, 14 August 2018

7inch HDMI LCD (C)
Supports various systems
7inch-HDMI-LCD-C l.jpg

7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems
7inch HDMI LCD (C) (with bicolor case)
7inch-HDMI-LCD-Bicolor-Holder-2.jpg

7inch HDMI LCD (C) + Bicolor case
{{{name3}}}

{{{name4}}}

{{{name5}}}

Note: Some users may find that if they didn't set the config file at first time, then after modify it and reboot their pi, the LCD will flicker and has ghost problem. In this case, please power off the LCD and put it aside for several hours.(wait for the flickering and ghost disappear), and test it again. (please make sure you have set the corresponding resolution as the guide below before using). And you can also adjust the potentiometer on the backside for properly display

Introduction

1024×600, 7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems

More

Resources

3D Drawings

LCD Panel Dimension

Anti-Piracy

Since the first-generation Raspberry Pi released, Waveshare has been working on designing, developing, and producing various fantastic touch LCDs for the Pi. Unfortunately, there are quite a few pirated/knock-off products in the market. They're usually some poor copies of our early hardware revisions, and comes with none support service.

To avoid becoming a victim of pirated products, please pay attention to the following features when purchasing:

RPi-LCD-Anti-Piracy.jpg

(Click to enlarge)

Beware of knock-offs

Please note that we've found some poor copies of this item in the market. They are usually made of inferior materials and shipped without any testing.

You might be wondering if the one you're watching or you've purchased in other non-official stores is original, feel free to contact us.

Support

Support

If you require technical support, please go to the Support page and open a ticket.