Difference between revisions of "7HP-CAPQLED"

From Waveshare Wiki
Jump to: navigation, search
Line 32: Line 32:
<div class="tabbertab" title="Resources">
<div class="tabbertab" title="Resources">
=== Software ===
=== Software ===
*[http://www.waveshare.com/w/upload/d/d7/Panasonic_SDFormatter.zip Panasonic SDFormatter]
*[http://www.waveshare.com/w/upload/d/d7/Panasonic_SDFormatter.zip Panasonic SDFormatter]
*[http://www.waveshare.com/w/upload/7/76/Win32DiskImager.zip Win32DiskImager]
*[http://www.waveshare.com/w/upload/7/76/Win32DiskImager.zip Win32DiskImager]
*[http://www.waveshare.com/w/upload/5/56/Putty.zip PuTTY]
*[http://www.waveshare.com/w/upload/5/56/Putty.zip PuTTY]
===3D Drawing===
===3D Drawing===
*[https://www.waveshare.com/w/upload/e/ec/7HP-CAPQLED-3D-Drawing.zip 7HP CAPQLED 3D Drawing]
*[https://www.waveshare.com/w/upload/e/ec/7HP-CAPQLED-3D-Drawing.zip 7HP CAPQLED 3D Drawing]

Revision as of 07:44, 29 July 2022






7inch QLED Quantum Dot Display, Capacitive Touch, 1024 × 600, G+G Toughened Glass Panel, Various Devices & Systems Support.



  • 7-inch QLED quantum dot display, wider color gamut, more pure chroma, and longer lifetime.
  • 1024 x 600 hardware resolution, support software resolution (up to 1920 x 1080).
  • Toughened glass capacitive touch panel, up to 6H hardness.
  • Use with Jetson Nano Developer Kit, Support Ubuntu system.
  • Use with Raspberry Pi, supports Raspberry Pi OS, Ubuntu, Kali, and Retropie systems.
  • Use with Windows PC, support Windows 11, 10, 8.1, 8, 7, five-points touch.
  • Support popular Game Consoles like Xbox360, PS4, and SWITCH.
  • Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
  • It has a 3.5mm audio jack and supports HDMI audio output.

EDID Sequence Parameters

If the system of the main control board can automatically identify the EDID for display, there is no need to set the relevant timing parameters additionally.
Otherwise, you can refer to the following EDID settings:

Pixel Clock H Addressable H Blanking V Addressable V Blanking H Front Porch H Sync Width V Front Porch V Sync Width H Image Size V Image Size H Border V Border
50.25 1024 320 600 25 44 88 3 6 154 86 0 0

What's ON Board



Since the first-generation Raspberry Pi released, Waveshare has been working on designing, developing, and producing various fantastic touch LCDs for the Pi. Unfortunately, there are quite a few pirated/knock-off products in the market. They're usually some poor copies of our early hardware revisions, and comes with none support service.

To avoid becoming a victim of pirated products, please pay attention to the following features when purchasing:


(Click to enlarge)

Beware of knock-offs

Please note that we've found some poor copies of this item in the market. They are usually made of inferior materials and shipped without any testing.

You might be wondering if the one you're watching or you've purchased in other non-official stores is original, feel free to contact us.

Working with PC

This product supports Windows 11/10/8.1/8/7 OS:
1. Connect the TOUCH interface of the LCD to the USB interface of the PC. Wait for a while, the windows will automatically recognize the touch function.
2. Connect the HDMI interface of the LCD to the HDMI port of the PC. About 5s later, you can see the LCD display properly. If you need the audio, you can insert 3.5mm earphones into HP ports.
1) When the computer is connected to several different displays at the same time, only this LCD can be used to control the cursor on the main display, so we recommended setting this LCD as the main display.
2) Some of PC cannot support the HDMI screen Hot Plug. In this case, restarting the PC can solve.
3) Sometimes LCD will flicker because of undersupplying from the USB cable of the PC. You need to connect an external power supply (5V/2A) to the DC port.

Working with Raspberry Pi

Supports Raspberry Pi OS/Ubuntu/Kali/Retropie Systems.

When working with Raspberry Pi, you should set the resolution of the LCD by yourself, otherwise, the LCD screen will not work. For more detailed information, please read the following section.

Please download the latest version of the image from the Raspberry Pi official website.

1. Download the compressed file to the PC, and extract the img file.
2. Connect the TF card to the PC and use SDFormatter to format the TF card.
3. Open the Win32DiskImager software, select the system image prepared in step 1, and click write to burn the system image.
4. After the programming is completed, open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt and save it.

hdmi_cvt 1024 600 60 6 0 0 0

5. Insert the TF card into the Raspberry Pi, connect the Touch port of the LCD to the USB port of the Raspberry Pi, and connect the HDMI port of the LCD to the HDMI port of the Raspberry Pi.
6. Power on the Raspberry Pi, and it will display normally after a few seconds.


  • On December 2, 2021, the Raspberry Pi OS was divided into two branches, the Buster branch and the Bullseye branch. The Buster branch is a continuation of the old system and is more stable. The Bullseye branch added some new features, using open-source libraries and new interfaces. Since the current Bullseye branch has just been released shortly, it is not stable yet. If you are an industrial user, it is strongly recommended to use the Buster branch.
  • If you use the Buster branch system, you can use it according to the above configuration. But if you are using the Bullseye branch system, you need to modify the default KMS driver to the FKMS driver to display the system desktop normally.

Modification method: Open the config.txt file in the root directory of the TF card, and find the following line:


change into

  • If you need to use the CSI camera under the Bullseye branch system. Since this branch uses the libcamera camera library by default, the library doesn't support FKMS drivers.

So in addition to the above modification, you also need to install the Raspicam camera library.

The installation method is as follows:

 cd ~
 sudo apt install cmake
 git clone https://github.com/raspberrypi/userland
 cd userland
 sudo cp build/bin/* /bin/

Then execute the following command to shut down the system:


Connect the Raspberry Pi camera to the CSI interface of the Raspberry Pi, power on the Raspberry Pi again, and after the system boots, execute the following command:

Take a picture:

 raspistill -o image.jpg

Take a video:

 raspivid -o video.h264 -t 10000

Backlight adjustment on Raspberry Pi OS

wget https://files.waveshare.com/upload/0/01/Brightness-HDMI.zip
unzip Brightness-HDMI.zip
cd Brightness-HDMI
sudo chmod +x install.sh


#lite version Enter the lite directory:
#cd lite
#./Raspi_USB_Backlight_nogui -b X
# X range is 0~10, 0 is the darkest, 10 is the brightest.
#For example: ./Raspi_USB_Backlight_nogui -b 3

Note: Only the Rev4.1 version supports USB dimming function.

Working with Jetson Nano

To work with Jetson Nano Developer Kit, you don't need to make software configurations.

1) Connect the TOUCH interface of the LCD to the USB interface of Jetson Nano.

2) Connect the HDMI interface of the LCD to the HDMI interface of the Jetson Nano and then power on the Jetson Nano. After about 5 seconds, you can see the LCD display normally. If you need to output sound, you can insert 3.5mm earphones into the HP audio output interface.


1) If the LCD flickers, it may be due to the insufficient power supply of the Jetson Nano's USB interface. It can be solved normally after connecting to an external 5V/2A power supply through the DC interface of the LCD.

2) When the HP audio interface is in use, it may be necessary to set the sound output settings in the system.


  • Make sure that the HDMI interface of the PC can output normally.
  • The PC only connects to this LCD as a monitor without others.
  • You should connect the touch cable first and then the HDMI cable.
  • Some PC need to be restarted to make the 7inch HDMI LCD display normally.

Note: The PC must use a windows system.



Please add the following command to /boot/config.txt


You can replace the splash.png from the path /usr/share/plymouth/themes/pix/splash.png to yours.



If you require technical support, please go to the Support page and open a ticket.