6inch e-Paper HAT

6inch e-Paper raw Panel 800x600, 6inch E-Ink raw panel without driver board

6inch e-paper HAT 800x600, 6inch E-Ink display HAT for Raspberry Pi, USB/SPI/I80/I2C interface

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute Category: OLEDs / LCDs, LCD {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: Waveshare website Chinese:

Onboard Interfaces I2C I80 SPI USB

Related Products 4.3inch e-Paper UART Module 13.3inch e-Paper HAT 13.3inch HDMI e-Paper 12.48inch e-Paper Module 12.48inch e-Paper Module (B) 10.3inch HDMI e-Paper 10.3inch e-Paper HAT (D) 10.3inch e-Paper HAT 9.7inch HDMI e-Paper 9.7inch e-Paper HAT 7.8inch e-Paper HAT 7.8inch HDMI e-Paper 7.5inch HD e-Paper HAT 7.5inch HD e-Paper HAT (B) 7.5inch e-Paper HAT 7.5inch e-Paper HAT (B) 7.5inch e-Paper HAT (C) 7.5inch e-Paper (G) 7.5inch NFC-Powered e-Paper 7.5inch NFC-Powered HD e-Paper 6inch e-Paper HAT 6inch HD e-Paper HAT 5.83inch e-Paper HAT 5.83inch e-Paper HAT (B) 5.83inch e-Paper HAT (C) 5.65inch e-Paper Module (F) 4.2inch e-Paper Cloud Module 4.2inch e-Paper Module 4.2inch e-Paper Module (B) 4.2inch e-Paper Module (C) 4.2inch NFC-Powered e-Paper 4.01inch e-Paper (F) 4.01inch e-Paper HAT (F) 3.7inch e-Paper 3.7inch e-Paper HAT 2.9inch e-Paper Module 2.9inch e-Paper Module (B) 2.9inch e-Paper Module (C) 2.9inch e-Paper HAT (D) 2.9inch Touch e-Paper HAT 2.9inch NFC-Powered e-Paper 2.7inch NFC-Powered e-Paper Module 2.7inch e-Paper HAT 2.7inch e-Paper HAT (B) 2.66.inch e-Paper 2.66inch e-Paper Module 2.66inch e-Paper (B) 2.66inch e-Paper Module (B) 2.13inch e-Paper Cloud Module 2.13inch e-Paper HAT 2.13inch e-Paper HAT (B) 2.13inch e-Paper HAT (C) 2.13inch e-Paper HAT (D) 2.13inch Touch e-Paper HAT 2.13inch NFC-Powered e-Paper 1.54inch NFC-Powered e-Paper (BB) 1.54inch NFC-Powered e-Paper (BW) 1.54inch e-Paper Module 1.54inch e-Paper Module (B) 1.54inch e-Paper Module (C) 1.02inch e-paper Module e-Paper Driver HAT EINK-DISP-103 E-Paper Shield e-Paper ESP8266 Driver Board E-Paper ESP32 Driver Board

Note

6inch e-Paper is big size screen, the glass panel and FPC is fragile, please be careful when use it for developing. we recommend you to reinforce the FPC with scotch tape when developing. Please connect all the cables before powering the device, the device cannot support hot-plug.

There are two version, one is raw panel and another is HAT version. Driver board (IT8951) is required for raw panel, if you are the first time to buy this e-paper, recommend you to choose HAT version which come with the driver board.

User Guide

Working with Raspberry Pi

Hardware connection

You should add the IT8951 Driver HAT on Raspberry Pi, communicating via SPI interface.

You can also connecting by wires

Connect to Raspberry Pi via SPI

IT8951 Driver HAT	Raspberry Pi (BCM)	Description'
5V	5V	5V power input
GND	GND	Ground
MISO	P9	MISO Pin of SPI
MOSI	P10	MOSI Pin of SPI
SCK	P11	SCK Pin of SPI
CS	P8	Chip selection of SPI (Low active)
RST	P17	Reset pin (Low active)
HRDY	P24	Busy stats pin (Low when busy)

Resources

• 6inch e-Paper User Manual

Schematic

• Schematic of IT8951 Driver Board
• Schematic of 6inch e-Paper Adapter board

Demo code

• Demo code for Raspberry Pi
• Demo code for STM32 (Open429I)

Datasheet

• 6inch e-Paper Specification
• IT8951 Specifications

Software

• E-LINK-TCON-DEMO

Other documents

• IT8951 I80/SPi/I2C Programming Guide
• |IT851 USB Programming Guide
• Mode description

Support

If you require technical support, please go to the Support page and open a ticket.