Difference between revisions of "6inch HDMI AMOLED"

From Waveshare Wiki
Jump to: navigation, search
m (Text replacement - "=='''Support'''==" to "")
 
(One intermediate revision by the same user not shown)
Line 19: Line 19:
 
</div>
 
</div>
 
<div class="tabbertab" title="Resources">
 
<div class="tabbertab" title="Resources">
== Resource ==
+
= Resource =
=== Software ===
+
== Software ==
 
* [http://www.waveshare.com/w/upload/d/d7/Panasonic_SDFormatter.zip Panasonic SDFormatter]
 
* [http://www.waveshare.com/w/upload/d/d7/Panasonic_SDFormatter.zip Panasonic SDFormatter]
 
* [http://www.waveshare.com/w/upload/7/76/Win32DiskImager.zip Win32DiskImager]
 
* [http://www.waveshare.com/w/upload/7/76/Win32DiskImager.zip Win32DiskImager]
 
* [http://www.waveshare.com/w/upload/5/56/Putty.zip PuTTY]
 
* [http://www.waveshare.com/w/upload/5/56/Putty.zip PuTTY]
</div>
+
=FAQ=
 
 
<div class="tabbertab" title="FAQ">
 
 
 
 
{{FAQ|How to remove the colored squares of the GPU self-check when the Raspberry Pi is powered on?|
 
{{FAQ|How to remove the colored squares of the GPU self-check when the Raspberry Pi is powered on?|
 
*Edit the config.txt and add this line at the end of the config.txt file:
 
*Edit the config.txt and add this line at the end of the config.txt file:
Line 47: Line 44:
 
As shown in the figure below, change the 0 in the original DISABLE_HDMI to 1. If there is no such sentence, please add it directly, save the file and restart the system to block this picture.
 
As shown in the figure below, change the 0 in the original DISABLE_HDMI to 1. If there is no such sentence, please add it directly, save the file and restart the system to block this picture.
 
<br />[[File:7inchC_modification.png|800px]]<br/>
 
<br />[[File:7inchC_modification.png|800px]]<br/>
Note: This method currently only supports Raspberry Pi OS system. If there is a problem with other systems, you need to use Raspberry Pi OS to turn off the DISABLE_HDMI of Raspberry Pi 4B, and then use other systems to display it.
+
Note: This method currently only supports the Raspberry Pi OS system. If there is a problem with other systems, you need to use Raspberry Pi OS to turn off the DISABLE_HDMI of Raspberry Pi 4B, and then use other systems to display it.
 
|||}}
 
|||}}
  
Line 54: Line 51:
  
  
{{Service02}}
+
{{Service00}}
 
</div>
 
</div>
 
[[Category:OLEDs / LCDs|OLEDs / LCDs]] [[Category:LCD|LCD]] [[Category:Raspberry Pi|Raspberry Pi]] [[Category:Raspberry Pi LCD|Raspberry Pi LCD]]
 
[[Category:OLEDs / LCDs|OLEDs / LCDs]] [[Category:LCD|LCD]] [[Category:Raspberry Pi|Raspberry Pi]] [[Category:Raspberry Pi LCD|Raspberry Pi LCD]]
 
</div>
 
</div>

Latest revision as of 07:23, 29 July 2022

6inch HDMI AMOLED
6inch HDMI AMOLED

6inch HDMI AMOLED
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Note: Since the screen is the raw AMOLED screen by default, the front and back cover are made of plastic material, it is very fragile without adding a tempered glass cover or adding a protection case. It needs to be careful during research and development to avoid unnecessary damage.

Introduction

This product is a general-purpose 6-inch high-definition flexible HDMI AMOLED display with a resolution of 1080 × 2160. Supports Raspberry Pi and Jetson Nano and can also be used as a computer monitor.

Features

  • 6-inch flexible AMOLED screen with a hardware resolution of 1080 × 2160.
  • Screen thickness less than 1mm.
  • When used with Raspberry Pi, it supports Raspberry Pi OS / Ubuntu / Kali and Retropie.
  • When used with Jetson Nano, it supports Ubuntu.
  • When used as a computer monitor, it supports Windows 11/10/8.1/8/7.
  • With 3.5mm audio, it supports HDMI audio output.
  • Support backlight control, saving more power.

Featured Design

Design.jpg

Work with Raspberry Pi

When working with Raspberry Pi, 6inch HDMI AMOLED can support various systems like Raspberry Pi OS/Ubuntu /Kail and Retropie.

Raspberry Pi cannot recognize and adapted to the resolution of LCD plugged, therefore, we need to set the resolution of Raspbian manually.

  • Download the newest image from Raspberry Pi Website
  • Unzip the image archive and get the .img file.
  • Format the SD card by the SDFormatter software
  • User the Win32DiskImager software, write the .img file to the SD card.
  • After writing, modify the config.txt file:
max_framebuffer_height=2160
hdmi_group=2
hdmi_mode=87
hdmi_timings=1080 0 36 4 26 2160 1 10 10 10 0 0 0 50 0 145467200 3
  • Save and safely eject the TF card, insert the TF card into the Raspberry Pi.
  • Install the AMOLED baseboard through the back lock, and the Raspberry Pi GPIO interface will be connected to the AMOLED power supply pin through the thimble.
  • Connect the HDMI port of the AMOLED to the HDMI port of the Raspberry Pi, power on the Raspberry Pi, and it will display normally after a few seconds.

The hardware connection is shown as following pictures:

700px-6inch-HDMI-AMOLED-Manual-01.jpg
700px-6inch-HDMI-AMOLED-Manual-02.jpg

Note: This product is portrait mode by default, and the resolution (H×V) is 1080×2160. You can change the AMOLED to the horizontal mode by modifying the software settings. For details, see #Raspberry Pi display rotation.

Raspberry Pi display rotation

The resolution of this display is very high (1080×2160), so rotating the display will consume a lot of resources.
This model only supports Raspberry Pi 4, Raspberry Pi 400 and Compute Module 4 rotation now, the rotation cannot work on other Raspberry Pi.

Update software version

If you are using the Bullseye branch of the Raspberry Pi OS, you need to update the software version as below(If you are using the Raspberry Pi OS Buster branch you don't need to execute this step.

sudo apt-get update
sudo apt-get full-upgrade

Raspberry Pi OS display rotation

Use the following command to rotate the display:

sudo nano /etc/xdg/lxsession/LXDE-pi/autostart
#Enter the command corresponding to the display rotation angle at the end of the autostart file, and it will take effect after rebooting the system.
#0: rotate 0 degrees; 1: rotate 90 degrees; 2: rotate 180 degrees; 3: rotate 270 degrees
xrandr -o 3

Screen Saver

AMOLED screen has many advantages like high contrast, wide color range, wide view angle, and so on. However, it is easy to face a burn-in problem if displaying the same content for a long time. In this case, we recommend you set a screen saver and do not let the AMOLED display the same static image for a long time (cannot longer than 1h).

You can install screen saver with the command below:

sudo apt-get install xscreensaver

Work with Windows PC

When used as a Windows PC, the 6inch AMOLED can supports Windows 11/10/8.1/8/7.

1) Connect the USB Type-C port of the AMOLED to the USB port of the PC. The green light on the baseboard will light up after a few seconds, which means the baseboard is in a normal power supply state. (If the green light flashes, it means that the power supply is abnormal, please unplug and reconnect the power cable again)
2) Connect the HDMI port of the AMOLED to the HDMI port of the PC, and wait for a few seconds to see that the AMOLED displays normally. The sound can be output by connecting an external 4PIN speaker, or you can connect to a 3.5mm earphone through the HP audio output port for use.
【Note】 1: The USB interface of some PCs may cause insufficient power supply due to aging. At this time, you can use the USB interface on the back of the PC host, or an external 5V 2AType-C power adapter to supply power to the USB Type-C port of the screen.
【Note】 2: This product is portrait mode by default, and the resolution (H×V) is 1080×2160. You can change the AMOLED to the horizontal mode by modifying the software settings. For details, see #Windows PC display rotation

Windows PC display rotation

  • Right-click and choose the Display setting
W-R-3.png
  • Click the Identify to detect the display
    • Choose the display, set the display mode to extend and change the orientation
W-R-2.png

Precautions for use

6inch AMOLED caution.jpg

Resource

Software

FAQ

 Answer:
  • Edit the config.txt and add this line at the end of the config.txt file:
disable_splash=1


 Answer:

Replace the custom image with the image in this directory /usr/share/plymouth/themes/pix/splash.png


 Answer:

Long press the "ON/OFF" button on the side of the LCD. (Each time you press and hold the brightness will increase by one stop, a total of 5 levels of brightness.)
Design2.jpg


 Answer:

You can enter the following commands in the terminal of the Raspberry Pi system:

sudo -E rpi-eeprom-config --edit

As shown in the figure below, change the 0 in the original DISABLE_HDMI to 1. If there is no such sentence, please add it directly, save the file and restart the system to block this picture.
7inchC modification.png
Note: This method currently only supports the Raspberry Pi OS system. If there is a problem with other systems, you need to use Raspberry Pi OS to turn off the DISABLE_HDMI of Raspberry Pi 4B, and then use other systems to display it.



Support

If you require technical support, please go to the Support page and open a ticket.