Difference between revisions of "5inch HDMI LCD (H)"

From Waveshare Wiki
Jump to: navigation, search
m (Text replace - " {|style="width:auto" | {|class="bd-yellow at-c" style="table-layout:fixed;border-radius:100px;width:100%;border:2px solid #{{{bordercolor}}}" |- |class="bg-yellow roundy-100 " style="table-layout:fixed;border-radius:100px;padding:10px;width:100px;background:#{{{background}}};"|100px |class="bg-yellow" style="table-layout:fixed;border-radius:100px;background:#{{{background}}};" | Contact your seller (fast response and most recommended) or send emails to '''s...)
m (Text replace - "Service02" to "service00")
Line 72: Line 72:
  
 
=='''Support'''==
 
=='''Support'''==
{{Service02}}
+
{{service00}}
  
 
[[Category:OLEDs / LCDs|OLEDs / LCDs]] [[Category:LCD|LCD]] [[Category:Raspberry Pi|Raspberry Pi]] [[Category:Raspberry Pi LCD|Raspberry Pi LCD]]
 
[[Category:OLEDs / LCDs|OLEDs / LCDs]] [[Category:LCD|LCD]] [[Category:Raspberry Pi|Raspberry Pi]] [[Category:Raspberry Pi LCD|Raspberry Pi LCD]]

Revision as of 08:02, 17 April 2022

5inch HDMI LCD (H)
Supports various systems
5inch-HDMI-LCD-H-1.jpg

5 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Features

  • 5-inch capacitive touch screen with hardware resolution of 800×480.
  • 5-point capacitive touch control, tempered glass panel, hardness up to 6H.
  • When works with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems.
  • When working as a computer monitor, supports Windows 11/10/8.1/8/7, ten-points touch.
  • Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
  • It has a 3.5mm audio jack and supports HDMI audio output.
  • Supports VGA input (specific cable is required and should be purchase separately)

Working with PC

This product supports Windows 11/10/8.1/8/7 OS.

1. Connect the TOUCH interface of LCD to the USB interface of PC. Wait for a while, the windows will automatically recognize the touch function.
2. If you use HDMI, you need to connect the HDMI interface of LCD to the HDMI port of PC. About 10s later, you can see the LCD display properly. If you need the audio, you can insert a 3.5mm earphones to HP ports, or connect to the related speaker module through the speaker interface (such as 8 ohms 5-watt speaker).
3. If you use VGA, you need to connect the VGA interface of LCD to PC's VGA ports by Mini HDMI to VGA Cable.About 10s later, you can see the LCD display properly.

Note:

  • 1) When the computer is connected to several different displays at the same time, only this LCD can be used to control the cursor on the main display, so we recommended to set this LCD as the main display.
  • 2) Some of PC cannot support HDMI screen Hot Plug. In this case, restart the PC can solve.
  • 3) Sometimes LCD will flicker because of undersupplying from USB cable of PC. You need to connect an external power supply (5V/2A) to DC port.
  • 4) HP audio output only works while using HDMI communication.

Working with Raspberry Pi

This LCD can support Raspberry Pi OS / Ubuntu / Kali / Retropie systems.

Please download the latest version of the image on the Raspberry Pi official website.

1) Download the compressed file to the PC, and unzip it to get the .img file.

2) Connect the TF card to the PC, use SDFormatter software to format the TF card.

3) Open the Win32DiskImager software, select the system image downloaded in step 1, and click‘Write’ to write the system image.

4) After the image has finished writing, open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt, then save and quit the TF card safely.

hdmi_group=2
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0  

You must make sure that there are no spaces on either side of the equal sign.

5) Insert the TF card into the Raspberry Pi

6) Connect the Touch interface of the LCD to the USB interface of the Raspberry Pi.

7) Connect the HDMI interface of the LCD to the HDMI interface of the Raspberry Pi, power on the Raspberry Pi, and wait for a few seconds until the LCD displays normally.


Key Introduction

5inch HDMD LCD H 01.jpg

  • Power: Open or Close LCD display
  • Menu: Open OSD menu (It can also work as OK after entering the menu )
  • Up/Left: Direction button
  • Down/Right: Direction button
  • Exit: it can also work as Return after entering the menu

You can use the "Power" button to close the LCD display for reducing consumption if it will be idle for a long time.

Open OSD menu by press button Menu, use "OK button" and "Direction button" to change the configuration, and then use "Return button" to exit.

Resource

Software

Backlight Control

Note: We don't recommend you to do any hardware modification, which may damage LCD if you are not good at it. So be careful when you following this manual

3D file

FAQ

 Answer:
Add the following command to /boot/config.txt
disable_splash=1
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
Replace the custom image with the image in this directory /usr/share/plymouth/themes/pix/splash.png
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
When the Raspberry Pi is powered by a 5V 2A power adapter and connects to 5inch HDMI LCD (H), it doesn’t require an external power supply by default. However, if the user uses the Raspberry Pi to drive other high-power devices at the same time, the USB interface on the Raspberry Pi may be insufficiently powered, at this time an external power supply is required.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
You can try to compile the universal touch driver "hid-multitouch" into the kernel, which generally can make the touch function work.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
Using 5V power supply, the working current is about 400mA.
{{{3}}}
{{{4}}}

{{{5}}}


Anti-Piracy

Since the first-generation Raspberry Pi released, Waveshare has been working on designing, developing, and producing various fantastic touch LCDs for the Pi. Unfortunately, there are quite a few pirated/knock-off products in the market. They're usually some poor copies of our early hardware revisions, and comes with none support service.

To avoid becoming a victim of pirated products, please pay attention to the following features when purchasing:

RPi-LCD-Anti-Piracy.jpg

(Click to enlarge)

Beware of knock-offs

Please note that we've found some poor copies of this item in the market. They are usually made of inferior materials and shipped without any testing.

You might be wondering if the one you're watching or you've purchased in other non-official stores is original, feel free to contact us.

Support