View source for 5inch HDMI LCD (G)


{{Infobox item
|name=[[5inch HDMI LCD (G)]]
|brief=Supports various systems
|img=[[File:5inch-HDMI-LCD-G-1.jpg|300px|link=https://www.waveshare.com/5inch-hdmi-lcd-g.htm]]
|caption=5 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems
|platform=Supports various systems
|category=[[:Category:OLEDs / LCDs|OLEDs / LCDs]], [[:Category:LCD|LCD]], [[:Category:Raspberry Pi LCD|Raspberry Pi LCD]]
|brand=Waveshare
|{{#urlget:amazon|default}}=display
|website_cn=[http://www.waveshare.net/shop/5inch-HDMI-LCD-G.htm 5inch HDMI LCD (G)]
|website_en=[https://www.waveshare.com/5inch-hdmi-lcd-g.htm 5inch HDMI LCD (G)]
|interface1 =USB
|interface2 =HDMI
|related=
{{Product List|Mini PC/Raspberry Pi/Displays}}
}}
== '''Introduction''' ==
5 inch Resistive Touch Screen LCD, with a resolution of 800×480, which supports Raspberry Pi and can also be used as a computer monitor.

{{Amazon|{{#urlget:amazon|default}}=display
|More = [https://www.waveshare.com/5inch-hdmi-lcd-g.htm More]}}

== '''Features''' ==
* 800x480 hardware resolution, configurable by software. (up to 1920x1080)
* Used with Raspberry Pi, supports Raspbian, Ubuntu, WIN 10 IoT, single touch, and driver free.
* Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
* It has a 3.5mm audio jack and supports HDMI audio output
* Supports VGA input <font color="#FF0000">([https://www.waveshare.com/Mini-HDMI-Male-to-VGA-Female-Cable.htm specific cable] is required and should be purchase separately)</font>

{{5inch HDMI LCD (G) user manual}}

=='''Key Introduction'''==
[[File:5inch HDMD LCD H 01.jpg|400px]]

* Power: Open or Close LCD display
* Menu: Open OSD menu (It can also work as OK after entering the menu )
*Up/Left: Direction button
* Down/Right: Direction button
*Exit: it can also work as Return after entering the menu
You can use the "Power" button to close the LCD display for reducing consumption if it will be idle for a long time.

Open OSD menu by press button Menu, use "OK button" and "Direction button" to change the configuration, and then use "Return  button" to exit.

== '''Resources''' ==
* [https://www.waveshare.com/w/upload/a/a9/5inch_HDMI_LCD_G_User_Manual_en.pdf User Manual]

=== Software ===
*[http://www.waveshare.com/w/upload/d/d7/Panasonic_SDFormatter.zip Panasonic SDFormatter]
*[http://www.waveshare.com/w/upload/7/76/Win32DiskImager.zip Win32DiskImager]
*[http://www.waveshare.com/w/upload/5/56/Putty.zip PuTTY]

===External guides===
*[https://www.waveshare.com/w/upload/1/1f/Working_with_Volumio.pdf  Woring with Volumio]

===3D  file===
*[https://www.waveshare.com/w/upload/a/a3/5inch_HDMI_LCD_RTD2660.zip 3D file]

===Backlight Control===
Note: We don't recommend you to do any hardware modification, which may damage LCD if you are not good at it. So be careful when you following this manual
*[[:File:PWM control backlight manual.pdf|PWM control brightness of LCD]]

=='''FAQ'''==
{{FAQ| What should I do if I connect to the PC with LCD and it cannot display normally?
|
*Make sure that the HDMI interface of the PC can output normally.
*The PC only connects to this LCD as a monitor without others.
*You should connect the touch cable first and then the HDMI cable.
*Some PC need to be restarted to make the 7inch HDMI LCD display normally.

Note: The PC must use windows system.
}}
{{FAQ|Do I need an external power supply when I use 5inch HDMI LCD (G) connect to Raspberry Pi?
|When the Raspberry Pi is powered by a 5V 2A power adapter and connects to 5inch HDMI LCD (H), it doesn’t require an external power supply by default. However, if the user uses the Raspberry Pi to drive other high-power devices at the same time, the USB interface on the Raspberry Pi may be insufficiently powered, at this time an external power supply is required.
}}
{{FAQ|How to use the touch function when connected to a Linux PC which is non-designated?
|You can try to compile the universal touch driver "hid-multitouch" into the kernel, which generally can make the touch function work.
}}
{{FAQ|What is the working current for the 5inch HDMI LCD (G) when it works normally?
|Using 5V power supply, the working current is about 400mA.
}}

== '''Anti-Piracy''' ==
{{RPi LCD Anti-Piracy}}
== <font color=red>'''Beware of knock-offs'''</font> ==
{{Beware of knock-offs}}

=='''Support'''==
{{Service02}}



[[Category:OLEDs / LCDs|OLEDs / LCDs]] [[Category:LCD|LCD]] [[Category:Raspberry Pi|Raspberry Pi]] [[Category:Raspberry Pi LCD|Raspberry Pi LCD]]