Difference between revisions of "5inch HDMI LCD"
m (Text replace - "|textwhite=yes" to "") |
|||
Line 2: | Line 2: | ||
[[http://www.waveshare.net/wiki/5inch_HDMI_LCD 中文]] | [[http://www.waveshare.net/wiki/5inch_HDMI_LCD 中文]] | ||
− | |||
{{Infobox item | {{Infobox item | ||
− | |||
|name=[[5inch HDMI LCD]] | |name=[[5inch HDMI LCD]] | ||
|brief=Designed for Raspberry Pi | |brief=Designed for Raspberry Pi | ||
Line 19: | Line 17: | ||
*[http://www.waveshare.com/product/5inch-HDMI-LCD.htm Introduction] | *[http://www.waveshare.com/product/5inch-HDMI-LCD.htm Introduction] | ||
*[http://www.waveshare.com/w/upload/3/3e/RPi-LCD-User-Manual.pdf User manual] | *[http://www.waveshare.com/w/upload/3/3e/RPi-LCD-User-Manual.pdf User manual] | ||
− | + | | | |
− | + | {{RPi_LCD_Application_Notes}} | |
− | + | | | |
+ | {{RPi_Software}} | ||
+ | | | ||
+ | {{5INCH_HDMI_LCD_IMAGE}} | ||
}} | }} | ||
==FAQ== | ==FAQ== |
Revision as of 08:28, 30 July 2015
[中文]
| ||
FAQ
Firstly, you should make sure the custom mirror image used can boot to desktop. Run the following command:
sudo raspi-config
Check the configuration: Enable Boot to Desktop/Scratch -> Desktop Log in as user ‘pi’ at the graphical desktop
Download RPi LCD driver and unzip it. Copy the file LCD-show.tar.gz into your custom mirror image via the network or an U disk. Run the following command:
tar xvf LCD-show.tar.gz cd LCD-show/
- For 3.2inch RPi LCD (B), run the command:
sudo ./LCD32-show
- For 3.5inch RPi LCD (A), run the command:
sudo ./LCD35-show
- For 4inch RPi LCD (A), run the command:
sudo ./LCD4-show
- For 5inch HDMI LCD, run the command:
sudo ./LCD5-show
Then, wait a few minutes, the system will restart automatically. When finished, the RPi LCD is ready to use.
To switch to HDMI display, run the command:
sudo ./LCD-hdmi
{{{5}}}
You should update the mirror image in the same manner as the method shown below, otherwise the system mirror image may not run after updated:
sudo apt-mark hold raspberrypi-bootloader sudo apt-get update sudo apt-get upgrade
{{{5}}}
Support
Support
If you require technical support, please go to the Support page and open a ticket.