From Waveshare Wiki
Jump to: navigation, search
 
(24 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{Infobox item
+
{{#tweekihide:firstHeading|sidebar-left|sidebar-right}}__NOTOC__
|name=5.65inch e-Paper Module (F)
 
|img=[[File:5.65inch-e-Paper-Module-F-2.jpg|300px|{{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/5.65inch-e-paper-module-f.htm}}]]
 
|caption=880x528, 7.5inch EPD panel without driver board
 
|category=[[:Category:OLEDs / LCDs|OLEDs / LCDs]], [[:Category:LCD|LCD]]
 
|brand=Waveshare
 
|{{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}=display
 
|website_cn=[https://www.waveshare.net/shop/5.65inch-e-Paper-Module-F.htm 官方中文站点]
 
|website_en=[https://www.waveshare.com/5.65inch-e-paper-module-f.htm Waveshare website]
 
|interface1=SPI
 
|related=
 
{{Product List|OLEDs / LCDs/e-Paper}}
 
}}
 
<div class="tabber">
 
<div class="tabbertab" title="Introduction">
 
  
==Introduction==
+
<div style="background-color: #343434;text-align: center;color: white;padding: 20px;margin: 8px;">
----
+
=5.65inch e-Paper Module (F) Manual=
This is an 5.65inch colorful e-Paper display module, 600x448 resolution, supports ACeP (Advanced Color ePaper) seven-color.
+
</div>
 +
<p></p>
 +
{{ContentGrid|grid-gap=25px
 +
|content =
  
{{Amazon|{{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}=display
+
{{StudyCard
|More = [https://www.waveshare.com/5.65inch-e-paper-module-f.htm More]}}
+
|img=[[File:Start-test1.png|121px|link=https://www.waveshare.com/wiki/5.65inch_e-Paper_Module_(F)_Manual#Overview]]
 +
|heading = Introduction
 +
|content = Parameters, principles, and precautions
 +
}}
  
===Video===
+
{{StudyCard
https://www.bilibili.com/video/BV1hA411v7NT?zw
+
|img=[[File:数据表-test1.png|121px|link=https://www.waveshare.com/wiki/5.65inch_e-Paper_Module_(F)_Manual#Picture_Production]]
 +
|heading = Image conversion
 +
|content = Create a seven color image
 +
}}
  
===Features===
+
{{StudyCard
*Dimension: 5.65inch
+
|img=[[File:Remote-access-test1.png|121px|link=https://www.waveshare.com/wiki/5.65inch_e-Paper_Module_(F)_Manual#Users_Guides_of_Raspberry_Pi]]
*Outline Dimension (Raw panel): 125.4 x 99.5mm x 0.91mm
+
|heading = Start with Raspberry Pi
*Outline Dimension (Driver board): 114.9mm x 85.8mm
+
|content = Using BCM2835, WiringPi, file IO, RPI (Python) library development routines and instructions
*Display Size: 114.9mm x 85.8mm
+
}}
*Operating Voltage: 3.3V/5V
 
*Interface: SPI
 
*Dot Pitch: 0.1915x 0.1915
 
*Resolution: 600 x 448
 
*Display Color: Black, White, Green, Blue,Red, Yellow,Orange
 
*Full Refresh Time: 33s
 
*Refresh Power: 50mW(Typ.)
 
*Standby Current: <0.01uA (almost none)
 
*Note:
 
1.Refresh time: The refresh time is the experimental results, the actual refresh time will have errors, and the actual effect shall prevail. There will be a flickering effect during the global refresh process, this is a normal phenomenon
 
  
2. Power consumption: The power consumption data is the experimental results. The actual power consumption will have a certain error due to the existence of the driver board and the actual use situation. The actual effect shall prevail.
+
{{StudyCard
 +
|img=[[File:Linux-test1.png|121px|link=https://www.waveshare.com/wiki/5.65inch_e-Paper_Module_(F)_Manual#User_Guides_of_Jetson_Nano]]
 +
|heading = Start with the Jetson Nano
 +
|content = Use C language, Python developed routines and instructions
 +
}}
  
===SPI Communication Timing===
+
{{StudyCard
[[File:1.54inch-e-paper-manual-1.png|400px]]
+
|img=[[File:Config-test1.png|121px|link=https://www.waveshare.com/wiki/5.65inch_e-Paper_Module_(F)_Manual#User_Guides_of_STM32]]
 +
|heading = Starting from the STM32
 +
|content = Use STM32CubeMX to develop routines based on STM32F103ZET6 and their usage instructions
 +
}}
  
Since the ink screen only needs to be displayed, the data cable (MISO) sent from the machine and received by the host is hidden here.
+
{{StudyCard
*CS: Slave chip select, when CS is low, the chip is enabled
+
|img=[[File:Tinker Board 2硬件-test1.png|121px|link=https://www.waveshare.com/wiki/5.65inch_e-Paper_Module_(F)_Manual#User_Guides_of_Arduino]]
*DC: data/command control pin, write command when DC=0; write data when DC=1
+
|heading = Starting from the Arduino
*SCLK: SPI communication clock
+
|content = Routines developed based on Arduino UNO R3 and their usage instructions
*SDIN: SPI communication master sends, slave receives
+
}}
*Timing: CPHL=0, CPOL=0 (SPI0)
 
[Remarks] For specific information about SPI, you can search for information online.<big>
 
  
===Working principle===
+
{{StudyCard
This product is an E-paper device adopting the image display technology of Microencapsulated Electrophoretic Display, MED. The initial approach is to create tiny spheres, in which the charged color pigments are suspended in the transparent oil and would move depending on the electronic charge. The E-paper screen display patterns by reflecting the ambient light, so it has no background light requirement. Under ambient light, the E-paper screen still has high visibility with a wide viewing angle of 180 degrees. It is the ideal choice for E-reading.
+
|img=[[File:Linux-test1.png|121px|link=https://www.waveshare.com/wiki/5.65inch_e-Paper_Module_(F)_Manual#Resources]]
('''Note that the e-Paper cannot support updating directly under sunlight''')
+
|heading = Resources
====Pixel & Byte====
+
|content = Documentation, procedures and data sheets, etc
We define the pixels in a monochrome picture, 0 is black and 1 is white.<br />
+
}}
White:□: Bit 1<br />
 
Black:■: Bit 0<br />
 
*The dot in the figure is called a pixel. As we know, 1 and 0 are used to define the color, therefore we can use one bit to define the color of one pixel, and 1 byte = 8pixels<br />
 
*For example, If we set the first 8 pixels to black and the last 8 pixels to white, we show it by codes, they will be 16 bit as below:<br />
 
[[file:e-paper_hardware_work_1.png]]<br />
 
  
====Color of e-Paper====
+
{{StudyCard
An image is made of pixels. The sizes of every pixel defined who may color are supported by the e-Paper. Monochrome image use one bit for one pixel (0 and 1, black and white), in this case, if we want to display more colors, we should use more bits for every pixel.<br />
+
|img=[[File:显示屏-test1.png|121px|link=https://www.waveshare.com/wiki/5.65inch_e-Paper_Module_(F)_Manual#FAQ]]
You can refer to the '''Make BMP file for e-Paper" guide and make the image yourself for this module.<br />
+
|heading = FAQ
We need at least 3bits to display severe color. For easy programming, we and an 0 bit in front of it. In this case, we use 4 bits for every pixel.
+
|content = e-Paper frequently asked questions
{|border="1" style="text-align:center; width:400px"
+
}}
|-
 
|'''Color'''
 
|'''BIN'''
 
|'''HEX'''
 
|'''The color (reference)'''
 
|-
 
|Black||0b0000||0x0
 
|style="background:#000000"|
 
|-
 
|White||0b0001||0x1||
 
|-
 
|Green||0b0010||0x2
 
|style="background:green"|
 
|-
 
|Blue||0b0011||0x3
 
|style="background:#0000FF"|
 
|-
 
|Red||0b0100||0x4
 
|style="background:#FF0000"|
 
|-
 
|Yellow||0b0101||0x5
 
|style="background:#FFFF00"|
 
|-
 
|Orange||0b0110||0x6
 
|style="background:#FFAA00"|
 
|}
 
For example, if you want to display four colors, green, yellow, red and orange, it should be like as below:
 
{|border="1" style="text-align:center"
 
|-
 
|'''Pixel'''
 
|colspan="4" width="100px"|1
 
|colspan="4" width="100px"|2
 
|colspan="4" width="100px"|3
 
|colspan="4" width="100px"|4
 
|-
 
|'''Bit'''
 
|0||1||2||3||4||5||6||7||8||9||10||11||12||13||14||15
 
|-
 
|'''Data'''||0||0||1||0||0||1||0||1||0||1||0||0||0||1||1||0
 
|-
 
|'''Color'''
 
|colspan="4" style="background:green"|
 
|colspan="4" style="background:yellow"|
 
|colspan="4" style="background:red"|
 
|colspan="4" style="background:#FFAA00"|
 
|}
 
Data is saved in MSB formate and 1byte is equal to 8 bits.
 
{|border="1" style="text-align:center"
 
|-
 
|'''Pixel'''
 
|colspan="4" width="100px"|1
 
|colspan="4" width="100px"|2
 
|colspan="4" width="100px"|3
 
|colspan="4" width="100px"|4
 
|-
 
|'''Bit'''
 
|7||6||5||4||3||3||1||0||7||6||5||4||3||2||1||0
 
|-
 
|'''Data'''||0||0||1||0||0||1||0||1||0||1||0||0||0||1||1||0
 
|-
 
|'''Color'''
 
|colspan="4" style="background:green"|
 
|colspan="4" style="background:yellow"|
 
|colspan="4" style="background:red"|
 
|colspan="4" style="background:#FFAA00"|
 
|-
 
|'''Byte'''
 
|colspan="8"|0x25
 
|colspan="8"|0x46
 
|}
 
<!--:[[File:5in65-ePaper-module-manual-1.png|400px]]-->
 
</div>
 
<div class="tabbertab" title="User Guides of Pi">
 
  
===Precautions===
+
{{StudyCard
#For the screen that supports partial update, please note that you cannot refresh the screen with the partial mode all the time. After several partial updating, you need to fully refresh the screen once. Otherwise, the screen display effect will be abnormal, which cannot be repaired!<br/>
+
|img=[[File:数据表-test1.png|121px|link=https://www.waveshare.com/wiki/5.65inch_e-Paper_Module_(F)_Manual#Support]]
#Because of the different batches, some of them have aberrations. Store the e-Paper right side up will reduce it. And if the e-Paper didn't be refreshed for a long time, it will become more and more reddish/yellowish. Please use the demo code to refresh the e-paper several times in this case.<br/>
+
|heading = Support
#Note that the screen cannot be powered on for a long time. When the screen is not refreshed, please set the screen to sleep mode, or power off the e-Paper. Otherwise, the screen will remain in a high voltage state for a long time, which will damage the e-Paper and cannot be repaired!<br/>
+
|content = Technical support
#When using the e-Paper, it is recommended that the refresh interval be at least 180s, and refresh at least once every 24 hours. If the e-Paper is not used for a long time, the ink screen should be brushed and stored. (Refer to the datasheet for specific storage environment requirements)<br/>
+
}}
#After the screen enters sleep mode, the sent image data will be ignored, and it can be refreshed normally only after initializing again.<br/>
 
#Control the 0x3C or 0x50 (refer to the datasheet for details) register to adjust the border color. In the routine, you can adjust the Border Waveform Control register or VCOM AND DATA INTERVAL SETTING to set the border.<br/>
 
#If you find that the created image data is displayed incorrectly on the screen, it is recommended to check whether the image size setting is correct, change the width and height settings of the image and try again.<br/>
 
#The working voltage of the e-Paper is 3.3V. If you buy the raw panel and you need to add a level convert circuit for compatibility with 5V voltage. The new version of the driver board (V2.1 and subsequent versions) has added a level processing circuit, which can support both 3.3V and 5V working environments. The old version can only support a 3.3V working environment. You can confirm the version before using it. (The one with the 20-pin chip on the PCB is generally the new version)<br/>
 
#The FPC cable of the screen is relatively fragile, pay attention to bending the cable along the horizontal direction of the screen when using it, and do not bend the cable along the vertical direction of the screen<br/>
 
#The screen of e-Paper is relatively fragile, please try to avoid dropping, bumping, and pressing hard.<br/>
 
#We recommend that customers use the sample program provided by us to test with the corresponding development board after they get the screen.<br/>
 
{{Raspberry Pi Guides for SPI e-Paper}}
 
</div>
 
<div class="tabbertab" title="User Guides of Jetson Nano">
 
{{Jetson Nano Guides for SPI e-Paper}}
 
</div>
 
<div class="tabbertab" title="User Guides of STM32">
 
{{STM32 Guides for SPI e-Paper}}
 
</div>
 
<div class="tabbertab" title="User Guides of Arduino">
 
{{Arduino Guides for SPI e-Paper}}
 
</div>
 
<div class="tabbertab" title="User Guides of ESP32">
 
{{ESP32 Guides for SPI e-Paper}}
 
</div>
 
<div class="tabbertab" title="User Guides of ESP8266">
 
{{ESP8266 Guides for SPI e-Paper}}
 
</div>
 
<div class="tabbertab" title="Resources">
 
  
=Resources=
+
}}
=== Documentation ===
 
{{Commom Instruction of SPI e-paper}}
 
*[https://www.waveshare.com/w/upload/b/b6/5.65inch_e-Paper_Module_%28F%29.pdf 5.65inch e-Paper Module (F) Schematic]
 
*[https://www.waveshare.com/w/upload/7/7a/5.65inch_e-Paper_%28F%29_Sepecification.pdf 5.65inch e-Paper Module (F) Specification]
 
*[https://www.waveshare.com/w/upload/b/b5/5.65inch_e-Paper_%EF%BC%88F%EF%BC%89_Application_Note_Reference_Design.pdf 5.65inch e-Paper (F) Application Note Reference Manual]
 
*[https://www.waveshare.com/w/upload/b/bf/SPD1656_1.1.pdf SPD1656 Specification]
 
 
 
===Demo code===
 
*[https://www.waveshare.com/w/upload/3/39/E-Paper_code.7z Demo codes for e-Paper]
 
*[https://github.com/waveshare/e-Paper Github]
 
</div>
 
<div class="tabbertab" title="FAQ">
 
 
 
=FAQ=
 
{{e-paper Hat FAQ}}
 
=Support=
 
{{Service02}}
 

Latest revision as of 10:18, 21 July 2022


5.65inch e-Paper Module (F) Manual

Start-test1.png

Introduction

Parameters, principles, and precautions
数据表-test1.png

Image conversion

Create a seven color image
Remote-access-test1.png

Start with Raspberry Pi

Using BCM2835, WiringPi, file IO, RPI (Python) library development routines and instructions
Linux-test1.png

Start with the Jetson Nano

Use C language, Python developed routines and instructions
Config-test1.png

Starting from the STM32

Use STM32CubeMX to develop routines based on STM32F103ZET6 and their usage instructions
Tinker Board 2硬件-test1.png

Starting from the Arduino

Routines developed based on Arduino UNO R3 and their usage instructions
Linux-test1.png

Resources

Documentation, procedures and data sheets, etc
显示屏-test1.png

FAQ

e-Paper frequently asked questions
数据表-test1.png

Support

Technical support