Difference between revisions of "4.3inch HDMI LCD (B)"

From Waveshare Wiki
Jump to: navigation, search
(One intermediate revision by the same user not shown)
Line 15: Line 15:
 
== Introduction ==
 
== Introduction ==
 
4.3inch, 800x480, Capacitive Touch Screen LCD, HDMI interface, Supports Multi mini-PCs, Multi Systems
 
4.3inch, 800x480, Capacitive Touch Screen LCD, HDMI interface, Supports Multi mini-PCs, Multi Systems
 +
{{4.3inch HDMI LCD B User Manual}}
 
==Resources==
 
==Resources==
 
===User Manual===
 
===User Manual===
Line 26: Line 27:
 
*[http://www.waveshare.com/w/upload/7/76/Win32DiskImager.zip Win32DiskImager]
 
*[http://www.waveshare.com/w/upload/7/76/Win32DiskImager.zip Win32DiskImager]
 
*[http://www.waveshare.com/w/upload/5/56/Putty.zip PuTTY]
 
*[http://www.waveshare.com/w/upload/5/56/Putty.zip PuTTY]
 +
==FAQ==
 +
{{FAQ| What is the working current of 4.3inch HDMI LCD (B)?
 +
|With 5V power input. the working current of LCD is 490mA with backlight turn on
 +
}}
  
 
==Support==
 
==Support==

Revision as of 10:08, 23 July 2019

4.3inch HDMI LCD (B)
4.3inch-HDMI-LCD-B-1.jpg

4.3inch capacitive Touch Screen LCD, HDMI interface, supports various systems
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

4.3inch, 800x480, Capacitive Touch Screen LCD, HDMI interface, Supports Multi mini-PCs, Multi Systems

Features

  • 4.3inch IPS screen, 800 x 480 hardware resolution.
  • 5-point capacitive touch control, tempered glass panel, hardness up to 6H.
  • When working with Raspberry Pi, it supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems.
  • When working as a computer monitor, it supports Windows 11/10/8.1/8/7, five-point touch.
  • Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
  • 3.5mm audio jack, speaker connector, supports HDMI audio output.

How to use

Working with Windows PC

This LCD can support Windows 11 / 10 / 8.1 / 8 / 7 system.

1) Connect the TOUCH interface of the LCD to the USB interface of the PC. Wait for a while, the windows will automatically recognize the touch function.

2) Connect the HDMI interface of LCD to the HDMI port of the PC. About 10s later, you can see the LCD display properly. If you need the audio, you can insert 3.5mm earphones to HP ports, or connect to the related speaker module through the speaker interface (such as 8 ohms 5-watt speaker).

Note: When the computer is connected to several different displays at the same time, only this LCD can be used to control the cursor on the main display, so we recommended setting this LCD as the main display.

Working with Raspberry Pi

This LCD can support Raspberry Pi OS / Ubuntu / Kali / Retropie systems.

Please download the latest version of the image on the Raspberry Pi official website.

1) Download the compressed file to the PC, and unzip it to get the .img file.

2) Connect the TF card to the PC, and use SDFormatter software to format the TF card.

3) Open the Win32DiskImager software, select the system image downloaded in step 1, and click 'Write' to write the system image.

4) After the image has finished writing, open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt, then save and quit the TF card safely.

hdmi_force_hotplug=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0

5) Insert the TF card into the Raspberry Pi.

6) Connect the Touch interface of the LCD to the USB interface of the Raspberry Pi.

7) Connect the HDMI interface of the LCD to the HDMI interface of the Raspberry Pi, power on the Raspberry Pi, and wait for a few seconds until the LCD displays normally.

Keys Introduction

4.3inch HDMI LCD B 01.png

  • Power: Open/Close LCD display (backlight)
  • Menu: Open OSD menu (It can also work as "OK button" after entering the menu )
  • Up/Left: Direction button
  • Down/Right: Direction button
  • Exit: it can also work as Return after entering the menu

You can use the "Power" button to close the LCD display for reducing consumption if it will be idle for a long time.

Open the OSD menu by press the "Menu" button, then use the "OK button" and "Direction button" to change the configuration, and finally use "Return button" to exit.

Resources

User Manual

External guides

3D Drawing

Software

FAQ

 Answer:
With 5V power input. the working current of LCD is 490mA with backlight turn on
{{{3}}}
{{{4}}}

{{{5}}}


Support

Support

If you require technical support, please go to the Support page and open a ticket.