Difference between revisions of "3.5inch RPi LCD (C)"

From Waveshare Wiki
Jump to: navigation, search
(→‎Resource)
(→‎Resource)
Line 18: Line 18:
 
<!--{{RPi LCD User Manual}}-->
 
<!--{{RPi LCD User Manual}}-->
 
== Resource ==
 
== Resource ==
−
*[https://www.waveshare.com/w/upload/2/29/3.5inch_RPi_LCD_User_Manual_EN.pdf User manual]
+
===User Manual===
 +
*[https://www.waveshare.com/w/upload/1/1e/RPi_LCD_User_Manual_EN.pdf RPi LCD User Manual]
  
 
=== Image ===
 
=== Image ===

Revision as of 07:34, 10 January 2019

3.5inch RPi LCD (C)
480x320
3.5inch-RPi-LCD-C

3.5 inch Touch Screen Designed for Raspberry Pi, High SPI speed
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute
Category: OLEDs / LCDs, LCD, Raspberry Pi LCD
{{{userDefinedInfo}}}: {{{userdefinedvalue}}}
Brand: Waveshare
Website
English: Waveshare website
Chinese:
Onboard Interfaces
RPi I/Os
Related Products

Introduction

480x320, 3.5 inch Touch Screen TFT LCD Designed for Raspberry Pi, 125MHz High-Speed SPIi

Resource

User Manual

Image

if you felt hard to install driver, try the image with driver pre-installed.

Driver

Note: Network is required to install driver

Software

FAQ

Question:
Why does the touchscreen not work well?
Answer:

Now, we only provide touch screen drivers for Raspbian and Ubuntu Mate. How to install the driver? See:#Method_1._Driver_installation


Question:
Why does the image provided on wiki does not work on my Pi?
Answer:
  • The image provided may differ depending on batches, however, some Images are just available for Pi 2 (or before, but not for Pi 3). In such cases you can download the latest version from Raspberry Pi website and install the driver. See:#Method_1._Driver_installation
  • Make sure the hardware connection is correct and connects fine.
  • Make sure you've written the image to your SD card using the software File:Win32DiskImager.zip rather then just copy and paste.
  • It is strongly recommended to use a stand-alone 5V/3A power adapter, because the USB port of PC might not have enough power to support the Pi and LCD.


Question:
Could I only connect the HDMI cable?
Answer:
No, the HDMI interface is only used for display. You also need to inserted the GPIO for touching and power. BTW, you can also connect external power adapter to USB interface for power if LCD has external power interface.


Question:
What is working temperature of this LCD?
Answer:
The working temperature is 0°C -- 70°C


Question:
What are the power requirements?
Answer:
When working with 5V input, the current is about 150mA.



Anti-Piracy

Since the first-generation Raspberry Pi released, Waveshare has been working on designing, developing, and producing various fantastic touch LCDs for the Pi. Unfortunately, there are quite a few pirated/knock-off products in the market. They're usually some poor copies of our early hardware revisions, and comes with none support service.

To avoid becoming a victim of pirated products, please pay attention to the following features when purchasing:

RPi-LCD-Anti-Piracy.jpg

(Click to enlarge)

Beware of knock-offs

Please note that we've found some poor copies of this item in the market. They are usually made of inferior materials and shipped without any testing.

You might be wondering if the one you're watching or you've purchased in other non-official stores is original, feel free to contact us.

Support

Mail.png Contact your seller (fast response and most recommended)

or send emails to [email protected] (not fast enough but please be patient) for help.

Our working time: 09:00-18:00 (UTC+8 Monday to Saturday)

Retrieved from "https://www.waveshare.com/w/index.php?title=3.5inch_RPi_LCD_(C)&oldid=15641"