Difference between revisions of "3.5inch RPi LCD (B)"
Line 35: | Line 35: | ||
=== Image === | === Image === | ||
Description: if you felt hard to install driver, try the image with driver pre-installed. | Description: if you felt hard to install driver, try the image with driver pre-installed. | ||
+ | * [https://drive.google.com/open?id=1SRQf3IaG9KWSlR0Ubh57mFRKH5ctWhCH Image for old version] | ||
* [https://drive.google.com/open?id=1bRB06nndOW6k4qpezsL3ZSmiELrBtu-o Image for V2] | * [https://drive.google.com/open?id=1bRB06nndOW6k4qpezsL3ZSmiELrBtu-o Image for V2] | ||
<!--{{3.5inch_RPI_IMAGE}}--> | <!--{{3.5inch_RPI_IMAGE}}--> |
Revision as of 03:41, 23 May 2019
| ||
Introduction
3.5 inch Touch Screen TFT LCD Designed for Raspberry Pi
More |
Version Update
- Because of stop production of old LCD, we update 3.5inch RPi LCD (B) to Rev2.0
- The dimension of LCD is different, and driver is updated as well.(Please download the new driver if you have the new version)
- You can recognize new and old version by the silk screen printing on the backside. The new version has screen printing Rev2.0
- The dimension of LCD are as below, left one is the new version. (download and open it if it is unclear on Wiki)
Resource
User Manual
Image
Description: if you felt hard to install driver, try the image with driver pre-installed.
Driver
The driver can be downloaded from github
git clone https://github.com/waveshare/LCD-show.git
Software
LCD Panel Dimension
FAQ
{{{5}}}
- Make sure the hardware connection is correct and the contact is good.
- Make sure that TF card programming is normal.
- When the Raspberry Pi starts normally, the PWR light is always on, and the ACT light is flashing. If it is found that both lights are always on, it may be that the TF card is not successfully programmed to the image or the TF card is in poor contact with the Raspberry Pi.
- It is recommended to use a 5V 2.5A power adapter for the Raspberry Pi. If the Raspberry Pi is powered by the USB port of the PC, the Raspberry Pi may not be able to start normally due to an insufficient power supply.
{{{5}}}
{{{5}}}
{{{5}}}
{{{5}}}
Anti-Piracy
Since the first-generation Raspberry Pi released, Waveshare has been working on designing, developing, and producing various fantastic touch LCDs for the Pi. Unfortunately, there are quite a few pirated/knock-off products in the market. They're usually some poor copies of our early hardware revisions, and comes with none support service.
To avoid becoming a victim of pirated products, please pay attention to the following features when purchasing:
Beware of knock-offs
Please note that we've found some poor copies of this item in the market. They are usually made of inferior materials and shipped without any testing.
You might be wondering if the one you're watching or you've purchased in other non-official stores is original, feel free to contact us.
Support
Support
If you require technical support, please go to the Support page and open a ticket.