Difference between revisions of "3.5inch RPi LCD (A)"
(22 intermediate revisions by 4 users not shown) | |||
Line 2: | Line 2: | ||
{{Infobox item | {{Infobox item | ||
|name=[[3.5inch RPi LCD (A)]] | |name=[[3.5inch RPi LCD (A)]] | ||
− | |img=[[File:3.5inch-RPi-LCD-A_l.jpg|300px | + | |img=[[File:3.5inch-RPi-LCD-A_l.jpg|300px|{{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=http://www.waveshare.com/product/3.5inch-RPi-LCD-A.htm?amazon}} | 3.5inch RPi LCD (A)]] |
|caption=3.5 inch Touch Screen TFT LCD Designed for Raspberry Pi | |caption=3.5 inch Touch Screen TFT LCD Designed for Raspberry Pi | ||
|platform=Raspberry Pi | |platform=Raspberry Pi | ||
Line 29: | Line 29: | ||
* Provides drivers (works with your own Raspbian/Ubuntu/Kali and Retropie system directly). | * Provides drivers (works with your own Raspbian/Ubuntu/Kali and Retropie system directly). | ||
* Support FBCP software driver, which can set the software resolution and dual-screen display. | * Support FBCP software driver, which can set the software resolution and dual-screen display. | ||
− | * | + | * Its size is the same as your Raspberry Pi. |
− | * | + | * Immersion gold design, fine carving. |
== '''Getting Started''' == | == '''Getting Started''' == | ||
Line 36: | Line 36: | ||
* There are 40 pins on Raspberry Pi, but there are 26 pins on the LCD, so you should pay attention to connecting the pins to your Pi accordingly. | * There are 40 pins on Raspberry Pi, but there are 26 pins on the LCD, so you should pay attention to connecting the pins to your Pi accordingly. | ||
− | ===Install the | + | ===Install the Touch Driver=== |
− | The RPi LCD can be driven in two ways: Method 1. | + | The RPi LCD can be driven in two ways: Method 1. Install a driver to your Raspbian OS. Method 2. Use the Ready-to-use image file of which the LCD driver was pre-installed. |
''' Method 1. Driver installation''' | ''' Method 1. Driver installation''' | ||
− | Please download the | + | Please download the bullseye 32bit version of the image on the [https://www.raspberrypi.org/downloads/ Raspberry Pi official website.] (Raspbian/Ubuntu Mate/Kali or Retropie). |
1) Download the compressed image file to the PC, and unzip it to get the .img file. | 1) Download the compressed image file to the PC, and unzip it to get the .img file. | ||
− | 2) Connect the TF card to the PC, open the [ | + | 2) Connect the TF card to the PC, open the [https://files.waveshare.com/upload/7/76/Win32DiskImager.zip Win32DiskImager] software, select the system image downloaded in step 1, and click 'Write' to write the system image. (How to write an image to a micro SD card for your Pi? See [[RPi-Image-Installation-Guides|RPi Image Installation Guides]] for more details). |
− | 3) Connect the TF card to the Raspberry Pi, start the Raspberry Pi. The LCD will display after booting up, and then log in to the Raspberry Pi terminal,(You may need to connect a keyboard and HDMI LCD to Pi for driver | + | 3) Connect the TF card to the Raspberry Pi, and start the Raspberry Pi. The LCD will display after booting up, and then log in to the Raspberry Pi terminal, (You may need to connect a keyboard and HDMI LCD to Pi for driver installation, or log in remotely with SSH). |
4) Then open the terminal of Raspberry Pi to install the touch driver. | 4) Then open the terminal of Raspberry Pi to install the touch driver. | ||
Line 126: | Line 126: | ||
}} | }} | ||
− | The touch function will work after | + | The touch function will work after restarting. For ease of use, you can set the screen orientation, see: [[#Screen orientation settings]]. |
'''Notes:''' | '''Notes:''' | ||
*1. Executing apt-get upgrade will cause the LCD to fail to work properly. In this case, you need to edit the config.txt file in the SD card and delete this sentence: dtoverlay=ads7846. | *1. Executing apt-get upgrade will cause the LCD to fail to work properly. In this case, you need to edit the config.txt file in the SD card and delete this sentence: dtoverlay=ads7846. | ||
− | *2. Using | + | *2. Using Raspbian-lite, the command of the touch driver installation should be: |
{{#switch: {{FULLPAGENAME}} | {{#switch: {{FULLPAGENAME}} | ||
| 2.8inch RPi LCD (A) = | | 2.8inch RPi LCD (A) = | ||
Line 188: | Line 188: | ||
./LCD4C-show lite | ./LCD4C-show lite | ||
}} | }} | ||
+ | For bullseye 64bit systems, manual configuration is required as follows: [[3.5inch RPi LCD (A) Manual Configuration]]. | ||
+ | |||
'''Method 2. Using Ready-to-use image''' | '''Method 2. Using Ready-to-use image''' | ||
− | The image file with pre-installed driver is located in the IMAGE directory of the CD, or you can download it from [[#Image]]. Extract the .7z file and you will get | + | The image file with the pre-installed driver is located in the IMAGE directory of the CD, or you can download it from [[#Image]]. Extract the .7z file and you will get a .img file. Write the image to your micro SD card (How to write an image to a micro SD card for your Pi? See [[RPi-Image-Installation-Guides|RPi Image Installation Guides]] for more details). Then insert the card into your Pi, power up, and enjoy it. |
<!-- | <!-- | ||
Line 257: | Line 259: | ||
--> | --> | ||
− | == '''Screen | + | == '''Screen Orientation Settings''' == |
After installing the touch driver, you can modify the screen rotation direction by running the following commands. | After installing the touch driver, you can modify the screen rotation direction by running the following commands. | ||
Line 263: | Line 265: | ||
<syntaxhighlight lang="c"> | <syntaxhighlight lang="c"> | ||
cd LCD-show/ | cd LCD-show/ | ||
− | #X can be 0, 90, 180 and 270. Indicates that the LCD rotates 0 degrees, 90 degrees, 180 degrees and 270 degrees, respectively. | + | #X can be 0, 90, 180, and 270. Indicates that the LCD rotates 0 degrees, 90 degrees, 180 degrees, and 270 degrees, respectively. |
#If it is an old version, execute the following code: | #If it is an old version, execute the following code: | ||
sudo ./LCD28-show X | sudo ./LCD28-show X | ||
Line 273: | Line 275: | ||
<syntaxhighlight lang="c"> | <syntaxhighlight lang="c"> | ||
cd LCD-show/ | cd LCD-show/ | ||
− | #X can be 0, 90, 180 and 270. Indicates that the LCD rotates 0 degrees, 90 degrees, 180 degrees and 270 degrees, respectively. | + | #X can be 0, 90, 180, and 270. Indicates that the LCD rotates 0 degrees, 90 degrees, 180 degrees, and 270 degrees, respectively. |
#If it is an old version, execute the following code: | #If it is an old version, execute the following code: | ||
sudo ./LCD28-show lite X | sudo ./LCD28-show lite X | ||
Line 280: | Line 282: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
− | == '''Touch | + | == '''Touch Screen Calibration''' == |
− | This LCD can be calibrated through the xinput-calibrator | + | This LCD can be calibrated through the xinput-calibrator demo. '''Note: The Raspberry Pi must be connected to the network, or else the demo won't be successfully installed.''' |
*Run the following command to install: | *Run the following command to install: | ||
sudo apt-get install xinput-calibrator | sudo apt-get install xinput-calibrator | ||
− | * Click the "Menu" button on the taskbar, choose "Preference" -> "Calibrate Touchscreen". | + | * Click the "Menu" button on the taskbar, and choose "Preference" -> "Calibrate Touchscreen". |
* Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active. | * Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active. | ||
− | * You can create a 99-calibration.conf file to save the touch parameters (not necessary if file exists). | + | * You can create a 99-calibration.conf file to save the touch parameters (not necessary if the file exists). |
sudo nano /etc/X11/xorg.conf.d/99-calibration.conf | sudo nano /etc/X11/xorg.conf.d/99-calibration.conf | ||
* Save the touch parameters (may differ depending on LCD) to 99-calibration.conf, as shown in the picture: | * Save the touch parameters (may differ depending on LCD) to 99-calibration.conf, as shown in the picture: | ||
Line 323: | Line 325: | ||
== '''Install Virtual Keyboard''' == | == '''Install Virtual Keyboard''' == | ||
− | 1. Install matchbox-keyboard <br /> | + | 1. Install matchbox-keyboard. <br /> |
<pre> | <pre> | ||
sudo apt-get install update | sudo apt-get install update | ||
Line 362: | Line 364: | ||
sudo nano /etc/xdg/lxpanel/LXDE-pi/panels/panel | sudo nano /etc/xdg/lxpanel/LXDE-pi/panels/panel | ||
</pre> | </pre> | ||
− | 6. Find the statement which is similar to below: (It | + | 6. Find the statement which is similar to below: (It may be different in a different version.) |
<pre> | <pre> | ||
Plugin { | Plugin { | ||
Line 375: | Line 377: | ||
} | } | ||
</pre> | </pre> | ||
− | 7. Append these statements to add | + | 7. Append these statements to add a button option: |
<pre> | <pre> | ||
Button { | Button { | ||
Line 383: | Line 385: | ||
[[File:RPILCD-INSTALL-KEYBOARD01.png|400px]] <br /> | [[File:RPILCD-INSTALL-KEYBOARD01.png|400px]] <br /> | ||
− | 8. Reboot your Raspberry Pi. If the virtual keyboard is installed correctly, you can find that there is a keyboard icon on the left of the bar | + | 8. Reboot your Raspberry Pi. If the virtual keyboard is installed correctly, you can find that there is a keyboard icon on the left of the bar. |
sudo reboot | sudo reboot | ||
<br /> | <br /> | ||
Line 446: | Line 448: | ||
--> | --> | ||
− | == '''Interface | + | == '''Interface Definition''' == |
The pins marked as "NC" below indicate that the pins are not occupied by the LCD and can be used by the user for other applications. | The pins marked as "NC" below indicate that the pins are not occupied by the LCD and can be used by the user for other applications. | ||
Line 498: | Line 500: | ||
| 22 || RST || Reset | | 22 || RST || Reset | ||
|- | |- | ||
− | | 23 || LCD_SCK / TP_SCK || SPI clock signal for LCD display / touch panel | + | | 23 || LCD_SCK / TP_SCK || SPI clock signal for LCD display/touch panel |
|- | |- | ||
| 24 || LCD_CS || LCD chip select signal, low level selects LCD | | 24 || LCD_CS || LCD chip select signal, low level selects LCD | ||
Line 511: | Line 513: | ||
= Resource = | = Resource = | ||
==User Manual== | ==User Manual== | ||
− | *[https:// | + | *[https://files.waveshare.com/upload/1/1e/RPi_LCD_User_Manual_EN.pdf RPi LCD User Manual] |
<!-- *[[:File:3.5inch-RPi-LCD-A-Schematic.pdf|Schematic]] --> | <!-- *[[:File:3.5inch-RPi-LCD-A-Schematic.pdf|Schematic]] --> | ||
== Image == | == Image == | ||
− | Description: if you felt hard to install driver, try the image with driver pre-installed. | + | Description: if you felt hard to install the driver, try the image with the driver pre-installed. |
− | *[https:// | + | *[https://drive.google.com/file/d/1imrfzcxzSjnNLcWMAivFNQF_kZm0zPJT/view?usp=sharing 3.5inch RPi LCD (A)_20220404_32bit_bullusye] |
<!-- | <!-- | ||
− | * [https://drive.google.com/ | + | * [https://drive.google.com/file/d/1imrfzcxzSjnNLcWMAivFNQF_kZm0zPJT/view?usp=sharing 3.5inch RPi LCD (A)_20220404_32bit_bullusye] |
{{3.5inch_RPI_IMAGE}}--> | {{3.5inch_RPI_IMAGE}}--> | ||
Line 523: | Line 525: | ||
{{RPI LCD DRIVER}} | {{RPI LCD DRIVER}} | ||
== Software == | == Software == | ||
− | * [ | + | * [https://files.waveshare.com/upload/d/d7/Panasonic_SDFormatter.zip Panasonic SDFormatter] |
− | * [ | + | * [https://files.waveshare.com/upload/7/76/Win32DiskImager.zip Win32DiskImager] |
− | * [ | + | * [https://files.waveshare.com/upload/5/56/Putty.zip PuTTY] |
== LCD Panel Dimension == | == LCD Panel Dimension == | ||
− | * [ | + | * [https://files.waveshare.com/upload/0/0c/3.5inch-rpi-lcd-a-panel-dimension.pdf 3.5inch RPi LCD (A) panel dimension] |
<!-- | <!-- | ||
==Certification== | ==Certification== | ||
− | *[https:// | + | *[https://files.waveshare.com/upload/b/bd/3.5inch_RPi_LCD_%28A%29_Certification.rar CE RoHS] |
--> | --> | ||
− | |||
− | |||
= FAQ = | = FAQ = | ||
Line 545: | Line 545: | ||
<div class="tabbertab" title="Support"> | <div class="tabbertab" title="Support"> | ||
--> | --> | ||
− | {{ | + | =Support= |
+ | {{Servicebox1}} | ||
[[Category:OLEDs / LCDs|OLEDs / LCDs]] [[Category:LCD|LCD]] [[Category:Raspberry Pi|Raspberry Pi]] [[Category:Raspberry Pi LCD|Raspberry Pi LCD]] | [[Category:OLEDs / LCDs|OLEDs / LCDs]] [[Category:LCD|LCD]] [[Category:Raspberry Pi|Raspberry Pi]] [[Category:Raspberry Pi LCD|Raspberry Pi LCD]] | ||
</div> | </div> |
Latest revision as of 09:09, 6 February 2024
| ||
Overview
Introduction
3.5 inch Touch Screen TFT LCD is designed for Raspberry Pi.
More |
Features
- 480 × 320 hardware resolution.
- Resistive touch control.
- It is compatible and can be directly inserted into any version of Raspberry Pi.
- Provides drivers (works with your own Raspbian/Ubuntu/Kali and Retropie system directly).
- Support FBCP software driver, which can set the software resolution and dual-screen display.
- Its size is the same as your Raspberry Pi.
- Immersion gold design, fine carving.
Getting Started
Hardware Connection
- There are 40 pins on Raspberry Pi, but there are 26 pins on the LCD, so you should pay attention to connecting the pins to your Pi accordingly.
Install the Touch Driver
The RPi LCD can be driven in two ways: Method 1. Install a driver to your Raspbian OS. Method 2. Use the Ready-to-use image file of which the LCD driver was pre-installed.
Method 1. Driver installation
Please download the bullseye 32bit version of the image on the Raspberry Pi official website. (Raspbian/Ubuntu Mate/Kali or Retropie).
1) Download the compressed image file to the PC, and unzip it to get the .img file.
2) Connect the TF card to the PC, open the Win32DiskImager software, select the system image downloaded in step 1, and click 'Write' to write the system image. (How to write an image to a micro SD card for your Pi? See RPi Image Installation Guides for more details).
3) Connect the TF card to the Raspberry Pi, and start the Raspberry Pi. The LCD will display after booting up, and then log in to the Raspberry Pi terminal, (You may need to connect a keyboard and HDMI LCD to Pi for driver installation, or log in remotely with SSH).
4) Then open the terminal of Raspberry Pi to install the touch driver.
git clone https://github.com/waveshare/LCD-show.git cd LCD-show/
Note: The Raspberry Pi must be connected to the network, or else the touch driver won't be successfully installed.
chmod +x LCD35-show ./LCD35-show
The touch function will work after restarting. For ease of use, you can set the screen orientation, see: #Screen orientation settings.
Notes:
- 1. Executing apt-get upgrade will cause the LCD to fail to work properly. In this case, you need to edit the config.txt file in the SD card and delete this sentence: dtoverlay=ads7846.
- 2. Using Raspbian-lite, the command of the touch driver installation should be:
./LCD35-show lite
For bullseye 64bit systems, manual configuration is required as follows: 3.5inch RPi LCD (A) Manual Configuration.
Method 2. Using Ready-to-use image
The image file with the pre-installed driver is located in the IMAGE directory of the CD, or you can download it from #Image. Extract the .7z file and you will get a .img file. Write the image to your micro SD card (How to write an image to a micro SD card for your Pi? See RPi Image Installation Guides for more details). Then insert the card into your Pi, power up, and enjoy it.
Screen Orientation Settings
After installing the touch driver, you can modify the screen rotation direction by running the following commands.
cd LCD-show/ #X can be 0, 90, 180, and 270. Indicates that the LCD rotates 0 degrees, 90 degrees, 180 degrees, and 270 degrees, respectively. #If it is an old version, execute the following code: sudo ./LCD28-show X #If it is a new version, execute the following code: sudo ./LCD28-show-V2 X
The rotation command under Raspbian-lite is as follows:
cd LCD-show/ #X can be 0, 90, 180, and 270. Indicates that the LCD rotates 0 degrees, 90 degrees, 180 degrees, and 270 degrees, respectively. #If it is an old version, execute the following code: sudo ./LCD28-show lite X #If it is a new version, execute the following code: sudo ./LCD28-show-V2 lite X
Touch Screen Calibration
This LCD can be calibrated through the xinput-calibrator demo. Note: The Raspberry Pi must be connected to the network, or else the demo won't be successfully installed.
- Run the following command to install:
sudo apt-get install xinput-calibrator
- Click the "Menu" button on the taskbar, and choose "Preference" -> "Calibrate Touchscreen".
- Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active.
- You can create a 99-calibration.conf file to save the touch parameters (not necessary if the file exists).
sudo nano /etc/X11/xorg.conf.d/99-calibration.conf
- Save the touch parameters (may differ depending on LCD) to 99-calibration.conf, as shown in the picture:
Install Virtual Keyboard
1. Install matchbox-keyboard.
sudo apt-get install update sudo apt-get install matchbox-keyboard sudo nano /usr/bin/toggle-matchbox-keyboard.sh
2. Copy the statements below to toggle-matchbox-keyboard.sh and save.
#!/bin/bash #This script toggle the virtual keyboard PID=`pidof matchbox-keyboard` if [ ! -e $PID ]; then killall matchbox-keyboard else matchbox-keyboard -s 50 extended& fi
3. Execute the commands:
sudo chmod +x /usr/bin/toggle-matchbox-keyboard.sh sudo mkdir /usr/local/share/applications sudo nano /usr/local/share/applications/toggle-matchbox-keyboard.desktop
4. Copy the statements to toggle-matchbox-keyboard.desktop and save.
[Desktop Entry] Name=Toggle Matchbox Keyboard Comment=Toggle Matchbox Keyboard` Exec=toggle-matchbox-keyboard.sh Type=Application Icon=matchbox-keyboard.png Categories=Panel;Utility;MB X-MB-INPUT-MECHANSIM=True
5. Execute commands as below. Note that you need to use "Pi " user permission instead of root to execute this command.
sudo nano /etc/xdg/lxpanel/LXDE-pi/panels/panel
6. Find the statement which is similar to below: (It may be different in a different version.)
Plugin { type = launchbar Config { Button { id=lxde-screenlock.desktop } Button { id=lxde-logout.desktop } }
7. Append these statements to add a button option:
Button { id=/usr/local/share/applications/toggle-matchbox-keyboard.desktop }
8. Reboot your Raspberry Pi. If the virtual keyboard is installed correctly, you can find that there is a keyboard icon on the left of the bar.
sudo reboot
Interface Definition
The pins marked as "NC" below indicate that the pins are not occupied by the LCD and can be used by the user for other applications.
Pin Number | Identification | Description |
---|---|---|
1 | 3.3V | Power (3.3V input) |
2 | 5V | Power (5V input) |
3 | NC | NC |
4 | 5V | Power (5V input) |
5 | NC | NC |
6 | GND | Ground |
7 | NC | NC |
8 | NC | NC |
9 | GND | Ground |
10 | NC | NC |
11 | TP_IRQ | The touch panel is interrupted, and it is low when it is detected that the touch panel is pressed |
12 | NC | NC |
13 | NC | NC |
14 | GND | Ground |
15 | NC | NC |
16 | NC | NC |
17 | 3.3V | Power (3.3V input) |
18 | LCD_RS | Command/Data Register Select |
19 | LCD_SI / TP_SI | LCD display / SPI data input of touch panel |
20 | GND | Ground |
21 | TP_SO | SPI data output of touch panel |
22 | RST | Reset |
23 | LCD_SCK / TP_SCK | SPI clock signal for LCD display/touch panel |
24 | LCD_CS | LCD chip select signal, low level selects LCD |
25 | GND | Ground |
26 | TP_CS | Touch panel chip select signal, low level selects touch panel |
Resource
User Manual
Image
Description: if you felt hard to install the driver, try the image with the driver pre-installed.
Driver
The driver can be downloaded from github
git clone https://github.com/waveshare/LCD-show.git
Software
LCD Panel Dimension
FAQ
{{{5}}}
- Make sure the hardware connection is correct and the contact is good.
- Make sure that TF card programming is normal.
- When the Raspberry Pi starts normally, the PWR light is always on, and the ACT light is flashing. If it is found that both lights are always on, it may be that the TF card is not successfully programmed to the image or the TF card is in poor contact with the Raspberry Pi.
- It is recommended to use a 5V 2.5A power adapter for the Raspberry Pi. If the Raspberry Pi is powered by the USB port of the PC, the Raspberry Pi may not be able to start normally due to an insufficient power supply.
{{{5}}}
{{{5}}}
{{{5}}}
Support
Technical Support
If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 AM GMT+8 (Monday to Friday)