Difference between revisions of "2.9inch e-Paper HAT (D)"

From Waveshare Wiki
Jump to: navigation, search
Line 1: Line 1:
 
{{Infobox item
 
{{Infobox item
|name=2.13inch e-paper (D)
+
|name=2.9inch e-paper (D)
|name2=2.13inch e-Paper HAT (D)
+
|name2=2.9inch e-Paper HAT (D)
|img=[[File:2.13inch-e-Paper-D-1.jpg|300px|link=https://www.waveshare.com/2.13inch-e-paper-d.htm]]
+
|img=[[File:2.9inch-e-Paper-D-1.jpg|300px|link=https://www.waveshare.com/2.9inch-e-paper-d.htm]]
|img2=[[File:2.13inch-e-Paper-HAT-D-1.jpg|300px|link=https://www.waveshare.com/product/2.13inch-e-paper-hat-d.htm]]
+
|img2=[[File:2.9inch-e-Paper-HAT-D-1.jpg|300px|link=https://www.waveshare.com/product/2.9inch-e-paper-hat-d.htm]]
|caption=212x104, 2.13inch flexible E-Ink display raw panel
+
|caption=296x128, 2.9inch flexible E-Ink display raw panel
|caption2=212x104, 2.13inch flexible E-Ink display HAT for Raspberry Pi, SPI interface
+
|caption2=296x128, 2.9inch flexible E-Ink display HAT for Raspberry Pi, SPI interface
 
|category=[[:Category:OLEDs / LCDs|OLEDs / LCDs]], [[:Category:LCD|LCD]]
 
|category=[[:Category:OLEDs / LCDs|OLEDs / LCDs]], [[:Category:LCD|LCD]]
 
|brand=Waveshare
 
|brand=Waveshare
 
|{{#urlget:amazon|default}}=display
 
|{{#urlget:amazon|default}}=display
|website_cn=[http://www.waveshare.net/shop/2.13inch-e-Paper-HAT-D.htm 官方中文站点]
+
|website_cn=[http://www.waveshare.net/shop/2.9inch-e-Paper-HAT-D.htm 官方中文站点]
|website_en=[https://www.waveshare.com/product/2.13inch-e-paper-hat-d.htm Waveshare website]
+
|website_en=[https://www.waveshare.com/product/2.9inch-e-paper-hat-d.htm Waveshare website]
 
|interface1=SPI
 
|interface1=SPI
 
|related=
 
|related=
Line 17: Line 17:
 
== Introduction ==
 
== Introduction ==
 
{{E-Paper Raw Panel}}
 
{{E-Paper Raw Panel}}
212x104, 2.13inch flexible E-Ink display HAT for Raspberry Pi, SPI interface. Support partial refresh.
+
296*128, 2.9inch flexible E-Ink display HAT for Raspberry Pi, SPI interface. Support partial refresh.
  
 
== Resources ==
 
== Resources ==

Revision as of 06:09, 16 July 2019

2.9inch e-paper (D)
2.9inch-e-Paper-D-1.jpg

296x128, 2.9inch flexible E-Ink display raw panel
2.9inch e-Paper HAT (D)
2.9inch-e-Paper-HAT-D-1.jpg

296x128, 2.9inch flexible E-Ink display HAT for Raspberry Pi, SPI interface
{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

Note: As the raw panel requires a driver board, we recommend you to buy the HAT or buy a driver board for use, or you need to make the driver board by yourself. And this instruction is based on the version with PCB or driver board. 296*128, 2.9inch flexible E-Ink display HAT for Raspberry Pi, SPI interface. Support partial refresh.

Resources

Documentation

Demo code

Datasheets

Related Resources

This is a post in Arduino Form about our SPI e-Paper thanks to ZinggJM, maybe you want to refer to.

FAQ

 Answer:
  • Note that you cannot bend the IC part, only the display area can be bent(>60°). Area marked in red cannot be bent.

Flexible e-Paper Bending.png Flexible-e-Paper-FAQ-1.png

  • The circuity area on the corners of e-Paper cannot be bent too much times, please be careful. Recommend you to use Vcacuum Pen or stick it by sticker when picking it up

Flexible-e-Paper-FAQ-2.png

  • Please make sure there are not particulate matters on both sides of the e-paper panel. You can only bend the flexible e-paper forward and backward, but not in left and right direction.

Flexible-e-Paper-FAQ-3.jpg

  • The flexible e-Paper is covered by hot melt film, the penal should not touch sharp objects, otherwise, it may be damaged
  • The object temperature cannot reach 70°C, otherwise, e-Paper will be damaged
  • If you want to test the bending of flexible e-Paper, you can make a fan-shaped mold whose central angle is 60°and radius is about 5cm


 Answer:
  • Two-color B/W e-paper
    • 【Working】Temperature: 0~50°C; Humidity: 35%~65%RH
    • 【Storage】Temperature: ≤30°C; Humidity: ≤55%RH; Max storage time: 6 months
    • 【Transport】Temperature: -25~70°C; Max transport time: 10 days
    • 【Unpack】Temperature: 20°C±5°C; Humidity: 50%RH±5%RH; Max storage time: Should be assembled in 72h
  • Three-Color e-Paper
    • 【Working】Temperature: 0~40°C; Humidity: 35%~65%RH
    • 【Storage】Temperature: ≤30°C; Humidity: ≤55%RH; Max storage time: 3 months
    • 【Transport】Temperature: -25~60°C; Max transport time: 10 days
    • 【Unpack】Temperature: 20°C±5°C; Humidity: 50%RH±5%RH; Max storage time: Should be assembled in 72h

When store three-color e-Paper, please refresh it to white, and keep the screen upward. Note that you need to update it at least every three months.


Support

Support

If you require technical support, please go to the Support page and open a ticket.