15.6inch FHD Monitor

15.6inch FHD Monitor 1920 x 1080, IPS IPS, 1920 x 1080, 15.6 inch Universal Portable Touch Monitor, HDMI/Type-C

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute Category: OLEDs / LCDs, LCD, Raspberry Pi LCD {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: Website Chinese:

Onboard Interfaces USB Type-C HDMI 3.5mm

Related Products 15.6inch HDMI LCD (H) (with case) 15.6inch HDMI LCD (H) 15.6inch FHD Monitor 13.3inch HDMI LCD (H) (with case) V2 13.3inch HDMI LCD (H) (with case) 13.3inch HDMI LCD (H) 13.3inch Magic Mirror 13.3inch Magic Mirror C4 13.3inch PiPad 13.3inch PiPad C4 12.5inch FHD Monitor 11.6inch HDMI LCD (H) (with case) 11.6inch HDMI LCD (H) 11.9inch HDMI LCD 10.5inch HDMI AMOLED 10.1inch HDMI LCD 10.1inch HDMI LCD (B) (with case) 10.1inch HDMI LCD (E) 10.1inch HDMI LCD (G) (with case) 10.1inch HDMI LCD (H) (with case) 10.1HP-CAPQLED 9inch 2560x1600 Monitor 9HP-CAPQLED 8.8inch Side Monitor 8inch DSI LCD 8inch DSI LCD (with cam) 7.9inch HDMI LCD 7inch FHD Monitor 7inch HDMI LCD (H) (with case) 7inch HDMI LCD (C) 7inch HDMI LCD (B) 7inch HDMI LCD 7inch DPI LCD 7HP-CAPQLED 7inch DSI LCD 7inch DSI LCD (with cam) 7inch DSI LCD (with case A) 7inch DSI LCD (C) 6inch HDMI AMOLED 5inch HDMI LCD (H) 5inch HDMI LCD (H) V4 5inch HDMI LCD (G) 5inch HDMI LCD (B) 5inch HDMI LCD 5inch HDMI AMOLED 5inch DPI LCD 5inch DSI LCD 5.5inch HDMI AMOLED 4inch HDMI LCD (C) 4inch DSI LCD 4.3inch HDMI LCD (B) 4.3inch DSI LCD 4inch DSI LCD 4inch DPI LCD (B) 4inch DPI LCD (C) 4inch HDMI LCD (H) 4inch HDMI LCD 4inch RPi LCD (C) 4inch RPi LCD (A) 3.5inch DPI LCD 3.5inch HDMI LCD 3.5inch RPi LCD (C) 3.5inch RPi LCD (B) 3.5inch RPi LCD (A) 3.2inch HDMI LCD (H) 3.2inch RPi LCD (B) 2.8inch HDMI LCD (H) 2.8inch DPI LCD 2.8inch RPi LCD (A) 2.23inch OLED HAT 1.3inch OLED HAT 1.3inch LCD HAT 1.44inch LCD HAT 1.8inch LCD Module EINK-DISP-103 LCD1602 RGB Module Pico-Clock-Green Pico-RGB-Matrix-P3-64x32 RGB-Matrix-P3-64x32

Overview

Introduction

15.6inch Universal Portable Touch Monitor, 1920 × 1080 Full HD, IPS Screen, HDMI/Type-C, Ideal Companion for Various Host Devices.

more

Features

• Display: 15.6inch, 1920 × 1080 pixels, IPS screen (up to 178° viewing angle).
• Touch panel: capacitive, toughened glass panel, 6H hardness.
• Display interface: Type-C/HDMI.
• Touch interface: Type-C(Can be connected to the Type-C/USB port of the device).
• When used with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie.
• When used as a computer monitor, supports Windows 11/10/8.1/8/7.
• Supports notebooks from Apple, HUAWEI, Lenovo, HP, DELL, etc. dual-screen display, balancing work and entertainment.
• Supports cell phones from HUAWEI, OPPO, Samsung, etc. Mirror cast via the Type-C connection, the ideal companion for traveling.
• Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch.
• Multi-language OSD menu, for power management, brightness/contrast adjustment, etc.
• USB expansion port for mouse/keyboard.
• Type-C/HDMI audio input, 3.5mm headphone/speaker jack.
• Embedded ferrite Hi-Fi speaker.
• 10000mAh big battery, enables 3-4h playtime on the trip.

Interfaces and Buttons

How to Use

Working with PC

This LCD supports Windows 7/8/8.1/10/11 when working with a PC via an HDMI interface.

1. Long-press the ON/OFF button for 1-2 seconds, and the backlight of the LCD will turn on.
【Note】: If the LCD does not respond after pressing the ON/OFF button, please use a 5V power adapter to connect to the DC interface of the LCD for charging. For the '15.6inch FHD Monitor for EU', the specification of the power adapter is 5V/3A.

2. Connect the Touch interface of the LCD to the USB port of the PC by USB cable. The touch function is enabled after that.

3. Connect the HDMI interface of the LCD to the HDMI interface of the PC by HDMI cable. LCDs normally after seconds.

Note:
1) When the PC is connected to multiple monitors at the same time, the touch effect works on the main screen by default, if you want to specify touch to the secondary screen, see #Specifies Touch to Secondary Screen (Windows).
2) Some PCs do not support HDMI devices plug-and-play, generally after rebooting the system can be used normally.
3) Some PCs may not have enough power supply for the USB interface, resulting in LCD flicker, which can be used normally after accessing the external 5V/2A power supply through the DC interface.
4) Only when the HDMI communication, HP audio output can be used normally.

Specifies Touch to Secondary Screen (Windows)

Take the windows10 system as an example:

• 1. Enter the Windows settings of the system, type in the search bar, and click "Calibrate the screen for pen or touch input" (as shown in the picture below).

• 2. Click "Setup" in the pop-up "Tablet PC Settings" interface:
• 3. The following text prompt will appear on the screen. Please tap the touch screen with your finger, and the computer will recognize it as a touch screen.

【Note】If the touch screen is blank, press the "Enter" key, and the text prompt will switch to the touch screen. (The screen which displays the text prompt will be used as a touch screen!)

Working with Raspberry Pi

This model can support Raspberry Pi OS / Ubuntu / Kali and Retropie systems. When working with Raspberry Pi, the resolution must be set manually, otherwise, it will cause an abnormal display. For more detailed information, please read the following section.

1. Download the Raspbian image from Raspberry Pi website.

2. Connect the TF card to your PC and format it by SDFormatter software.

3. Write the .img file to your TF card by Win32DiskImager software. Select the system image downloaded in Step 1, and click "Write" to write the system image.

4. After the image has finished writing, open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt, then save and quit the TF card safely.

hdmi_group=2
hdmi_mode=82
hdmi_cvt 1920 1080 60 6 0 0 0

You must make sure that there are no spaces on either side of the equal sign.

5. Long-press the ON/OFF button for 1-2 seconds, and the backlight of the LCD will turn on.
【Note】: If the LCD does not respond after pressing the ON/OFF button, please use a 5V power adapter to connect to the DC interface of the LCD for charging.

6. Connect the Touch interface of the LCD to the USB port of the Raspberry Pi.

7. Connect the HDMI interface of the LCD to the HDMI port of the Raspberry Pi. Then power the Raspberry Pi.

Working with Smart Phone

1. Connect the 5V power adapter to the DC interface of the LCD (if the internal batteries are full, you can skip this step)

2. Long-press the ON/OFF button for 1-2 seconds, and the backlight of the LCD will turn on.

3. Connect the Type C of LCD to the Type C port of the smartphone. The LCD will display after a few seconds.

Resources

• Drawing
• putty
• Panasonic_SDFormatter-SD card formatting software
• Win32DiskImager-Burn image software

FAQ

Question:How to remove the colored squares during GPU self-test on Raspberry Pi boot-up?

 Answer:

Add the following command to /boot/config.txt:

disable_splash=1

{{{3}}}

{{{4}}}

{{{5}}}

Question:How to replace the Raspberry Pi startup logo image?

 Answer:

Replace the custom image with the image in this directory /usr/share/plymouth/themes/pix/splash.png.

{{{3}}}

{{{4}}}

{{{5}}}

Question:How to set long press touch on Raspberry Pi capacitive touch screen?

 Answer:

Test environment: 2022-04-04-raspios-bullseye-armhf 32-bit system
Supported models: Support Waveshare DSI LCD, DPI LCD, and HDMI LCD capacitive touch screen series.Only support 32bit system

Software Installation

wget https://files.waveshare.com/upload/1/18/Evdev-right-click-emulation.zip
unzip Evdev-right-click-emulation.zip
cd evdev-right-click-emulation
sudo apt install build-essential libevdev2 libevdev-dev
cd 'evdev-right-click-emulation'
sudo cp 'out/evdev-rce' '/usr/local/bin/'
sudo chmod +x '/usr/local/bin/evdev-rce'

Enter the command:

sudo evdev-rce

After running, you can touch and long press to realize the right-click function.

Set IP

sudo usermod -G 'input' -a pi
echo 'uinput' | sudo tee -a /etc/modules
sudo nano  /etc/udev/rules.d/99-uinput.rules

Add in 99-uinput.rules file.

KERNEL=="uinput", MODE="0660", GROUP="input"

save it and run it in the terminal.

sudo udevadm control --reload-rules
sudo udevadm trigger

Then reboot:

sudo reboot

Run after reboot (no sudo needed at this point).

evdev-rce

After running, you can touch and long press to realize the right-click function.

Set Startup

Enter the terminal:

sudo mkdir ~/.config/autostart
sudo nano ~/.config/autostart/right_click.desktop

Add the following in right_click.desktop.

[Desktop Entry]
Version=1.0
Type=Application
Name=evdev-rce
GenericName=Enable long-press-to-right-click gesture
Exec=env LONG_CLICK_INTERVAL=1000 LONG_CLICK_FUZZ=200  /usr/local/bin/evdev-rce
Terminal=true
StartupNotify=false

#If you want to modify the sensitivity, you can modify the size of the two parameters, LONG_CLICK_INTERVAL=1000 LONG_CLICK_FUZZ=200.

{{{5}}}

Question:What is the refresh rate of this screen?

 Answer:

60Hz

Question:Does the screen not automatically rest, or do I have to execute a command to rest the screen?

 Answer:

It depends on the system, if the system has hibernation, the screen will also be black. If it is the official system of Raspberry Pi, the default is about ten minutes without action to have hibernation.

Question:How can I check the battery level?

 Answer:

1. Use the keys on the back to open the OSD menu and find Others

2. Find this Battery display


After this setting, wait for a few seconds so that the battery will be displayed in the upper right corner.

Support

Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 AM GMT+8 (Monday to Friday)

Submit Now