13.3inch PiPad C4

13.3inch PiPad C4 13.3inch Mini-Computer Powered by Raspberry Pi CM4, HD Touch Screen

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute Category: OLEDs / LCDs, LCD, Raspberry Pi LCD {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: Website Chinese:

Onboard Interfaces USB HDMI

Related Products 15.6inch HDMI LCD (H) (with case) 15.6inch HDMI LCD (H) 15.6inch FHD Monitor 13.3inch HDMI LCD (H) (with case) V2 13.3inch HDMI LCD (H) (with case) 13.3inch HDMI LCD (H) 13.3inch Magic Mirror 13.3inch Magic Mirror C4 13.3inch PiPad 13.3inch PiPad C4 12.5inch FHD Monitor 11.6inch HDMI LCD (H) (with case) 11.6inch HDMI LCD (H) 11.9inch HDMI LCD 10.5inch HDMI AMOLED 10.1inch HDMI LCD 10.1inch HDMI LCD (B) (with case) 10.1inch HDMI LCD (E) 10.1inch HDMI LCD (G) (with case) 10.1inch HDMI LCD (H) (with case) 10.1HP-CAPQLED 9inch 2560x1600 Monitor 9HP-CAPQLED 8.8inch Side Monitor 8inch DSI LCD 8inch DSI LCD (with cam) 7.9inch HDMI LCD 7inch FHD Monitor 7inch HDMI LCD (H) (with case) 7inch HDMI LCD (C) 7inch HDMI LCD (B) 7inch HDMI LCD 7inch DPI LCD 7HP-CAPQLED 7inch DSI LCD 7inch DSI LCD (with cam) 7inch DSI LCD (with case A) 7inch DSI LCD (C) 6inch HDMI AMOLED 5inch HDMI LCD (H) 5inch HDMI LCD (H) V4 5inch HDMI LCD (G) 5inch HDMI LCD (B) 5inch HDMI LCD 5inch HDMI AMOLED 5inch DPI LCD 5inch DSI LCD 5.5inch HDMI AMOLED 4inch HDMI LCD (C) 4inch DSI LCD 4.3inch HDMI LCD (B) 4.3inch DSI LCD 4inch DSI LCD 4inch DPI LCD (B) 4inch DPI LCD (C) 4inch HDMI LCD (H) 4inch HDMI LCD 4inch RPi LCD (C) 4inch RPi LCD (A) 3.5inch DPI LCD 3.5inch HDMI LCD 3.5inch RPi LCD (C) 3.5inch RPi LCD (B) 3.5inch RPi LCD (A) 3.2inch HDMI LCD (H) 3.2inch RPi LCD (B) 2.8inch HDMI LCD (H) 2.8inch DPI LCD 2.8inch RPi LCD (A) 2.23inch OLED HAT 1.3inch OLED HAT 1.3inch LCD HAT 1.44inch LCD HAT 1.8inch LCD Module EINK-DISP-103 LCD1602 RGB Module Pico-Clock-Green Pico-RGB-Matrix-P3-64x32 RGB-Matrix-P3-64x32

Overview

This is a 13.3-inch touch all-in-one computer with a built-in Raspberry Pi CM4, which can browse web pages, play small games, etc., with 1920 x 1080 HD resolution, with toughened glass capacitive touch panel.

more

Features

• 13.3inch IPS screen,1920 x 1080 high resolution.
• Embed Raspberry Pi CM4 as controller, quad-core 64-bit Cortext-A72 [email protected], Dual-band WiFi, Bluetooth5.0.
• Toughened glass capacitive touch panel, up to 6H hardness, supports up to 10-point touch.
• Embedded ferrite Hi-Fi speaker.
• Embedded microphone and speaker.
• 75 x 75mm spacing mounting holes (M4 screw hole).
• Comes with 75° tilt angle stand.

Difference between Magic Mirror and Pipad

The only difference between the Magic Mirror and the Pipad is that the Magic Mirror uses a single-side mirror and the Pipad use Toughened Glass.

Write Raspberry Pi OS

• Download the lasted Raspberry Pi OS image from the Rasberry Pi website and write it to an empty micro SD card.
  • Write Image for Compute Module Boards eMMC version
  • Write Image for Compute Module Boards Lite version
• Create a new Txt file under the BOOT directory of the micro SD card and name it SSH.
• Modify the config.txt file which is located in the BOOT directory, and add the following lines to the config.txt file.

hdmi_group=2
hdmi_mode=82
hdmi_cvt 1920 1080 60 6 0 0 0

• Save and insert the micro SD card into Raspberry Pi.
• Connect the Magic mirror to the network and power on Raspberry Pi.
• After booting, you can access Raspberry Pi via SSH/VNC, or directly connect the keyboard and mouse.

Check the USB Audio Card

• Test the sound output device:

aplay -l

• Test the sound input device:

arecord -l

USB2.0

To reduce consumption, USB interfaces are disabled in CM4 by default. If you need to use USB ports, please add the following line to the config.txt file.

dtoverlay=dwc2,dr_mode=host

Then reboot the CM4. If you use the newest Bullseye image, the USB2.0 is set to OTG mode by default and occurs the error in CM4:

config failed, hub doesn't have any ports! (err -19)

To remove the errors, you can remove the line otg_mode=1 from the config.txt file and add the line:

dtoverlay=dwc2,dr_mode=host

Kepp Display Always On

• Modify lightdm.conf.

sudo nano /etc/lightdm/lightdm.conf

• Find the line "Xserver-command" below the [SeatDefaults] section and change it from:

#xserver-command=X

to

xserver-command=X -s 0 -dpms

• -s # – set screen saver not enabled.
• dpms turn off power saving management.
• Then save and reboot:

sudo reboot

RS232

To use the RS232 interface, please modify the config.txt file:

sudo nano /boot/config.txt

Add the following line to the file and save.

dtoverlay=uart3

RS485

To use the RS485, you need to enable the serial port of the PI.

sudo raspi-config

Choose Interface Option -> Serial -> No -> Yes, then reboot.

Keys Description

• 1: Open or Close LCD display. If you don't need the LCD for a long time, you can use this button to reduce consumption.
• 2: Direction button.
• 3: "OK" function.
• 4: Open the menu and the "Return" function.

Resources

3D Drawings

• 13.3inch HDMI LCD 3D drawings

Software

• Panasonic_SDFormatter-Formatting SD card
• Win32DiskImager-Writing SD card
• putty

Support

Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 AM GMT+8 (Monday to Friday)

Submit Now