Difference between revisions of "13.3inch PiPad C4"

From Waveshare Wiki
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 27: Line 27:
 
*Embedded ferrite Hi-Fi speaker.
 
*Embedded ferrite Hi-Fi speaker.
 
*Embedded Microphone And Speaker.
 
*Embedded Microphone And Speaker.
*75x75mm spacing mounting holes (M4 screw hole).
+
*75 x 75mm spacing mounting holes (M4 screw hole).
 
*Comes with 75° tilt angle stand.
 
*Comes with 75° tilt angle stand.
  
 
==Difference between Magic mirror and Pipad==
 
==Difference between Magic mirror and Pipad==
The only difference between the Magic mirror and the Pipad is that the Magic mirror use a one-way mirror and the Pipad use Toughened Glass
+
The only difference between the Magic mirror and the Pipad is that the Magic mirror use a one-way mirror and the Pipad use Toughened Glass.
 
</div>
 
</div>
 
<div class="tabbertab" title="User Guides">
 
<div class="tabbertab" title="User Guides">

Latest revision as of 03:47, 10 August 2022

13.3inch PiPad C4
13.3inch PiPad C4

13.3inch Mini-Computer Powered by Raspberry Pi CM4, HD Touch Screen
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Overview

This is a 13.3-inch touch all-in-one computer with a built-in Raspberry Pi CM4, which can browse web pages, play small games, etc., 1920 x 1080 HD resolution, with toughened glass capacitive touch panel.

more

Features

  • 13.3inch IPS screen,1920 x 1080 high resolution.
  • Embed Raspberry Pi CM4 as controller, quad-core 64-bit Cortext-A72 [email protected], Dual-band WiFi, Bluetooth5.0.
  • Toughened glass capacitive touch panel, 6H hardness, supports up to 10-points touch.
  • Embedded ferrite Hi-Fi speaker.
  • Embedded Microphone And Speaker.
  • 75 x 75mm spacing mounting holes (M4 screw hole).
  • Comes with 75° tilt angle stand.

Difference between Magic mirror and Pipad

The only difference between the Magic mirror and the Pipad is that the Magic mirror use a one-way mirror and the Pipad use Toughened Glass.

Write Raspberry Pi OS

hdmi_group=2
hdmi_mode=82
hdmi_cvt 1920 1080 60 6 0 0 0
  • Save and insert the micro SD card to Raspberry Pi.
  • Connect the Magic mirror to network and power on Raspberry Pi.
  • After booting, you can access Raspberry Pi via SSH/VNC, or directly connect the keyboard and mouse.

Check the USB Audio Card

  • Test the sound output device
aplay -l
  • Test the sound input device
arecord -l

USB2.0

To reduce consumption, USB interfaces are disabled in CM4 by default. If you need to use USB ports, please add the following line to config.txt file.

dtoverlay=dwc2,dr_mode=host

Then reboot the CM4. If you use the newest Bullseye image, the USB2.0 is set to OTG mode by default, and it occurs the error in CM4:

config failed, hub doesn't have any ports! (err -19)

To remove the errors, you can remove the line otg_mode=1 from config.txt file and add the line:

dtoverlay=dwc2,dr_mode=host

13.3inch PiPad C42.png

kepp display lighting all the time

  • Modify lightdm.conf
sudo nano /etc/lightdm/lightdm.conf
  • Find the line "Xserver-command" below [SeatDefaults] section and change it from
#xserver-command=X

to

xserver-command=X -s 0 -dpms
  • -s # – set screen saver not enabled
  • dpms turn off power saving management
  • Then save and reboot
sudo reboot

RS232

To use the RS232 interface, please modify the config.txt file:

sudo nano /boot/config.txt

Add the following line the file and save

dtoverlay=uart3

RS485

To use the RS485, you need to enable the serial port of PI

sudo raspi-config

Choose Interface Option -> Serial -> No -> Yes, then reboot

Keys description

13.3inch-HDMI-LCD-H-Manual-02.jpg

  • 1: Open or Close LCD display. If you don't need the LCD for long time, you can use this button to reduce consumption
  • 2: Direction button
  • 3: "OK" function
  • 4: Open menu and "Return" function


Support

If you require technical support, please go to the Support page and open a ticket.