Difference between revisions of "13.3inch HDMI LCD (H) (with case)"

From Waveshare Wiki
Jump to: navigation, search
Line 22: Line 22:
 
|More=[https://www.waveshare.com/13.3inch-hdmi-lcd-h-with-case.htm more]
 
|More=[https://www.waveshare.com/13.3inch-hdmi-lcd-h-with-case.htm more]
 
}}
 
}}
<!--
+
 
 
==Features==
 
==Features==
 
*13.3inch IPS screen,1920x1080 high resolution
 
*13.3inch IPS screen,1920x1080 high resolution
Line 89: Line 89:
  
 
== Keys description==
 
== Keys description==
 +
;13.3inch HDMI LCD (H) (with case)
 
[[File:13.3inch-HDMI-LCD-H-Manual-02.jpg]]
 
[[File:13.3inch-HDMI-LCD-H-Manual-02.jpg]]
 
*1:Open or Close LCD display. If you don't need the LCD for long time, you can use this button to reduce consumption
 
*1:Open or Close LCD display. If you don't need the LCD for long time, you can use this button to reduce consumption
Line 94: Line 95:
 
*3: "OK" function
 
*3: "OK" function
 
*4: Open menu and "Return"function
 
*4: Open menu and "Return"function
-->
+
;13.3inch HDMI LCD (H) V2 (with case)
 +
:[[File:13.3inch-hdmi-lcd-user-manual-03.jpg|400px]]
 +
*Power: Turn on/off LCD
 +
*Menu: Open OSD Menu/OK
 +
*Up/Left: Direction buttons
 +
*Down/Right: Direction buttons
 +
*Exit: Return
 
==Resource==
 
==Resource==
 
*[https://www.waveshare.com/w/upload/7/7e/13.3inch_HDMI_LCD_%28H%29.pdf 13.3inch HDMI LCD (H) (with case) User Manual PDF]
 
*[https://www.waveshare.com/w/upload/7/7e/13.3inch_HDMI_LCD_%28H%29.pdf 13.3inch HDMI LCD (H) (with case) User Manual PDF]

Revision as of 11:27, 31 July 2019

13.3inch HDMI LCD (H) (with case)
13.3inch-HDMI-LCD-H-with-Holder-1.jpg

IPS, 1920x1080, 13.3 inch Capacitive Touch Screen LCD, Supports Multi mini-PCs, Multi Systems
13.3inch HDMI LCD (H) (with case) V2
13.3inch-HDMI-LCD-H-with-Holder-1.jpg

IPS, 1920x1080, 13.3 inch Capacitive Touch Screen LCD, Supports Multi mini-PCs, Multi Systems
{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

13.3inch IPS screen, 1920x1080 high rsolution.Toughened class cover. Supports Multi mini-PCs, multi systems.

more

Features

  • 13.3inch IPS screen,1920x1080 high resolution
  • Toughened glass capacitive touch panel, 6H hardness
  • Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
    • When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free
    • When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free
  • Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.
  • 3.5mm audio jack, supports HDMI audio output
  • Embedded ferrite Hi-Fi speaker
  • Also supports VGA input (specific cable is required and should be purchased separately)
  • 75x75mm spacing mounting holes (M4 screw hole) for general wall mount
  • Comes with 75° tilt angle stand

Working with PC

This product supports Windows 10/8.1/8/7 OS.:

1. Connect 12/1A power adapter to the DC interface of LCD, after connecting the back light will light.

2. Connect the TOUCH interface of LCD to the USB interface of PC . Waiting for a moment, The touch will be recognized by Windows automatically

3. If you use HDMI, you need to connect the HDMI interface of LCD to the HDMI port of PC. About 5s later, you can see that the LCD display properly. If you need the audio, you can insert a 3.5mm earphones to HP ports.

4. Use VGA,you need to connect the VGA interface of LCD to PC's VGA ports by Mini HDMI to VGA Cable

Note:

1) If multi screen are connected to one PC at the same time, you can only control the cursor by this LCD, so please set the LCD as main screen.

2) Some of PC cannot support HDMI screen Hot Plug . In this case, restart the PC can solve.

3) HP audio output only works while using HDMI communication

4) Mini HDMI to VGA Cable is necessary and need to be purchased separately if you use VGA communication.

Calibration touch on Win 10 PC

Take the windows10 system as an example:

  • 1. Enter the Windows settings of the system, type in the search bar and click "Calibrate the screen for pen or touch input" (as shown in the picture below).

Win10 touch011.png

Win10 touch02.png
  • 2. Click "Setup" in the pop-up "Tablet PC Settings" interface:


  • 3. The following text prompt will appear on the screen. Please tap the touch screen with your finger, and the computer will recognize it as a touch screen.

【Note】If the touch screen is blank, press the "Enter" key, and the text prompt will switch to the touch screen. (The screen which displays the text prompt will be used as a touch screen!)

Win10 touch03.png

Working with Raspberry Pi

Supports Raspbian/Ubuntu mate/Windows 10 iot Core

When working with Raspberry Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not work. For more detail information, please read the following section.

Download the Raspbian image from Raspberry Pi web site. Write the image to a TF card and append the following lines to the config.txt file which is located in the root of your TF card:

max_usb_current=1
hdmi_group=2
hdmi_mode=82
hdmi_cvt 1920 1080 60 6 0 0 0

You must make sure that there are no spaces on either side of the equal sign.

Connect the Touch interface of LCD to USB port of Raspberry Pi

Connect HDMI interface of LCD to HDMI port of Raspberry Pi

Save and connect the TF card to your Pi then power up.


Keys description

13.3inch HDMI LCD (H) (with case)

13.3inch-HDMI-LCD-H-Manual-02.jpg

  • 1:Open or Close LCD display. If you don't need the LCD for long time, you can use this button to reduce consumption
  • 2:Direction button
  • 3: "OK" function
  • 4: Open menu and "Return"function
13.3inch HDMI LCD (H) V2 (with case)
13.3inch-hdmi-lcd-user-manual-03.jpg
  • Power: Turn on/off LCD
  • Menu: Open OSD Menu/OK
  • Up/Left: Direction buttons
  • Down/Right: Direction buttons
  • Exit: Return

Resource

3D Drawing

External guides

FAQ

 Answer:
This LCD gets power from two interfaces. One is the POWER port, you should connect a 12V/1A power adapter to this interface, the operating current of this interface is about 12V/0.6A. And the other one is the TOUCH interface. You need to connect this interface to the USB interface of the host, its operating current is about 5V/80mA.
{{{3}}}
{{{4}}}

{{{5}}}


Support

Support

If you require technical support, please go to the Support page and open a ticket.