Difference between revisions of "10.1inch HDMI LCD (H) (with case)"

From Waveshare Wiki
Jump to: navigation, search
 
(85 intermediate revisions by 7 users not shown)
Line 1: Line 1:
{{Infobox item|
+
<div class="wiki-pages jet-green-color">
 +
{{Infobox item
 
|name=10.1inch HDMI LCD (with case)
 
|name=10.1inch HDMI LCD (with case)
|brief=1024×600, 10.1 inch Capacitive Touch Screen LCD, Supports Multi mini-PCs, Multi Systems, Multi Interfaces
+
|caption=1024 × 600, 10.1-inch Capacitive Touch Screen LCD, Supports Multi mini-PCs, Multi Systems, Multi Interfaces
|caption=1024×600, 10.1 inch Capacitive Touch Screen LCD, Supports Multi mini-PCs, Multi Systems, Multi Interfaces
+
|img=[[File:10.1inch-HDMI-LCD-with-Holder-7.jpg|400px|{{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=http://www.waveshare.com/10.1inch-hdmi-lcd-with-case.htm}}]]
|img=[[File:10.1inch-HDMI-LCD-with-Holder-7.jpg|400px|link=http://www.waveshare.com/10.1inch-hdmi-lcd-with-case.htm]]
 
 
|category=[[:Category:OLEDs / LCDs|OLEDs / LCDs]], [[:Category:LCD|LCD]], [[:Category:Raspberry Pi LCD|Raspberry Pi LCD]]
 
|category=[[:Category:OLEDs / LCDs|OLEDs / LCDs]], [[:Category:LCD|LCD]], [[:Category:Raspberry Pi LCD|Raspberry Pi LCD]]
|manufacturer=Waveshare
+
|brand=Waveshare
 +
|{{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}=display
 
|website_cn=[http://www.waveshare.net/shop/10.1inch-HDMI-LCD-with-Holder.htm 官方中文站点]
 
|website_cn=[http://www.waveshare.net/shop/10.1inch-HDMI-LCD-with-Holder.htm 官方中文站点]
 
|website_en=[http://www.waveshare.com/10.1inch-hdmi-lcd-with-case.htm Waveshare website]
 
|website_en=[http://www.waveshare.com/10.1inch-hdmi-lcd-with-case.htm Waveshare website]
 +
|related={{Product List|Mini PC/Raspberry Pi/Displays}}
 
}}
 
}}
== Key descriptions ==
+
=Introduction=
[[File:2660-keypad.jpeg|400px]]
+
==Product description==
* Source key: For your first time using it, you should configure the corresponding signal source (when using the menu, this key can be served as Return).
+
As a universal 10.1-inch HDMI display with a resolution of 1024 × 600 and a capacitive touch panel, it supports Raspberry Pi and can also be used as a computer monitor.
* Right key: Direction key
 
* Left key: Direction key
 
* Menu key: Open the menu (when using the menu, this key can be served as Confirm)
 
* Power key: Turn on or turn off the LCD screen
 
== Menu descriptions ==
 
=== Color page ===
 
[[File:Color.jpeg]]
 
* Brightness – adjust the brightness
 
* Contrast – adjust the contrast
 
* Saturation – adjust the saturation
 
=== Menu page (On-screen Display) ===
 
[[File:OSD.jpeg]]
 
* Language – choose the menu language (English, Simplified Chinese, French, Italian, German, Spanish, Chinese Traditional and Russian)
 
* H Position – adjust the horizontal position
 
* V Position – adjust the vertical position
 
* OSD Timeout – adjust the menu display time
 
* Transparent – adjust the menu transparent
 
=== Function page ===
 
[[File:Funtion.jpeg]]
 
* Reset – reset to defaults
 
* Display Ratio – this option is generally set to 16:9 to make sure the screen display not stretched
 
* Sleep – set the time span between no-action and sleep mode (0-120 mins)
 
* Blue Screen – blue screen <font color = red> (Reserved, not supported) </font>
 
* Sharpness – adjust the sharpness
 
=== Sound page ===
 
[[File:Sound.jpeg]]
 
* Volume – adjust the volume <font color = red> (Reserved, not supported)</font>
 
== Firmware upgrade ==
 
Steps
 
# Connect the main control board to your PC with a type A to micro USB cable, and power off the main control board;
 
# Long press the Power key to power up the main control board and then release the Power key after 5 seconds;
 
# Wait for the PC loading the driver (For the first time use, it may take several minutes). If driver loading is successful, there will be 2 removable storage devices can be identified (Video and USB Touch);
 
# Copy the display firmware into the Video, and wait about 20 seconds for the main control board restart.
 
# After the board restarted, you should copy the touch firmware into the USB Touch within 5 seconds. About 1 second later, the main control board will restart again.
 
# Wait 5 seconds, the main control board may restart once more, which means the firmware has been upgraded.
 
# Power up the main control board again, and the board will start to run the new firmware.
 
  
== How to use 10.1inch HDMI LCD and Raspberry Pi (similar to other mini PC) ==
+
==Features==
=== Use the Waveshare Raspbian mirror image ===
+
* The hardware resolution is 1024 × 600.
To use the Raspberry Pi with a LCD, you should configure the original Raspberry system before using. Of course, you can also apply the ready-to-use system mirror image directly.
+
* Capacitive touch control.
# Download the corresponding image from the [[Template:10.1-inch-hdmi-lcd-img|address]].
+
* When used with Raspberry Pi, it supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems.
# Download the package file to you PC, and unzip it, then you will get a file with the expansion name .img
+
* When used as a computer monitor, it supports Windows 11/10/8.1/8/7.
# You can apply the software ADFormatter.exe to format the TF card. Notice: The capability of TF card in used here should be more than 4GB. In this operation, a TF card reader is also required, which has to be purchased separately.
+
* Support common game consoles such as Microsoft XBOX360 and Nintendo switch.
# Start the software Win32DiskImager.exe, and select the system image you downloaded, and click the button Write to program the system image.
+
* Supports multiple video input interfaces: HDMI, VGA, and AV (CVBS).
 +
* Support multi-language OSD menu (can be used for power control, adjusting brightness/contrast, etc.).
  
=== Hardware connection ===
+
==Video==
# Connect the main control board to a 10.1inch Capacitive Touch LCD with a 40 pins type 1/type A FFC cable (The FFC cable, with its contacts downwards, is connected to the RGB interface. Although LVDS interface is supported, the LVDS firmware is unavailable).
+
<youtube height=400px, width=400px>https://youtu.be/zzDlFzCuEws</youtube>
# Connect the main control board to the HDMI interface of Raspberry Pi with a HDMI cable.
+
==Working with Raspberry Pi==
# Connect Micro USB interface of the main control board to any USB interface of the Raspberry Pi with a type A to micro USB cable
+
===Software setting===
# Connect a 12V 1A power adapter to the main control board
+
Please download the latest version of the image from the [https://www.raspberrypi.com/software/operating-systems/ Raspberry Pi official website].
# Insert the TF card described above into the Raspberry Pi, and connect the Raspberry Pi to a 5V 2A power adapter (In case that you want to use some big power devices, such as camera, it is recommended to use a 5V 2.5A power adapter for the Raspberry Pi).
 
Here is the hardware connection:
 
  
[[File:clipboard.png]]
+
1. Download the compressed file to the PC, and extract the img file.<br />
=== Test steps ===
+
2. Connect the TF card to the PC and use [https://files.waveshare.com/upload/d/d7/Panasonic_SDFormatter.zip SDFormatter] to format the TF card.<br />
# Power up the main control board, and then you will see the LCD displays the current signal source of the main control board on the upper left. Then, select the option HDMI as the signal source to be used.
+
3. Open the [https://files.waveshare.com/upload/7/76/Win32DiskImager.zip Win32DiskImager] software, select the system image prepared in step 1, and click write to burn the system image.<br />
#* <font color = red> If the displayed signal source is VGA or AV, you should press the button Source, and enter the signal source selection -> use the button Right/Left to go to the option HDMI -> press the button Menu to select this signal source and confirm this selection </font>
+
4. After the programming is completed, open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt, and save it.
#* <font color = red> If there is nothing display on the LCD, please check whether the hardware connection is fine, especially the FFC cable. </font>
 
# Power up the Raspberry Pi, you can find that the screen display and the screen touch of the LCD work properly if everything is running well.
 
=== How to use Raspberry Pi with LCD without Waveshare mirror image? ===
 
==== For Raspbian ====
 
For this system, the Raspberry Pi can work with the LCD without using the Waveshare mirror image. You only need to modify the resolution of the Raspberry Pi, when working with a LCD.
 
Download the RASPBIAN mirror image from the Raspberry website, and add the lines at the end of the file config.txt:
 
 
<pre>
 
<pre>
max_usb_current=1
 
 
hdmi_group=2
 
hdmi_group=2
hdmi_mode=1
 
 
hdmi_mode=87
 
hdmi_mode=87
 
hdmi_cvt 1024 600 60 6 0 0 0
 
hdmi_cvt 1024 600 60 6 0 0 0
 
</pre>
 
</pre>
Notice: Some versions of Raspbian system may enter terminal interface with default after booted up. For easier to use LCD, it is recommended to set the relative configuration to make the system enters graphic interface directly after booted up. Please refer to the steps listed below to make the settings.
+
 
# Enter the setting of Raspbian, and run the code: <pre>sudo raspi-config</pre>
+
==Hardware connection==
# Select the option Enable Boot to Desktop/Scratch, and apply the direction keys, space key and /or carriage return key to make the settings.
+
# Connect the main control board to the 10.1inch Capacitive Touch LCD with a 40 pins FFC cable (The FFC cable, with its contacts downwards, is connected to the RGB interface. Although the LVDS interface is supported, the LVDS firmware is unavailable).
# Select the option Desktop Login as user 'Pi' at the graphical desktop.
+
# Connect the main control board to the HDMI interface of Raspberry Pi with an HDMI cable.
# When you see the hint ‘Would you like to reboot now?’, choose the option Yes to reboot the system.
+
# Connect the Micro USB interface of the main control board to any USB interface of the Raspberry Pi with a type A to micro USB cable.
==== For Ubuntu ====
+
# Connect a 12V 1A power adapter to the main control board.
Download the mirror image UBUNTU MATE from the Raspberry website, and add the lines at the end of the file config.txt:
+
# Insert the TF card described above into the Raspberry Pi, and connect the Raspberry Pi to a 5V 2.5A power adapter (In case you want to use some big power devices, such as a camera, it is recommended to use a 5V 3A power adapter for the Raspberry Pi).
<pre>
+
*Here is the hardware connection:<br/>
max_usb_current=1
+
[[File:Clipboard.png]]
hdmi_group=2
+
 
hdmi_mode=1
+
== Using steps ==
hdmi_mode=87
+
# First power on the main control board, Normally, you can see that the upper left corner of the LCD will display the signal source of the main control board at this time. Here you need to select HDMI.
hdmi_cvt 1024 600 60 6 0 0 0
+
#* <font color = red>If the displayed signal source is VGA or AV, you need to press the Source button to select the signal source.</font>
</pre>
+
#* <font color = red>If the LCD doesn't show anything, please check the hardware connection, especially if the FFC wire is connecting well.</font>
==== For Windows 10 IoT Core ====
+
# Power on the Raspberry Pi, and wait a few seconds, you can see the LCD display normally.
Download the file Windows 10 IoT Core from the Microsoft website, and make the mirror image file Windows 10 IoT Core according to the tutorial, then, program the image file into the TF card. Find out the file config.txt under the root directory in the TF card, and add the lines at the end of the file:
+
# If it is found that the touch function is abnormal, run the following commands, and the touch function can be used normally after restarting.
<pre>
+
<syntaxhighlight lang="c">
max_usb_current=1
+
sudo apt-get install xserver-xorg-input-evdev
hdmi_group=2
+
sudo mv /usr/share/X11/xorg.conf.d/40-libinput.conf /usr/share/X11/xorg.conf.d/40-libinput.conf_bak
hdmi_mode=1
+
reboot
hdmi_mode=87
+
</syntaxhighlight>
hdmi_cvt 1024 600 60 6 0 0 0
+
 
</pre>
+
== Use with PC ==
{{10.1-inch-hdmi-lcd-img}}
+
Support PC version Windows 11/10/8.1/8/7 system.
==Support==
+
 
{{Service00}}
+
== Hardware connection ==
 +
# Connect the main control board and the 10.1inch Capacitive Touch LCD with a 40pin co-directional FFC cable (the metal side of the FFC cable is connected to the RGB interface facing down, the hardware supports the LVDS interface, but the LVDS firmware is not provided yet).
 +
# Connect the main control board and the HDMI port of the PC with an HDMI cable.
 +
# Use a type A to micro USB cable to connect the Micro USB port of the main control board to any one of the USB ports of the PC.
 +
# Connect the main control board to a 12V 1A power adapter.
 +
 
 +
== Using steps ==
 +
# Power on the main control board first. You can see that the upper left corner of the LCD will display the signal source of the main control board at this time. Here you need to select HDMI.
 +
#* <font color = red> If the displayed signal source is VGA or AV, you need to press the Source button to select the signal source. </font>
 +
#* <font color = red> If the LCD doesn't show anything, please check the hardware connection, especially if the FFC wire is connecting well. </font>
 +
# Power on the PC, and wait for a few seconds, you can see that the LCD displays normally.
 +
 
 +
==Key descriptions ==
 +
* Source key: For your first time using it, you should configure the corresponding signal source (when using the menu, this key can be served as Return).
 +
* Right key: Direction key
 +
* Left key: Direction key
 +
* Menu key: Open the menu (when using the menu, this key can be served as Confirm).
 +
* Power key: Turn on or turn off the LCD screen.
 +
[[File:2660-keypad.jpeg]]
 +
 
 +
=Resourse=
 +
==Document==
 +
*[https://files.waveshare.com/upload/c/c1/10.1inch_HDMI_LCD_H_panel_dimension.pdf 10.1inch HDMI LCD (H) Display Area]
 +
*[https://files.waveshare.com/upload/8/8b/10.1inch_HDMI_LCD_%28H%29_3D_Drawing.zip 10.1inch HDMI LCD (H) 3D Drawing]
 +
==Software==
 +
*[https://files.waveshare.com/upload/d/d7/Panasonic_SDFormatter.zip Panasonic SDFormatter]
 +
*[https://files.waveshare.com/upload/7/76/Win32DiskImager.zip Win32DiskImager]
 +
*[https://files.waveshare.com/upload/5/56/Putty.zip PuTTY]
 +
 
 +
=FAQ=
 +
{{FAQ|What is the motherboard size of the 10.1inch HDMI LCD (H)?|
 +
 +
[[File:10.1inch HDMI LCD H FAQ01.jpg]]
 +
|||}}
 +
 
 +
{{FAQ|What is the use of the red and blue interfaces on the main control board?
 +
 +
|[[File:Lcdh-fa.png|thumb]]
 +
 
 +
The red one is the power input.
 +
 
 +
The blue one is used to connect the speaker.
 +
|||}}
 +
 
 +
=Support=
 +
{{Servicebox1}}
 +
[[Category:OLEDs / LCDs|OLEDs / LCDs]] [[Category:Raspberry Pi|Raspberry Pi]] [[Category:Raspberry Pi LCD|Raspberry Pi LCD]]
 +
</div>

Latest revision as of 06:41, 1 November 2023

10.1inch HDMI LCD (with case)
10.1inch-HDMI-LCD-with-Holder-7.jpg

1024 × 600, 10.1-inch Capacitive Touch Screen LCD, Supports Multi mini-PCs, Multi Systems, Multi Interfaces
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

Product description

As a universal 10.1-inch HDMI display with a resolution of 1024 × 600 and a capacitive touch panel, it supports Raspberry Pi and can also be used as a computer monitor.

Features

  • The hardware resolution is 1024 × 600.
  • Capacitive touch control.
  • When used with Raspberry Pi, it supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems.
  • When used as a computer monitor, it supports Windows 11/10/8.1/8/7.
  • Support common game consoles such as Microsoft XBOX360 and Nintendo switch.
  • Supports multiple video input interfaces: HDMI, VGA, and AV (CVBS).
  • Support multi-language OSD menu (can be used for power control, adjusting brightness/contrast, etc.).

Video

Working with Raspberry Pi

Software setting

Please download the latest version of the image from the Raspberry Pi official website.

1. Download the compressed file to the PC, and extract the img file.
2. Connect the TF card to the PC and use SDFormatter to format the TF card.
3. Open the Win32DiskImager software, select the system image prepared in step 1, and click write to burn the system image.
4. After the programming is completed, open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt, and save it.

hdmi_group=2
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0

Hardware connection

  1. Connect the main control board to the 10.1inch Capacitive Touch LCD with a 40 pins FFC cable (The FFC cable, with its contacts downwards, is connected to the RGB interface. Although the LVDS interface is supported, the LVDS firmware is unavailable).
  2. Connect the main control board to the HDMI interface of Raspberry Pi with an HDMI cable.
  3. Connect the Micro USB interface of the main control board to any USB interface of the Raspberry Pi with a type A to micro USB cable.
  4. Connect a 12V 1A power adapter to the main control board.
  5. Insert the TF card described above into the Raspberry Pi, and connect the Raspberry Pi to a 5V 2.5A power adapter (In case you want to use some big power devices, such as a camera, it is recommended to use a 5V 3A power adapter for the Raspberry Pi).
  • Here is the hardware connection:

Clipboard.png

Using steps

  1. First power on the main control board, Normally, you can see that the upper left corner of the LCD will display the signal source of the main control board at this time. Here you need to select HDMI.
    • If the displayed signal source is VGA or AV, you need to press the Source button to select the signal source.
    • If the LCD doesn't show anything, please check the hardware connection, especially if the FFC wire is connecting well.
  2. Power on the Raspberry Pi, and wait a few seconds, you can see the LCD display normally.
  3. If it is found that the touch function is abnormal, run the following commands, and the touch function can be used normally after restarting.
sudo apt-get install xserver-xorg-input-evdev
sudo mv /usr/share/X11/xorg.conf.d/40-libinput.conf /usr/share/X11/xorg.conf.d/40-libinput.conf_bak
reboot

Use with PC

Support PC version Windows 11/10/8.1/8/7 system.

Hardware connection

  1. Connect the main control board and the 10.1inch Capacitive Touch LCD with a 40pin co-directional FFC cable (the metal side of the FFC cable is connected to the RGB interface facing down, the hardware supports the LVDS interface, but the LVDS firmware is not provided yet).
  2. Connect the main control board and the HDMI port of the PC with an HDMI cable.
  3. Use a type A to micro USB cable to connect the Micro USB port of the main control board to any one of the USB ports of the PC.
  4. Connect the main control board to a 12V 1A power adapter.

Using steps

  1. Power on the main control board first. You can see that the upper left corner of the LCD will display the signal source of the main control board at this time. Here you need to select HDMI.
    • If the displayed signal source is VGA or AV, you need to press the Source button to select the signal source.
    • If the LCD doesn't show anything, please check the hardware connection, especially if the FFC wire is connecting well.
  2. Power on the PC, and wait for a few seconds, you can see that the LCD displays normally.

Key descriptions

  • Source key: For your first time using it, you should configure the corresponding signal source (when using the menu, this key can be served as Return).
  • Right key: Direction key
  • Left key: Direction key
  • Menu key: Open the menu (when using the menu, this key can be served as Confirm).
  • Power key: Turn on or turn off the LCD screen.

2660-keypad.jpeg

Resourse

Document

Software

FAQ


 Answer:
Lcdh-fa.png

The red one is the power input.

The blue one is used to connect the speaker.


Support



Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 AM GMT+8 (Monday to Friday)