Difference between revisions of "10.1inch HDMI LCD (H) (with case)"

From Waveshare Wiki
Jump to: navigation, search
m (Text replacement - "{{#urlget:amazon|default}}=display" to "{{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}=display")
m (Text replacement - "default={{#urlget:amazon|default}}" to "default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}")
Line 2: Line 2:
 
|name=10.1inch HDMI LCD (with case)
 
|name=10.1inch HDMI LCD (with case)
 
|caption=1024×600, 10.1 inch Capacitive Touch Screen LCD, Supports Multi mini-PCs, Multi Systems, Multi Interfaces
 
|caption=1024×600, 10.1 inch Capacitive Touch Screen LCD, Supports Multi mini-PCs, Multi Systems, Multi Interfaces
|img=[[File:10.1inch-HDMI-LCD-with-Holder-7.jpg|400px|{{Amazon_nolink|default={{#urlget:amazon|default}}|url=link=http://www.waveshare.com/10.1inch-hdmi-lcd-with-case.htm}}]]
+
|img=[[File:10.1inch-HDMI-LCD-with-Holder-7.jpg|400px|{{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=http://www.waveshare.com/10.1inch-hdmi-lcd-with-case.htm}}]]
 
|category=[[:Category:OLEDs / LCDs|OLEDs / LCDs]], [[:Category:LCD|LCD]], [[:Category:Raspberry Pi LCD|Raspberry Pi LCD]]
 
|category=[[:Category:OLEDs / LCDs|OLEDs / LCDs]], [[:Category:LCD|LCD]], [[:Category:Raspberry Pi LCD|Raspberry Pi LCD]]
 
|brand=Waveshare
 
|brand=Waveshare

Revision as of 11:46, 12 May 2022

10.1inch HDMI LCD (with case)
10.1inch-HDMI-LCD-with-Holder-7.jpg

1024×600, 10.1 inch Capacitive Touch Screen LCD, Supports Multi mini-PCs, Multi Systems, Multi Interfaces
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

Product description

This product is a general-purpose 10.1inch HDMI display with a resolution of 1024×600 and a capacitive touch panel. Supports Raspberry Pi and can also be used as a computer monitor.

Features

  • The hardware resolution is 1024×600
  • Capacitive touch control
  • When used with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems
  • When used as a computer monitor, supports Windows 11/10/8.1/8/7
  • Support common game consoles such as Microsoft XBOX360 and Nintendo switch
  • Supports multiple video input interfaces: HDMI, VGA and AV (CVBS)
  • Support multi-language OSD menu (can be used for power control, adjust brightness/contrast, etc.)

Video

Working with Raspberry Pi

Software setting

Please download the latest version of the image from the Raspberry Pi official website.

1. Download the compressed file to the PC, and extract the img file.
2. Connect the TF card to the PC and use SDFormatter to format the TF card.
3. Open the Win32DiskImager software, select the system image prepared in step 1, and click write to burn the system image.
4. After the programming is completed, open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt and save it

hdmi_group=2
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0

Hardware connection

  1. Connect the main control board to the 10.1inch Capacitive Touch LCD with a 40 pins FFC cable (The FFC cable, with its contacts downwards, is connected to the RGB interface. Although LVDS interface is supported, the LVDS firmware is unavailable).
  2. Connect the main control board to the HDMI interface of Raspberry Pi with a HDMI cable.
  3. Connect Micro USB interface of the main control board to any USB interface of the Raspberry Pi with a type A to micro USB cable
  4. Connect a 12V 1A power adapter to the main control board
  5. Insert the TF card described above into the Raspberry Pi, and connect the Raspberry Pi to a 5V 2.5A power adapter (In case that you want to use some big power devices, such as camera, it is recommended to use a 5V 3A power adapter for the Raspberry Pi).

Here is the hardware connection:

Clipboard.png

Using steps

  1. First power on the main control board, Normally, you can see that the upper left corner of the LCD will display the signal source of the main control board at this time. Here you need to select HDMI.
    • If the displayed signal source is VGA or AV, you need to press the Source button to select the signal source.
    • If the LCD doesn't show anything, please check the hardware connection, especially if the FFC wire is connecting well.
  2. Power on the Raspberry Pi, wait a few seconds, you can see the LCD display normally.
  3. If it is found that the touch function is abnormal, run the following commands, and the touch function can be used normally after restarting.
sudo apt-get install xserver-xorg-input-evdev
sudo mv /usr/share/X11/xorg.conf.d/40-libinput.conf /usr/share/X11/xorg.conf.d/40-libinput.conf_bak
reboot

Use with PC

Support PC version Windows 11/10/8.1/8/7 system.

Hardware connection

  1. Connect the main control board and the 10.1inch Capacitive Touch LCD with a 40pin co-directional FFC cable (the metal side of the FFC cable is connected to the RGB interface facing down, the hardware supports the LVDS interface, but the LVDS firmware is not provided yet).
  2. Connect the main control board and the HDMI port of the PC with an HDMI cable.
  3. Use a type A to micro USB cable to connect the Micro USB port of the main control board to any one of the USB ports of the PC.
  4. Connect the main control board to a 12V 1A power adapter.

Using steps

  1. Power on the main control board first. You can see that the upper left corner of the LCD will display the signal source of the main control board at this time. Here you need to select HDMI.
    • If the displayed signal source is VGA or AV, you need to press the Source button to select the signal source.
    • If the LCD doesn't show anything, please check the hardware connection, especially if the FFC wire is connecting well.
  2. Power on the PC, wait for a few seconds, you can see that the LCD displays normally.

Key descriptions

2660-keypad.jpeg

  • Source key: For your first time using it, you should configure the corresponding signal source (when using the menu, this key can be served as Return).
  • Right key: Direction key
  • Left key: Direction key
  • Menu key: Open the menu (when using the menu, this key can be served as Confirm)
  • Power key: Turn on or turn off the LCD screen

Resourse

Software

FAQ


 Answer:

The red one is power input

The blue one is use to connect the speaker.


Support

Support

If you require technical support, please go to the Support page and open a tickets.