10.1inch HDMI LCD (B) (with case)
| ||
Introduction
IPS, 1280×800, 10.1 inch Capacitive Touch Screen LCD, Supports Multi mini-PCs, Multi Systems
How to use
1. With Raspberry Pi: Connect the LCD to your Pi (HDMI Port of LCD -> HDMI Port of Pi; USB Port of LCD -> USB Port of Pi; 5V~2A power supply). Download the Raspbian image from Raspberry Pi web site. Write the image to a TF card and add the following code to the end of /boot/config.txt:
max_usb_current=1 hdmi_group=2 hdmi_mode=1 hdmi_mode=87 hdmi_cvt 1280 800 60 6 0 0 0
Save and connect the TF card to your Pi then power up.
2. Without Raspberry Pi: A PC (Windows 10 / 8.1 / 8 / 7) is required which cannot connect with other display device. Connect the LCD to your PC (USB Port of LCD -> USB Port of PC; HDMI Port of LCD -> HDMI Port of PC. Please first connect the USB Ports then connect the HDMI Port). A new touch drive is recognized by Windows and after the driver successfully installed, you can use the LCD as a human interface device.
Support
Support
If you require technical support, please go to the Support page and open a ticket.