Difference between revisions of "10.1inch HDMI LCD"

From Waveshare Wiki
Jump to: navigation, search
Line 17: Line 17:
 
{{Amazon|{{#urlget:amazon|default}}=display
 
{{Amazon|{{#urlget:amazon|default}}=display
 
|More = [http://www.waveshare.com/10.1inch-hdmi-lcd.htm More]}}
 
|More = [http://www.waveshare.com/10.1inch-hdmi-lcd.htm More]}}
{{10.1inch HDMI LCD Manual}}
 
  
 
== Version ==
 
== Version ==
Line 25: Line 24:
  
 
New RTD2660 version could replace the old TFP401 version in most situation. If you want the old version, please kindly contact us.
 
New RTD2660 version could replace the old TFP401 version in most situation. If you want the old version, please kindly contact us.
 
 
To differentiate these two version, you can refer to the pictures below, the left is the new on, RTD2660 version, and the right is TFP401 version.
 
To differentiate these two version, you can refer to the pictures below, the left is the new on, RTD2660 version, and the right is TFP401 version.
 
[[File:10.1inch-HDMI-LCD-Manual-03-01.jpg|800px]]
 
[[File:10.1inch-HDMI-LCD-Manual-03-01.jpg|800px]]

Revision as of 07:07, 13 January 2018

10.1inch HDMI LCD
1024×600
10.1inch-HDMI-LCD-1.jpg

10.1inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

10.1inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi

More

Version

Since from December 2017, The display of 10.1inch HDMI LCD has been updated to RTD2660 instead of TFP401.

The new version improves the compatibility with various device. New version has 5 Keys on the backside, user could use them to change the brightness and contrast ratio of LCD.

New RTD2660 version could replace the old TFP401 version in most situation. If you want the old version, please kindly contact us. To differentiate these two version, you can refer to the pictures below, the left is the new on, RTD2660 version, and the right is TFP401 version. 10.1inch-HDMI-LCD-Manual-03-01.jpg

Resource

Driver

The driver can be downloaded from github

git clone https://github.com/waveshare/LCD-show.git

LCD Panel Dimension

Software

Image

Description: if you felt hard to install driver, try the image with driver pre-installed.

LCD Panel Dimension

FAQ

 Answer:
The LCD must have a driver installed for normal use. For details, please refer to the relevant introduction in the user manual.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
Since the Raspberry Pi image and version are frequently updated, if you encounter a situation where the LCD cannot be used normally, please download the latest version of the image provided by us or from the official website of Raspberry Pi and install the latest driver provided by us.
  • Make sure the hardware connection is correct and the contact is good.
  • Make sure that TF card programming is normal.
  • When the Raspberry Pi starts normally, the PWR light is always on, and the ACT light is flashing. If it is found that both lights are always on, it may be that the TF card is not successfully programmed to the image or the TF card is in poor contact with the Raspberry Pi.
  • It is recommended to use a 5V 2.5A power adapter for the Raspberry Pi. If the Raspberry Pi is powered by the USB port of the PC, the Raspberry Pi may not be able to start normally due to an insufficient power supply.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
Commercial grade (0~70 degrees Celsius).
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
When working with 5V input, the current is about 200mA.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
When working with 5V input, the current is about 550mA with back light on and 100mA with back light off.
{{{3}}}
{{{4}}}

{{{5}}}


Anti-Piracy

Since the first-generation Raspberry Pi released, Waveshare has been working on designing, developing, and producing various fantastic touch LCDs for the Pi. Unfortunately, there are quite a few pirated/knock-off products in the market. They're usually some poor copies of our early hardware revisions, and comes with none support service.

To avoid becoming a victim of pirated products, please pay attention to the following features when purchasing:

RPi-LCD-Anti-Piracy.jpg

(Click to enlarge)

Support

Support

If you require technical support, please go to the Support page and open a ticket.